The new TiePie engineering Handyscope HS6 is 4 channel 1 GSa/s low noise USB 3.0 oscilloscope


https://www.electronics-lab.com/the-new-tiepie-engineering-handyscope-hs6-is-4-channel-1-gsa-s-low-noise-usb-3-0-oscilloscope/

The 4 channel 1 GSa/s low noise USB 3.0 oscilloscope packed with technology TiePie engineering has introduced the Handyscope HS6, a USB 3.0 oscilloscope packed with technology. This new four channel high resolution low noise oscilloscope is available in models with 200 MSa/s up to 1 GSa/s sampling rate, with several features that are unique […]

PicoScope 2-Channel 5 and 16GHz Sampler-Extended Real-Time Oscilloscopes


https://www.electronics-lab.com/picoscope-2-channel-5-and-16ghz-sampler-extended-real-time-oscilloscopes/

The PicoScope 9402-5 and -16 bring very high-speed performance at less than half the cost of other traditional benchtop solutions with two high-resolution 12-bit channels driven by up to 2.5TSa/s (0.4ps) equivalent-time sampling Saelig Company, Inc. has introduced the PicoScope 2-channel 9402 Sampler-Extended Real-time Oscilloscope (SXRTO) series with two models available: the 9402-05 and the […]

Little Bee, affordable high-performance current & magnetic field probe


https://www.electronics-lab.com/little-bee-affordable-high-performance-current-magnetic-field-probe/

A campaign for a current probe called Little Bee was launched on Crowdsupply. Little Bee is an affordable and high-performance current probe and magnetic field probe that enables you to debug and analyze electronic devices more effectively. This device comes in handy because current probes available today are expensive, therefore having a limited number of […]

Power Analysis: Probing WS2812 RGB LEDs


https://www.electronics-lab.com/power-analysis-probing-ws2812-rgb-leds/

Power analysis is a technique to probe the inner workings of an integrated circuit by measuring changes in the supply current. Tim writes: Whenever a logic gate switches, it will cause a tiny current spike that can be measured externally. By inspecting the temporal variation, especially in reaction to an external signal, it is often […]

Siglent SDS1104X-U 100MHz Four channel oscilloscope sells for €359.00


https://www.electronics-lab.com/siglent-sds1104x-u-100mhz-four-channel-oscilloscope-sells-for-e359-00/

SIGLENT’s new SDS1104X-U 4 channel 100MHz bandwidth Super Phosphor Oscilloscope has a maximum sample rate of 1 GSa/s and a standard record length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. Serial bus decoding for IIC, SPI, UART, CAN, and LIN bus types are included The […]

T3DSO2000A Series Advanced 500MHz Oscilloscopes


https://www.electronics-lab.com/t3dso2000a-series-advanced-500mhz-oscilloscopes/

The Teledyne LeCroy T3DSO200 100-500MHz scopes provide a minimum vertical input range of 1mV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 500,000wfms/sec (sequence mode).      Saelig Co. Inc. has introduced the Teledyne Test Tools T3DSO2000A Oscilloscopes which are available in two channel and four channel […]

Tektronix Delivers Industry’s First 10 GHz Oscilloscope with 4, 6 or 8 Channels


https://www.electronics-lab.com/tektronix-delivers-industrys-first-10-ghz-oscilloscope-with-4-6-or-8-channels/

Tektronix, Inc. announced the availability of the new 6 Series B Mixed Signal Oscilloscope (MSO) which extends the performance threshold of the Tektronix Mainstream Oscilloscopes Portfolio to 10 GHz and 50 GS/sec. Developed to meet the demand for high-speed data movement and processing in embedded designs, the enhanced 6 Series B MSO offers leading signal […]

Free Elektor Article: Differential Current Probe


https://www.electronics-lab.com/free-elektor-article-differential-current-probe/

Differential current probe with single-ended output, +/-18 V supply voltage, 6 MHz bandwidth, and gain of 2, set by a single resistor, can be increased. Designed by A. Rosenkränzer This current probe has a differential input and single ended output. Instrumentation amplifier AD8421 is used for its high bandwidth. The amplifier is configured for a […]

Next generation Mixed Signal Oscilloscope targets electric vehicle designs


https://www.electronics-lab.com/next-generation-mixed-signal-oscilloscope-targets-electric-vehicle-designs/

Yokogawa’s DLM5000 features eight analog inputs and the ability to link two units to boost measurement flexibility Yokogawa has launched its next generation of a mixed-signal oscilloscope with options for four or eight analog inputs. The DLM5000 oscilloscope is the successor to the previous 8-channel DLM4000 model. With redesigned hardware, the DLM5000 offers major improvements […]

Newark Introduces New TBS1000C Digital Storage Oscilloscope from Tektronix


https://www.electronics-lab.com/newark-introduces-new-tbs1000c-digital-storage-oscilloscope-from-tektronix/

Newark added the new Tektronix TBS1000C Digital Storage Oscilloscope to its test and measurement portfolio. Designed to meet the needs of today’s educational institutions, embedded design engineers, and makers, this new oscilloscope offers an upgrade in performance over the TBS1000B. The TBS1000C is ideal for use in the education environment. It comes with a courseware […]