LoraDunchy – Arduino Compatibile LoRa module
https://www.electronics-lab.com/loradunchy-arduino-compatibile-lora-module/
Lora board with Arduino nano compatibile pinout and simple battery management. Small board with arduino nano compatibile pinout with power management and Murata ABZ LoRa module with STM32L0 microcontroller Features: LoRa module: Murata ABZ Single cell LiPo cell charger on-board with charging signal internally connected to PA11 (via jumper) Buck/Boost switching power supply for delivering […]
LoRa-to-Ethernet Gateway
https://www.electronics-lab.com/lora-ethernet-gateway/
A WIZ750SR based device that allows sending and receiving messages over LoRa and LoRaWAN. I got some LoRa modules with SPI communication interface. One of the options it would have been to connect them to my Raspberry Pi. But, I didn’t really like the idea because I already have some stuff connected to my Raspberry […]
LoRa module in DIL form
https://www.electronics-lab.com/lora-module-dil-form/
Mare writes: Murata produces LoRa module CMWX1ZZABZ-xxx based on SX1276 transceiver and STM32L072CZ microcontroller. The soldering of the LGA module is not very hobby-friendly. I constructed small breakout PCB for this module with additional buck/boost switcher and place for SMA connector. The transceiver features the LoRa®long-range modem, providing ultra-long-range spread spectrum communication and high interference […]
SODAQ ONE board – GPS + LoRa + Solar charger
https://www.electronics-lab.com/sodaq-one-board-gps-lora-solar-charger/
This is the third generation of our succesful SODAQ ONE board. It is equipped with a solar charge controller and runs on a LiPo or a permanent battery. It has the Ublox Eva 8M GPS module which is not only miniature but with it’s assisted GPS feature it can get a fix within seconds. We’ve now added […]
Fennec: LoRa Development Board
https://www.electronics-lab.com/fennec-lora-development-board/
An ultra low power LoRa sensor node powered by just one CR2032 batter. By Harm Wouter Snippe: Do you want to measure temperature, connect a soil humidity sensor in your vegetable garden or monitor the air quality at your street corner? With the Fennec Development Board you are able to connect almost any sensor and […]
LoRaCatKitty: Build IoT Applications with LoRa in 3 steps!
https://www.electronics-lab.com/loracatkitty-build-iot-applications-lora-3-steps/
Based on the ESP8266 module, “Andres Sabas” unite the best of WiFi and LoRa, Facilitating the development of IoT solutions. LoRaCatKitty is designed to simplify the development of Internet of Things (IoT) applications using the fabulous (but still underutilized) LoRa Technology. We have based our development on the ESP8266 WiFi module and the LoRa RN2903 […]
LoRa IOT Home Environment Monitoring System
https://www.electronics-lab.com/lora-iot-home-environment-monitoring-system/
RodNewHampshire @ instructables.com writes: The LoRa IOT Home Environmental Monitoring System consists of an Arduino Mega based IOT-to-Internet gateway and Arduino Feather based remote stations with environmental sensors. The remote stations communicate wirelessly with the gateway using LoRa radios. LoRa IOT Home Environment Monitoring System – [Link]
FiPy, The Future IoT Module
https://www.electronics-lab.com/fipy-future-iot-module/
The hardware startup Pycom have been working hard to create a fast-develop-and-connect hardware portfolio, a portal and gathered enough developer manpower to unleash the IoT growth potential. Pycom has just launched its newest product: FiPy! FiPy is the new IoT module that connects your device to other networks. According to what the company describes, it […]
Badgerboard, LoRa Future IoT Development Board
https://www.electronics-lab.com/badgerboard-lora-future-iot-development-board/
The LoRa Alliance™ is an open, non-profit association of members who believe that the Internet of Things era is now, its LoRaWAN is a Low Power Wide Area Network with features that support low-cost, mobile, and secure bidirectional communication for Internet of Things (IoT), machine-to-machine (M2M), smart city, and industrial applications. LoRaWAN is optimized for […]
Marvin, A Plug & Play IoT Development Board
https://www.electronics-lab.com/marvin-plug-play-iot-development-board/
Internet of Things became one of the most important technology trends nowadays, and everyday we have a new board or tool that helps people to create IoT application. Today, we introduce you to “Marvin”, a new IoT board developed at RDM Makerspace. Marvin is an easy to use, plug and play development board for rapid […]