Texas Instruments TPSM265R1 Power Module with Ultra-Low IQ
https://www.electronics-lab.com/texas-instruments-tpsm265r1-power-module-with-ultra-low-iq/
Texas Instruments TPSM265R1 Power Module with Ultra-Low IQ is a compact, easy-to-use module that fully integrates a controller, MOSFETs, and an output inductor. The TPSM265R1 Power Module operates over a wide input voltage range up to a maximum continuous input voltage of 65V. The Power Module is designed to quickly and easily implement a power […]
Infineon CoolSiCTM MOSFET for 650 V, 1200 V, and 1700 V at Rutronik
https://www.electronics-lab.com/infineon-coolsictm-mosfet-for-650-v-1200-v-and-1700-v-at-rutronik/
Infineon’s CoolSiC™ MOSFETs use an optimized, state-of-the-art trench semiconductor process that enables both the lowest losses in the application and the highest reliability in operation. The products, with voltage classes of 1700 V, 1200 V, and 650 V and forward resistances from 27 mΩ up to 1000 mΩ, are ideally suited for integration in applications […]
onsemi NTHL045N065SC1 Silicon Carbide (SiC) MOSFET
https://www.electronics-lab.com/onsemi-nthl045n065sc1-silicon-carbide-sic-mosfet/
onsemi NTHL045N065SC1 Silicon Carbide (SiC) MOSFET uses a completely new technology that provides superior switching performance and high reliability compared to Silicon. This compact chip-sized MOSFET is designed with low ON resistance and ensures low capacitance and gate charge. The NTHL045N065SC1 MOSFET features high efficiency, faster-operating frequency, increased power density, reduced EMI, and reduced system […]
STMicroelectronics STELPD01 Electronic Load Switch
https://www.electronics-lab.com/stmicroelectronics-stelpd01-electronic-load-switch/
STMicroelectronics STELPD01 Electronic Load Switch is an integrated electronic power switch for power rail protection applications. It can precisely detect and react to overcurrent and overvoltage conditions. When an overload condition occurs, the device goes into an open state, disconnecting the load from the power supply. An external power MOSFET can be driven to manage […]
High Current Half-Bridge with Over Current Shutdown
https://www.electronics-lab.com/high-current-half-bridge-with-over-current-shutdown/
The project presented here is a versatile high voltage Half-Bridge with Over-Current Shutdown. The project is built using LT1158 IC from Analog Devices. It is suited for many applications as listed below. A single input pin on the LT1158 synchronously controls two N-channel power MOSFETs IRF3710 in a totem pole configuration. Unique adaptive protection against […]
Fixed Input Push-Pull Driver Controller with Highly Symmetrical Power MOSFETs and Under Voltage Protection
https://www.electronics-lab.com/fixed-input-push-pull-driver-controller-with-highly-symmetrical-power-mosfets-and-under-voltage-protection/
MORNSUN has introduced two new drivers SCM1201BTA and SCM1212BTA that feature integrated MOSFETs for the primary side of a push-pull power and can be used in the 1-2W applications with 3.3V and 5V inputs. These new series with wide input voltage range of 2.7-5.5V will not be damaged even under the high input voltage up […]
Diodes Incorporated DZDH0401DW Ideal Diode Controller
https://www.electronics-lab.com/diodes-incorporated-dzdh0401dw-ideal-diode-controller/
Diodes Incorporated DZDH0401DW Ideal Diode Controller is designed to drive a p-channel enhancement MOSFET configured as an ideal diode. This controller operates as a differential amplifier and PMOS controller to minimize forward current losses when VIN > VOUT. The DZDH0401DW controller provides high isolation when VIN < VOUT. This controller compares the voltage between input and […]
Texas Instruments TPS1HB08-Q1 Smart High-Side Switch
https://www.electronics-lab.com/texas-instruments-tps1hb08-q1-smart-high-side-switch/
Texas Instruments TPS1HB08-Q1 Smart High-Side Switch is intended for use in 12V automotive systems. The device integrates robust protection and diagnostic features to ensure output port protection, even during harmful events like short circuits in automotive systems. The device protects against faults through a reliable current limit, which, depending on the device variant, is adjustable […]
TPSM63606 High-Density 6 A Power Module
https://www.electronics-lab.com/tpsm63606-high-density-6-a-power-module/
Texas Instruments’ module is a highly-integrated 36 V DC/DC solution that comes in an enhanced HotRod™ QFN package Texas Instruments’ TPSM63606 is a highly integrated 6 A, DC/DC synchronous buck power module that combines power MOSFETs, a shielded inductor, and passives in an enhanced HotRod QFN package. The module has pins for VIN and VOUT that are […]
High Current MOSFET Based Power Switch with Gate Driver
https://www.electronics-lab.com/high-current-mosfet-based-power-switch-with-gate-driver/
This power load switch project provides a simple and inexpensive method for power control. It is intended for driving a resistive or inductive load. A TTL logic signal from the system turns the load switch ON and OFF. The project consists of a low ohm N-Channel Power Trench MOSFET FDB0300N1007L and Gate driver MAX5048 chip. […]