X-Sense STH51/STH54 Thermo Hygrometer Review – Accurate Climate Monitoring with Swiss Sensor and WiFi Connectivity
https://www.electronics-lab.com/x-sense-sth51-sth54-thermo-hygrometer-review-accurate-climate-monitoring-with-swiss-sensor-and-wifi-connectivity/
The X-Sense STH51/STH54 Thermo Hygrometer is a WiFi-enabled device for precise and convenient indoor climate monitoring. Featuring high-precision Swiss-made sensors, it delivers temperature accuracy of ±0.36°F (±0.2°C) and humidity accuracy of ±2% RH. The device also has Wi-Fi with an open-air transmission range of 1700ft or 500m, so you can connect it to your home […]
Low-Cost Room Thermometer Using 16×2 LCD and Atmega328
https://www.electronics-lab.com/low-cost-room-thermometer-using-16x2-lcd-and-atmega328/
This is an easy to build small size and low-cost room thermometer. The project consists of LM35 analog temperature sensor, 16×2 LCD, and an Atmega328 chip. This compact board is Arduino compatible and provided with an onboard connector for Boot-Loader burning and Arduino IDE programming. Board also has 2 additional connectors for analog input and […]
Simplified Contactless Thermometer reference design
https://www.electronics-lab.com/simplified-contactless-thermometer-reference-design/
Renesas’ reference design considers the thermometer’s range of operation, accuracy, power considerations, and display options. Renesas’ winning combination IR contactless thermometers are needed for medical applications to monitor an individual’s body temperature before entering any public place. Depending on the target market and application, the thermal range to be monitored, as well as the required […]
Free Elektor Article: Nixie Bargraph Thermometer
https://www.electronics-lab.com/free-elektor-article-nixie-bargraph-thermometer/
Nixie tubes are always fascinating. Nowadays they are mostly used for clock displays, such as the project in the May/June 2016 issue of Elektor. The ‘Nixie’ bargraph tubes for analogue readout in the form of a column of light are less well known. Strictly speaking, they are not Nixie tubes because they do not display […]
Arduino OLED Hygrometer and Thermometer using DHT11
https://www.electronics-lab.com/arduino-oled-hygrometer-thermometer-using-dht11/
Hygrometers are used to determine the moisture content of the environment. They find application in farms, food storage, museums, and other places where moisture needs to be monitored to ensure damage is not done to goods and other things stored in that space. For today’s tutorial, we are going to build a Hygrometer using the […]
NixieTherm RGB – Nixie Tube Thermometer
https://www.electronics-lab.com/nixietherm-rgb-nixie-tube-thermometer/
NixieTherm RGB, an IN-13 tube indoor thermometer (DIY kit or assembled) with build-in true RGB controller; powered by 5V USB A Russian Bargraph-Nixie-tube shows similar like in the good old time a mercury thermometer the room-temperature with a variable glow hight lenght; however with NixieTherm RGB you have a wonderful red-orange glow. At the same […]
Two-Digit Thermometer using ATtiny84 and a DS12B20
https://www.electronics-lab.com/two-digit-thermometer-using-attiny84-ds12b20/
David Johnson-Davies shared another nice tiny project. This time is a two digit thermometer based on ATtiny84 and DS12B20 1-Wire temperature sensor. It uses a DS12B20 1-Wire temperature sensor, and an ATtiny84 to drive the display and read the sensor. It’s just over 25mm square; about the size of a British 50 pence piece. The […]
Tohoku University Reveals Swallowable Thermometer at SemiCon Japan
https://www.electronics-lab.com/tohoku-university-reveals-swallowable-thermometer-semicon-japan/
A lot of people know that temperature is the degree of heat present in a substance. The common way of measuring body temperature is the armpit method where temperature is measured by putting the thermometer under the armpit. However, there are better ways of measuring this temperature. Right now, the most accurate temperature measure is […]
ESP32 E-Paper Thermometer with a DS18B20 Sensor
https://www.electronics-lab.com/esp32-e-paper-thermometer-ds18b20-sensor/
Our friends on educ8s.tv published a new video. Check it out. In this ESP32 project video, we are going to use an E-Paper display and a DS18B20 temperature sensor to build a low-power thermometer. We are going to use the Arduino IDE to program to ESP32 board. ! It is a very easy project […]
DS18B20 Sensor Based Thermometer with Nokia 5110 LCD display
https://www.electronics-lab.com/ds18b20-sensor-based-thermometer-nokia-5110-lcd-display/
Hi guys welcome to this tutorial. Today we will be building a simple temperature monitor using the DS18B20 sensor with a Nokia 5110 LCD Display and an Arduino mega. The DS18B20 digital temperature sensor gives a 9-bit to 12-bit Celsius temperature readings and also has an alarm function with nonvolatile user-programmable upper and lower trigger […]