NodeMCU ESP32-C3 RISC-V based development boards, supports Wi-Fi and BLE
https://www.electronics-lab.com/nodemcu-esp32-c3-risc-v-based-development-boards-supports-wi-fi-and-ble/
We recently saw that Ai-Thinker released modules that are based on the ESP32 MCU and support Wi-Fi and BLE 5.0 wireless connectivity. Ai-Thinker has been at the forefront in designing modules on the famous ESP microcontrollers by manufacturing the first series of modules on the ESP8266. Recently, CNX-Software spotted few development boards, integrating the Ai-Thinker […]
Precision Thermocouple Amplifier (Thermocouple to Digital Converter with Linearization – SPI Interface)
https://www.electronics-lab.com/project/precision-thermocouple-amplifier-thermocouple-to-digital-converter-with-linearization-spi-interface/
This precision thermocouple sensor module performs cold-junction compensation and digitizes the signal from any type of thermocouple. The output data is formatted in degrees Celsius. The converter resolves temperatures to 0.0078125°C, allows readings as high as +1800°C and as low as -210°C (depending on thermocouple type), and exhibits thermocouple voltage measurement accuracy of ±0.15%. The […]
Introducing SnapEDA on Electronics-lab.com
https://www.electronics-lab.com/introducing-snapeda-on-electronics-lab-com/
Today we are announcing our collaboration with SnapEDA.com, the first and leading electronics design search engine of the web, that each year, over a million hardware designers around the world use it to design electronics faster, making everything from smartwatches, to drones, and robots. They provide ready-to-use building blocks for design, including symbols & PCB […]
NANO-6063, the Latest NANO-ITX Embedded Board Powered by Intel Atom® x6000E Series Processors
https://www.electronics-lab.com/nano-6063-the-latest-nano-itx-embedded-board-powered-by-intel-atom-x6000e-series-processors/
NANO-6063 is Designed with 2.5GbE featuring Intel TSN/TCC Real-time Capability and -40°C to 85°C Wide operating Temperature for Industrial Automation, Healthcare Systems and Outdoor Gateway Application. Intel Atom® x6000E Series SoC based NANO-ITX Board with Triple Display, GbE LAN, USB 3.2 Gen 2, M.2, SATA III, Mini-PCIe, and mSATA American Portwell Technology, Inc., a wholly-owned […]
Single-ended Video/Digital input to differential output driver (High Speed Differential Driver)
https://www.electronics-lab.com/project/single-ended-video-digital-input-to-differential-output-driver-high-speed-differential-driver/
The project described here is a low-cost solution to transmit a video or digital signal up to 300 Meters over a twisted pair cable. The project has been designed using the AD8131 chip which is a differential driver for the transmission of high-speed signals over low-cost twisted pair or coaxes cables. The project can be […]
600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)
https://www.electronics-lab.com/600v-30a-ipm-module-carrier-board-for-variable-frequency-drive-vfd/
This compact IPM module circuit provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. The circuit is based on FNA23060 chip which integrates the optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and […]
300W Off-line Power Factor Correction (PFC) Boost Converter
https://www.electronics-lab.com/300w-off-line-power-factor-correction-pfc-boost-converter/
The circuit presented here is a 300W off-line power factor correction (PFC) boost converter providing a nominal regulated output voltage of 375V @ 0.8A of load current. The project accommodates an input voltage range of 85V AC to 265VAC and uses average current mode control at a fixed programmable switching frequency of 116KHz. The project […]
3 Phase AC input – DC Output – High Voltage DC Power Supply (2KW)
https://www.electronics-lab.com/3-phase-ac-input-dc-output-high-voltage-dc-power-supply-2kw/
Although this power supply design is specific to the Intelligent Power Modules (IPM) VFD drives, high voltage boost converters, high voltage battery chargers, etc, the concept and circuit design may be used for any power supply that requires a high voltage output of up to 800V DC and 4 A. Since it is an unregulated […]
Clock Multiplier – Crystal Frequency Generator using PT7C4511
https://www.electronics-lab.com/clock-multiplier-crystal-frequency-generator-using-pt7c4511/
This is an easy-to-build project and it is the most cost-effective and high-performance frequency multiplier, which instigates analog phase lock loop techniques. The circuit provides high-quality, high-frequency output from lower frequency crystal or clock input. The project can be used as a crystal frequency oscillator, clock multiplier and frequency translation. Using phase-locked-loop (PLL) techniques, the […]
VD6283TX Hybrid Filter Multispectral Sensor
https://www.electronics-lab.com/vd6283tx-hybrid-filter-multispectral-sensor/
STMicroelectronics’ color sensor with advanced light flicker extraction is fast and accurate thanks to an individual ADC STMicroelectronics’ VD6283 (1.83 mm x 1.0 mm x 0.55 mm) is a color sensor with advanced light flicker extraction. Light measurement is fast and accurate thanks to an individual ADC and a readout for each color channel. The […]