MCP2221 HID Library
https://www.electronics-lab.com/mcp2221-hid-library/
Zak’s Electronics Blog published a new library and breakout board for MCP2221 USB to UART interface IC: This is a library for interfacing with the HID features of the MCP2221 USB to UART and I2C/SMBus serial converter from Microchip. The converter includes 4 GPIO pins, 3x 10-bit ADCs, 1x 5-bit DAC and more. Microchip does provide […]
8T49N004 Programmable Femtoclock® NG with 4-outputs
https://www.electronics-lab.com/8t49n004-programmable-femtoclock-ng-with-4-outputs/
This design features a fourth generation programmable femtoclock that provides reference frequencies to replace crystals and SAW oscillators in high-performance applications. It is programmable through I2C interface. It has four selectable LVPECL or LVDS via I2C while its FemtoClock NG VCO ranges between 1.9GHz to 2.55GHz. It also meets the standard interface requirements of PCI […]
ESP8266 MQTT battery monitor project
https://www.electronics-lab.com/esp8266-mqtt-battery-monitor-project/
Steve’s latest project, a wireless MQTT battery monitor: This board uses an ESP8266 (ESP12), a Texas Instruments INA226 I2C voltage and current monitor, and a Texas Instruments LMR12010X buck converter. This board is designed to wirelessly monitor 12 volt batteries and power supplies using an external current shunt resistor. The voltage across the shunt resistor […]
Buck battery charger handles multiple chemistries
https://www.electronics-lab.com/buck-battery-charger-handles-multiple-chemistries/
by Susan Nordyk @ edn.com: The LTC4015 synchronous step-down battery charger controller from Linear Technology offers charge current of up to 20 A, multiple-chemistry operation, and onboard digital telemetry. The controller transfers power from a variety of input sources, such as wall adapters and solar panels, to a Li-Ion polymer, LiFePO4, or lead-acid battery stack with […]
IO expander board
https://www.electronics-lab.com/io-expander-board/
I/O Expander Board offers a convenient way to interface upto 16 I/O pins in your project using SPI/I2C bus. This kit uses the famous MCP23S17 IO chip from Microhip. Specifications Supply sourced through the interfacing Box Header connector The kit has 2 separate Box Header type connector for the 16 pins of I/O port and […]
EEPROM Module
https://www.electronics-lab.com/eeprom-module/
EEPROM Add-On Board offers an easy way to interface a standard 24Cxx type I2C EEPROM to your project. Specifications 5 VDC supply sourced through the interfacing Box Header connector Jumper selectable address option available Four mounting holes 3.2 mm each PCB dimensions 36 mm x 32 mm EEPROM Module – [Link]
16-Bit I2C-Bus LED Dimmer
https://www.electronics-lab.com/16-bit-i2c-bus-led-dimmer/
This project is devised for LED dimming using NXP Semiconductors’ PCA9532 16-Bit I2C-Bus LED dimmer. A lot of solid-state lighting applications require control over the emitted intensity of light for both functional and aesthetic requirements. Some of these applications also require a full dimming capability from fully ON to fully OFF. LED dimming potentially improves […]