40V OptiMOS MOSFET family is optimized for synchronous rectification
https://www.electronics-lab.com/40v-optimos-mosfet-family-optimized-synchronous-rectification/
Based on Infineon’s thin wafer technology, a family of 40V MOSFETs are claimed to enable “significant performance benefits” and will cover a wide voltage range. The OptiMOS 6 family has been optimized for synchronous rectification in switch mode power supplies (SMPS) for servers, desktop PCs, wireless chargers, quick chargers and ORing circuits. They deliver a […]
RK3399 SoC Based ROCK960 Model C Features 4-Lanes PCI-E 2.1
https://www.electronics-lab.com/rk3399-soc-based-rock960-model-c-features-4-lanes-pci-e-2-1/
VAMRS Limited launched Rock96 Model C, which retains being part of their 96Boards ecosystem. ROCK960 is the first 96boards based on Rockchip processor. Featuring RK3399 with Dual A72 plus Quad A53 cores and Mali T860MP4 makes it one of the most powerful 96boards. Here is a brief explanation of 96board ecosystem: 96boards is a range […]
SCD30 – CO2 & Temperature & Humidity Sensor
https://www.electronics-lab.com/scd30-co2-temperature-humidity-sensor/
The Grove – CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30. The measuring range of this sensor is 0 ppm-40’000 ppm, and the measurement accuracy can reach to ±(30 ppm + 3%) between 400ppm to 10’000ppm. In addition to the Non-Dispersive Infrared (NDIR) […]
Rock960 Model C board – A Cheaper Version of its Predecessor at only $69
https://www.electronics-lab.com/rock960-model-c-board-cheaper-version-predecessor-69/
VAMRS has designed a new version of their board with the launch of the Rock960 model C, that is much cheaper than the early Rockchip RK3399 Rock960 board and still compliant to 96Board’s specifications without losing out in performance. In comparison with last year prices, 96Boards compliant Rock960 board was sold for $99 and up. […]
Redd – Remote Embedded Development Device
https://www.electronics-lab.com/redd-remote-embedded-development-device/
Redd is a remote development device targeted at embedded projects. Using Redd, you can easily program devices remotely, as if they were sitting right in front of you. Simply connect using OpenVPN tunnel, and start developing. Redd is equipped with the most common interfaces for embedded device programming: USB 2.0 x2 Low Current Relay x6 […]
NiteFury – An Artix-7 FPGA for developing PCIe
https://www.electronics-lab.com/nitefury-artix-7-fpga-developing-pcie/
An Artix-7 FPGA with its own DDR3 RAM right in your laptop – for developing PCIe, etc. NiteFury is an Artix-7 FPGA development board in an M.2 form-factor that includes on-board DDR3 RAM. This combination lets you work with PCI Express at incredible rates from inside your laptop or desktop. You can also use NiteFury […]
JLCPCB.com – Eagle Gerber Export and Quick PCB Review
https://www.electronics-lab.com/jlcpcb-com-eagle-gerber-export-and-pcb-quick-review/
We recently placed an order on JLCPCB.com for 5 pieces of a PCB design we have done here at electronics-lab.com. The project we were dealing is a 60V to 5V @ 3.5A buck converter based on TPS54360B and we are going to publish it soon under Projects -> Power. The PCB design has 2 layers […]
NodeMCU ESP8266 WebServer Tutorial
https://www.electronics-lab.com/nodemcu-esp8266-webserver-tutorial/
From the Wemos D1 mini to the NodeMCU, the ESP8266 based boards are by far the most popular platform, among makers and hobbyist, for building WiFi based projects due to their low cost and general ease of use. For today’s tutorial, we will continue our exploration of the most popular of the ESP8266 based boards; […]
Coilcraft to Introduce a New Generation of Molded Power Inductors
https://www.electronics-lab.com/coilcraft-introduce-new-generation-molded-power-inductors/
Coilcraft will introduce its new XGL4020 Series of high-performance, molded power inductors at the upcoming Applied Power Electronics Conference (APEC), March 17-21 in Anaheim, CA. The XGL4020 features the industry’s lowest DC losses and extremely low AC losses for a wide range of DC-DC converters (from hundreds kHz up to 5+ MHz). Additional performance improvements include […]
New Raspberry Pi Compute Module 3+ Improves Thermal Control
https://www.electronics-lab.com/new-raspberry-pi-compute-module-3-improves-thermal-control/
Like previously marketed boards of Raspberry, this new module is not meant for the traditional use. Rather, business and industrial use were intended with the New Raspberry Pi Compute Module 3+. Keeping the same compatibility, Raspberry new boards are the modern version of computing modules. For sure, development in the old system is always needed, […]