Make Your Own Arduino Nano In The Simplest Way (DIY – Arduino Nano)


https://www.electronics-lab.com/make-your-own-arduino-nano-diy-arduino-nano/

In today’s post, we are going to learn how to make an Arduino nano at home. Electronics enthusiast Pratik Makwana designed this project in instructables.com. Every step in this project is well-explained. If you already don’t know what Arduino Nano is then here is a brief introduction: Arduino Nano is a tiny yet strong member of […]

Explanation of the Components on a Raspberry Pi


https://www.electronics-lab.com/explanation-components-raspberry-pi/

In this video, Circuit Basics unbox a new Raspberry Pi B+ and show you the main components on the board. It’s a good primer to watch before you connect it to a monitor, keyboard, or router for the first time. Explanation of the Components on a Raspberry Pi – [Link]

PingPong IoT Development Board – Connecting Hardware to the Cloud


https://www.electronics-lab.com/pingpong-iot-development-board/

Germany-based Round Solutions developed the PingPong, a powerful and flexible hardware platform for IoT and machine-to-machine (M2M) applications. The PingPong can be used for both wired and wireless connections. The modular hardware design can integrate custom-specific applications and communication standards into a single solution platform that has a very small form factor. The basic hardware platform of […]

Build Your Next IoT Device With GOBLIN 2


https://www.electronics-lab.com/build-next-iot-device-goblin-2/

Designed for industry, makers, and visionary students, Verse Technology presents GOBLIN 2, its new card with the best of Arduino technology. GOBLIN 2 is an IoT development board that unlocks the potential of the Internet of Things. It has been built based on the high-performance 16MHz ATmega328P microcontroller with a built-in SIM5320A connectivity module, and […]

How to Write and Run a C Program on the Raspberry Pi


https://www.electronics-lab.com/write-run-c-program-raspberry-pi/

In this tutorial, circuitbasics.com discuss what a C program is, what C programming is used for, and finally, how to write and run a C program on the Raspberry Pi. The C programming language is one of the most widely used programming languages of all time. It is computationally faster and more powerful than Python. C […]

Weather Station with a BME280 sensor and an LCD screen with Arduino Mega


https://www.electronics-lab.com/weather-station-bme280-sensor-lcd-screen-arduino-mega/

In this Arduino Project video educ8s.tv is going to build a simple weather station using a BME280 sensor and an LCD shield. Hello guys, I am Nick and welcome to educ8s.tv a channel that is all about DIY electronics projects with Arduino, Raspberry Pi, ESP8266 and other popular boards. Today we are going to take […]

DS28EC20, A Serial 1-Wire 20Kb EEPROM


https://www.electronics-lab.com/ds28ec20-serial-1-wire-20kb-eeprom/

The American manufacturer of analog and mixed-signal integrated circuits, Maxim Integrated, has developed a new serial EEPROM memory that operates from single-contact 1-wire interface. The DS28EC20 is a 20480-bit, 1-Wire® EEPROM organized as 80 memory pages of 256 bits each. An additional page is set aside for control functions. Data is written to a 32-byte […]

How to Read Your First Autodesk EAGLE Schematic


https://www.electronics-lab.com/read-first-autodesk-eagle-schematic/

Back to basics. Here is a tutorial on autodesk.com blog on how to read schematics: The schematic forms the building block of every electrical circuit, and even if you aren’t designing one yourself, knowing how to read one is invaluable. And with some schematic reading knowledge in hand, you’ll be able to design, build and […]

How to Set Up and Program an LCD Display on an Arduino


https://www.electronics-lab.com/set-program-lcd-display-arduino-2/

circuitbasics.com has a tutorial on how to setup an LCD with Arduino. In this tutorial, I’ll explain how to set up an LCD display on an Arduino, and show you all the functions available to program it (with examples). The display I’m using here is a 16×2 LCD display that I bought for under $10 on Amazon. LCDs are really useful […]

HPS140MK2, The New Handheld Oscilloscope


https://www.electronics-lab.com/hps140mk2-new-handheld-oscilloscope/

Velleman Inc., a producer and a distributor of electronics, has produced a new handheld oscilloscope with the same power of its HPS140, but with smaller size and modern design. HPS140MK2 is a 11.4 x 6.8 x 2.2 cm versatile component tester that fits in your pocket. This small oscilloscope features a real time 40 MS/s […]