SECO Launches Pi Vision 10.1 CM5 Industrial HMI Panel Powered by Raspberry Pi CM5
https://www.electronics-lab.com/seco-launches-pi-vision-10-1-cm5-industrial-hmi-panel-powered-by-raspberry-pi-cm5/
A 10.1-inch touchscreen panel built around Raspberry Pi Compute Module 5, designed for industrial control, IoT dashboards, and embedded HMI applications.
SECO Unveils MediaTek Genio 360/360P-Based Cost-Efficient Edge AI SOMs
https://www.electronics-lab.com/seco-unveils-mediatek-genio-360-360p-based-cost-efficient-edge-ai-soms/
The SOM-Trizeps-X-Genio360/360P Edge AI SOMs are built on MediaTek's 6 nm Genio 360/360P IoT processors, offering cost-effective industrial-grade operation in a compact 67.6 × 36.7 mm SODIMM module.
SECO Rolls Out COM Express Type 6 Module for Mission-Critical Designs
https://www.electronics-lab.com/seco-rolls-out-com-express-type-6-module-for-mission-critical-designs/
The new COM is powered by Intel Core Ultra Series 3 processors, delivers up to 180 platform TOPS AI acceleration, and features industrial-grade specifications for next-generation embedded applications.
Seco Pi Vision 10.1 CM5 comes with a 10.1-inch industrial display system
https://www.electronics-lab.com/seco-pi-vision-10-1-cm5-comes-with-a-10-1-inch-industrial-display-system/
Seco has released an industrial human-machine interface solution, the Seco Pi Vision 10.1 CM5, which was showcased at the embedded world 2025 in Nuremberg, Germany. The hardware features a 10.1-inch industrial display system, powered by the Raspberry Pi Compute Module 5, primarily designed for industrial IoT, automation, and edge computing applications. As mentioned earlier, the […]
SECO SOM-SMARC-Genio510 and Genio700 Modules with MediaTek Genio 510 and 700 SoCs for Edge AI Applications
https://www.electronics-lab.com/seco-som-smarc-genio510-and-genio700-modules-with-mediatek-genio-510-and-700-socs-for-edge-ai-applications/
SECO has unveiled two new SMARC system-on-modules: the SOM-SMARC-Genio510 and SOM-SMARC-Genio700, powered by MediaTek Genio 510 and 700 SoCs featuring Cortex-A78 and Cortex-A55 cores. These industrial-grade modules are designed for high power efficiency, delivering reduced energy consumption even during intensive edge AI workloads. They are well-suited for applications such as retail touchscreens, intelligent industrial sensors, […]
UDOO X86 II SBC Combines Intel Braswell SoC with Microchip ATMega32U4 “Arduino” MCU
https://www.electronics-lab.com/udoo-x86-ii-sbc-combines-intel-braswell-soc-microchip-atmega32u4-arduino-mcu/
SECO, the company behind the brilliant UDOO X86, recently announced the release of another version of the board which is being called the UDOO X86 II SBC. While the UDOO x86 development board which was introduced in a crowdfunding campaign has grown in leaps and bounds with several accessories developed for it, It is falling […]
Seco “SBC-C43” Module Features Cortex-A72 enabled i.MX8.
https://www.electronics-lab.com/seco-sbc-c43-module-features-cortex-a72-enabled-mx8/
Seco is developing a 3.5-inch “SBC-C43”, which runs Linux or Android on an up to hexa-core i.MX8, offering up to 8GB soldered DDR4 and 32GB eMMC plus WiFi/BT, 2x GbE, 3x USB, HDMI 2.0 in and out, 2x M.2, and -40 to 85°C support. Seco’s 3.5-inch SBC enables soldered memory and optional industrial temperature support. […]
Seco’s New i.MX8M And i.MX8Quad Based Modules Run Linux
https://www.electronics-lab.com/secos-new-i-mx8m-and-i-mx8quad-based-modules-run-linux/
Seco Embedded Creators have launched the i.MX8M based Q7-C25 and i.MX8Quad based Q7-C26. Both can run Linux and Android, and are available in 0 to 60°C and -40 to 85°C models. The 5V modules have many similar features, but the Q7-C26 based on the more powerful, up to hexacore i.MX8Quad adds some extras such as SATA III support. The Q7-C25 utilizes NXP’s dual- […]