Amlogic T972 Player board features multiple HDMI inputs – support 4K V-by-One displays and Android 9.0
https://www.electronics-lab.com/amlogic-t972-player-board-features-multiple-hdmi-inputs-support-4k-v-by-one-displays-and-android-9-0/
Shenzhen Tomao, one of the leading OEM/ODM manufacturers with over 9 years of experience, has designed an Amlogic T972 multimedia network single-board computer with multiple HDMI inputs and a V-By-One display interface with support for up to 4K resolutions. Targeted at digital signage applications, the Amlogic T972 SBC is powered by an advanced quad-core Cortex-A55 […]
Pre-Amplifier for MEMS Microphone
https://www.electronics-lab.com/project/pre-amplifier-for-mems-microphone/
This is a low-cost, small-size audio pre-amplifier for MEMS microphone, OPAMP-based circuit amplifies the low-level analog signal coming from MEMS microphone to the desired level required for the next stage which is an audio amplifier, basically microphone level to line level. Resistor R4 and R7 are used to generate a voltage reference to bias the […]
Bluetooth Low Energy (BLE) Tutorial for Beaglebone using python
https://www.electronics-lab.com/bluetooth-low-energy-ble-tutorial-for-beaglebone-using-python/
1. Introduction This is a simple example showcasing how to control a BleuIO dongle connected to Beaglebone Black using a python script. When running the script, it will first ask for the com port where the dongle is connected (usually ‘/dev/ttyACM0’). After that, BleuIO will start advertising. Every 8th second it will turn on one […]
27” Front IP65 Open Frame Touch Panel PC from IBASE
https://www.electronics-lab.com/27-front-ip65-open-frame-touch-panel-pc-from-ibase/
IBASE Technology Inc., a leading manufacturer of embedded boards and industrial computers is proud to release its new OFP-W2700, a series of 27-inch open frame panel PCs suitable for both indoor and semi-outdoor environments. It has IP65 front panel protection, splash-resistant front bezel and can be easily integrated into a custom enclosure, supporting both portrait […]
EPC2067 40 V, 409 A(pulsed) eGaN FET
https://www.electronics-lab.com/epc2067-40-v-409-apulsed-egan-fet/
EPC’s EPC2067 is a 40 V eGaN FET for state-of-the-art power density The EPC2067 from EPC is a 40 V, 1.3 mΩ (typical) eGaN FET with a pulsed current rating of 409 A in a tiny 9.3 mm2 footprint. This device is ideal for applications with demanding high power density performance requirements, including 48 V to […]
Arduino UNO Mini Limited Edition available on Mouser
https://www.electronics-lab.com/arduino-uno-mini-limited-edition-available-on-mouser/
Arduino UNO Mini Limited Edition is a special collectible version of the Arduino UNO, designed to celebrate the UNO’s 16th anniversary. The UNO Mini Limited Edition features a compact 26.7mm x 34.2mm form factor, with black and gold trim. This edition of the UNO will be limited to 10,000 units, each individually numbered. The Arduino UNO Mini […]
Qorvo QPC1006 Single-Pole, Triple–Throw (SP3T) RF GaN Switch
https://www.electronics-lab.com/qorvo-qpc1006-single-pole-triple-throw-sp3t-rf-switch/
Qorvo QPC1006 Single-Pole, Triple–Throw (SP3T) Switch is fabricated on Qorvo’s QGaN25 0.25um GaN on SiC production process. Operating from 0.15 to 2.8GHz, the QPC1006 typically supports 50W input power handling at control voltages of 0/−40V for CW and pulsed RF operations. This switch maintains a low insertion loss of less than 1.0dB and greater than […]
Open up new IoT possibilities with Seeed XIAO BLE for TinyML and Seeed Fusion PCBA service
https://www.electronics-lab.com/open-up-new-iot-possibilities-with-seeed-xiao-ble-for-tinyml-and-seeed-fusion-pcba-service/
Seeed Studio has just released the highly anticipated addition to the XIAO series, Seeed XIAO BLE – nRF52840, a powerful Bluetooth LE microcontroller supporting multiple protocols including Bluetooth 5.0, NFC and Zigbee. What’s so special about it? Seeed XIAO BLE and the advanced version, Seeed XIAO BLE Sense are designed for wearable devices and Internet of […]
ADLINK releases its first SMARC module based on Qualcomm QRB5165
https://www.electronics-lab.com/adlink-releases-its-first-smarc-module-based-on-qualcomm-qrb5165/
ADLINK releases its first SMARC module based on Qualcomm QRB5165 enabling high-performance robots and drones at low power Integrated IoT technologies provide on-device AI capabilities at the edge. ADLINK Technology Inc., a global leader in edge computing, released the LEC-RB5 SMARC module –its first SMARC AI-on-Module based on a Qualcomm Technologies, Inc. processor. The Qualcomm […]
Universal OPAMP Board for SMD MSOP8 Package
https://www.electronics-lab.com/project/universal-opamp-board-for-smd-msop8-package/
This is easy to build and very useful project for hobbyists and students to learn and create OPAMP-based projects. The project accommodates a single OPAMP in the MSOP8 package. The project provides the user with multiple choices and extensive flexibility for different applications circuits and configurations. It provides the user with many combinations for various […]