Tag: Sipeed

Sipeed released two embedded devices based on Bouffalo Lab's RISC-V BL616 microcontroller. The M0S module has interfaces for WiFi 6, Bluetooth 5.2, and Zigbee. It also works with DVP cameras, RGB LCDs, and Ethernet RMII. On the product page, it says that the BL616(RV32GCP) has a...

The Sipeed announced the MetaSense RGBD ToF family of 3D Cameras for microcontrollers and ROS-operated Robots, which is currently in development. The MetaSense 3D cameras use the Time-of-Flight (ToF) principle for providing 3-dimensional information. ToF utilizes light and measures the...

Sipeed has surprisingly introduced yet another Tang Nano FPGA board based on the Gowin GW1NR-9 chip. This time, the manufacturer has pushed the limits to around 9K (8640) logic units (LUT4), unlike the predecessor Tang Nano 1K and Tang Nano 4K with around 1152 and 4608 LUTs respectively....

Single-board computers (SBC) have seen widespread application in the hardware ecosystem owing to the growing demand for mobile, portable, and embedded systems with reduced system's overall cost and connectors problems. Amongst the variety of SBC architectures available in the market,...

Maker culture and its DIY subculture have seen continued strides, creating a need for low-cost open-source devices with edge technology and instruction set architecture, with compatibility with high-end OS like Linux. Sipeed has released a new system-on-module board to meet these...

There had been a spoiler by Sipeed a few weeks back about the testing of yet another Tang Nano board. Yes, you are right, this is not the first Tang Nano board by Sipeed, but the first version came two years ago as a $5 development board built around Gowin GW1N-1 LittleBee FPGA....

MAIX-II Dock Development Kit for Sipeed's second-generation MAIX-II core module has a built-in NPU (Neural Processing Unit) for AI-specific applications. The module runs in a complete Linux environment with edge computing features to improve response time and reduce the bandwidth. Hence,...

    Chinese vendor Sipeed has announced a $72, open spec “Sipeed Tang Hex” SBC which supports Linux on a Xilinx Zynq-7020. This is coming after they recently launched a Sipeed MaxiCube dev based on a Kenryte K210 RISC-V chip, and a FPGA board called Sipeed Tang based on...