MoreSense MS-07 Air Quality Monitor with ESP32-S3 and SEN66
https://www.electronics-lab.com/moresense-ms-07-air-quality-monitor-with-esp32-s3-and-sen66/
ESP32-S3-based air quality monitor with SEN66 sensor, touchscreen UI, MQTT, REST API, and local data logging support.
LILYGO T-Halow P4 and T5 E-Paper S3 Pro Lite ESP32 Development Board Target IoT and Portable Display Applications
https://www.electronics-lab.com/lilygo-t-halow-p4-and-t5-e-paper-s3-pro-lite-esp32-development-board-target-iot-and-portable-display-applications/
Two new LILYGO boards combine long-range WiFi HaLow connectivity and a low-power ESP32-S3 e-paper display platform for wireless IoT and portable interface projects.
Diptyx ESP32-S3 Open-Source Dual-Screen E-Reader Funded
https://www.electronics-lab.com/diptyx-esp32-s3-open-source-dual-screen-e-reader-funded/
An ESP32-S3 e-reader with dual e-ink displays, open hardware and firmware, microSD storage, and a foldable book-style design focused on ownership and repairability.
ESP32-S3 Smart 86 Box – A 86-Type IoT Controller With 4-inch Display, Audio, IMU & Battery
https://www.electronics-lab.com/esp32-s3-smart-86-box-a-86-type-iot-controller-with-4-inch-display-audio-imu-and-battery-support/
Waveshare's ESP32-S3-based 86-type IoT controller with a 4-inch touch display, audio codec, IMU, Wi-Fi/BLE, and rich expansion for smart panels, HMI, and IoT control systems.
Home Assistant Connect ZBT-2 USB Adapter Supports Zigbee, Thread, and Matter
https://www.electronics-lab.com/home-assistant-connect-zbt-2-usb-adapter-supports-zigbee-thread-and-matter/
The ZBT-2 is an upgraded USB smart home adapter with a stronger antenna, faster MG24 chip, and support for Zigbee, Thread, and Matter for Home Assistant setups.
Waveshare ESP32-S3 Smart 86 Box Targets AI-Enabled Smart Home and HMI Projects
https://www.electronics-lab.com/waveshare-esp32-s3-smart-86-box-targets-ai-enabled-smart-home-and-hmi-projects/
ESP32-S3 Smart 86 Box integrates Wi-Fi, Bluetooth, touch display, audio, and AI voice support for smart home and industrial control applications
CamThink NeoEyes NE101: A Modular AI Vision Camera with ESP32
https://www.electronics-lab.com/camthink-neoeyes-ne101-a-modular-ai-vision-camera-with-esp32/
The CamThink NeoEyes NE101 is a modular, low-power AI camera with a 5MP sensor. It features an ESP32-S3 chip and supports multiple connectivity options.
LILYGO T-Display Bar: ESP32-S3 Board with Touchscreen & AI Sensor
https://www.electronics-lab.com/lilygo-t-display-bar-esp32-s3-board-with-2-25-inch-rgb-ips-touch-display-wi-fi-bluetooth-sensors-and-expansion-options/
This compact ESP32-S3 board features a 2.25" color touchscreen, Wi-Fi, and Bluetooth. It includes an AI smart sensor and IMU for fitness tracking and other DIY projects.
ESP32-S3 PoE AI Camera Board Makes Your Legacy Utility Meter Digital and IoT Enabled
https://www.electronics-lab.com/esp32-s3-poe-ai-camera-board-makes-your-legacy-utility-meter-digital-and-iot-enabled/
This is an ESP32-S3 development board (16 MB flash, 8 MB RAM) that is compatible with the AI-on-the-Edge-Device framework. It integrates Ethernet with PoE, a micro-SD card slot, a camera with WS2812B back-lighting LEDs, a Stemma QT connector, comprehensive battery management, and a low-power sleep mode that draws just 20 µA.
Elecrow 5.79-Inch Low-Power E-paper Display Review
https://www.electronics-lab.com/elecrow-5-79-inch-low-power-e-paper-display-review-sharp-monochrome-screen-with-deep-sleep-partial-refresh-and-sunlight-readability/
This CrowPanel ESP32 5.79” electronic paper HMI display has a sharp monochrome screen with deep sleep, partial refresh, and sunlight readability.