Keysight Keysight UXR 110GHz BW, 256GS/s, 10-bit, 4-Channel Real-Time Oscilloscope Teardown & Experiments
https://www.electronics-lab.com/keysight-keysight-uxr-110ghz-bw-256gs-s-10-bit-4-channel-real-time-oscilloscope-teardown-experiments/
In this episode Shahriar takes a look at one of the most advanced electrical test and measurement instruments ever created. The Keysight UXR-Series Real-Time Oscilloscope brings 110GHz of analog bandwidth and 256GS/s real-time sampling at 4-channels simultaneously. To make it even more impressive, the entire data-conversion architecture is in 10-bits. This implies that the instruments […]
ArdOsc – Arduino Oscilloscope in a Matchbox
https://www.electronics-lab.com/ardosc-arduino-oscilloscope-in-a-matchbox/
Peter Balch @ instructables.com build an Arduino based tiny oscilloscope and a detailed explanation is given on the tutorial. He writes: Why would I want a tiny oscillscope? I’ve got a room full of electronic Stuff including four oscillscopes. But it’s a fuss using them. It would be nice to have something that fits in […]
Sensything Provides Sensors, Processing, and Wireless on a Single Board
https://www.electronics-lab.com/sensything-provides-sensors-processing-and-wireless-on-a-single-board/
Multi-sensor data acquisition, processing, and Wi-Fi/Bluetooth communication in a single, open source board. Sense anything. Sensything is an open source, high-resolution (24-bit), Wi-Fi and Bluetooth-enabled sensor interface platform that supports multiple sensor readings. In most cases, it offers a single-board, single-platform solution for acquiring and logging multiple sensor readings that can be seen/sent through an […]
DIY NAS / Router in 3-bay hot swap enclosure
https://www.electronics-lab.com/diy-nas-router-in-3-bay-hot-swap-enclosure/
A 2-bay, low power, ARM-based NAS and router. The project repository is here. The enclosure is an Athena Power BP-SAC2131B 3.5” HDD Hot-Swap Backplane Module. This is a a 3-bay hot swap backplane intended to go into two 5.25” bays of a server. This is not a trayless backplane, the hard disks must be mounted […]
Easy Motion and Gesture Detection by PIR Sensor & Arduino
https://www.electronics-lab.com/easy-motion-and-gesture-detection-by-pir-sensor-arduino/
Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment. By ElectroPeak @ hackster.io: In this article, we’ll show you how to make a gesture detector by simple components like PIR sensor and Arduino Nano. At the end of this article you […]
Rock960 SBC- A viable Competitor to Raspberry PI
https://www.electronics-lab.com/rock960-sbc-a-viable-competitor-to-raspberry-pi/
The Rock960 SBC – developed by Guangzhou based startup called Varms – is built on the hexa-core Rockchip RK3399 and it really stands out from other SBC contenders like the NanoPI M4 despite being a little pricy. The Rock960 is the only “96boards’s SBC” in the market that is built on the popular Rockchip hexa-core […]
WarpPi is a Hackable Raspberry Pi Algebra Calculator
https://www.electronics-lab.com/warppi-is-a-hackable-raspberry-pi-algebra-calculator/
Have you ever been given an algebra homework where there were a problem and its answer, but you couldn’t figure out how they went to the solution? Well, you’re in luck! With Andrea Cavalli’s WarpPi calculator and its CAS (Computer Algebra System), you can go ahead and build your own algebraic calculator and even modify […]
Imec Invented Unique Cost-effective Cooling For High-Performance Chips
https://www.electronics-lab.com/imec-invented-unique-cost-effective-cooling-for-high-performance-chips/
Imec, the distinguished Belgian research center has invented a new and cost-effective method of cooling chips. This achievement can be an important innovation to tackle the ever-increasing cooling demands of high-performance 3D chips and systems. Present powerful electronic systems have high cooling demands for integrated semiconductor chips. Conventional solutions operate with various passive (or occasionally active) […]
CCPROG PAT – USB-C Power Adapter Programmer and Tester
https://www.electronics-lab.com/ccprog-pat-usb-c-power-adapter-programmer-and-tester/
The PAT is designed for Validation, Test, and Debug of USB Type-C (Power Delivery capable) power adapters. Simple and user friendly Graphical User Interface (GUI) packaged with this tool enables an easy demonstration of the power adapter capabilities (PDOs). The project is coming soon on CrowdSupply. Key Features Voltmeter Display Listing of PDOs supported by […]
EaglePanelizer – EAGLE CAD artwork panelizer
https://www.electronics-lab.com/eaglepanelizer-eagle-cad-artwork-panelizer/
This is simple tool for panelize EAGLE CAD artwork. Motivates from this tweets “Specify X, Y on the EAGLE just make faces with Gerber in 1 shot.” EaglePanelizer – EAGLE CAD artwork panelizer – [Link]