Phytec Develops Three PhyCore Modules – i.MX8, i.MX8M, and iMX8X, Driven By Linux
https://www.electronics-lab.com/phytec-develops-three-phycore-modules-i-mx8-i-mx8m-and-imx8x-driven-by-linux/
Phytec has updated their product pages for three new PhyCore modules, all of which support Linux. The three modules, which employ three different flavors of i.MX8 SOC is phyCORE-i.MX 8X, i.MX 8M, and i.MX 8 SBCs. The PhyCore COMs are based on NXP’s Cortex-A53 based i.MX8M, its -A53 and -A72 equipped i.MX8 Quad, and its -A35 based i.MX8X. phyCore-i.MX 8X The i.MX8X SoC found […]
PICO316 – The New Pico-ITX SBC Powered By Intel Apollo Lake Processors
https://www.electronics-lab.com/73113-2/
Axiomtek, a Taiwan based company has introduced new Pico-ITX form factor SBCs using Intel’s Apollo Lake processor. This line of SBCs from Axiomtek started with PICO312 with minimal coastline ports, and then followed with a COM-like PICO313. Recently they launched a similar 100 x 72mm PICO316 SBC with more versatile ports than the original PICO312. This PICO316 SBC […]
1W regulated SMT DC/DC converter can be used in alternative energy
https://www.electronics-lab.com/1w-regulated-smt-dc-dc-converter-can-used-alternative-energy/
Expanding its range of embedded-core DC/DC converters, Murata Power Solutions adds the NXF1 series of regulated, high isolation converter with 3.3 or 5.0V outputs. Inputs available are nominal 3.3 and 5.0V in an industry-standard, surface-mount package with a low profile of 5.1mm. Line regulation is typically better than 0.03 per cent and load regulation is […]
4 Channel Relay Shield for Arduino UNO
https://www.electronics-lab.com/4-channel-relay-shield-arduino-uno/
4 Channel Relay Shield for Arduino UNO is a simple and convenient way to interface 4 relays for switching applications in your project. Very compact design that can fit on top of Arduino UNO. Project requires 12V DC supply, all 4 trigger inputs require TTL signal, Relay-1 to Relay-4 inputs connected to D8 To D11 […]
Arduino Real Time Clock with Temperature Monitor
https://www.electronics-lab.com/arduino-real-time-clock-temperature-monitor/
Hi guys, in one of our previous tutorials, we built a real-time clock with temperature monitor using the DS3231 and the 16×2 LCD display shield. Today, we will build an upgrade to that project by replacing the 16×2 LCD display with an ST7735 based 1.8″ colored TFT display. Apart from changing the display, we will […]
Artila M-X6ULL is a Linux-ready Cortex-A7 SoM with a Real Time patch
https://www.electronics-lab.com/artila-m-x6ull-linux-ready-cortex-a7-som-real-time-patch/
Artila Electronics, a professional in development and manufacture of ARM-based embedded Linux systems, has released a SODIMM module M-X6ULL based on NXP i.MX6ULL processor family. The new M-X6ULL is designed to meet the needs of many general embedded applications that require power efficient, high performance and cost optimized solution, as well as embedded systems that require high-end multimedia applications […]
The Orange Pi 4G IoT Board is the Most Advanced Orange Pi Board
https://www.electronics-lab.com/orange-pi-4g-iot-board-advanced-orange-pi-board/
Orange Pi has been known for its several Raspberry Pi board clones and now has launched a better IoT focused board – Orange Pi 4G IoT. The Shenzhen based company, Xulong has gone through different modifications and even as at last year released a low-cost 2G based board – The Orange Pi 2G IoT board that […]
Tiny Graphics Library for ATtiny85 and SH1106 OLED Display
https://www.electronics-lab.com/tiny-graphics-library-attiny85-sh1106-oled-display/
David Johnson-Davies published another great tutorial on how to use the Tiny Graphics Library to plot the outside temperature over 24 hours on a 128×64 OLED display using an ATtiny85. This small graphics library provides point, line, and character plotting commands for use with an I2C 128×64 OLED display on an ATtiny85. It supports processors […]
Analog Devices Circuits from the Lab Reference Designs Instrumentation Anthology (pdf)
https://www.electronics-lab.com/analog-devices-circuits-lab-reference-designs-instrumentation-anthology-pdf/
Analog Devices Circuits from the Lab Reference Designs Instrumentation Anthology (pdf) – [Link]
Arduino Yùn Rev.2 is here!
https://www.electronics-lab.com/arduino-yun-rev-2/
Arduino just announced a new Yun v2 Board with improvements over the older brother. From the Arduino blog: What’s New in Rev.2 Hardware: Much better, more robust power supply New Ethernet connector with a clever mounting solution that enables the use of all possible shields with no risk for accidental short circuits Horizontal USB connector […]