Joystick Controlled 2 x RC Servo motors – Arduino Compatible
https://www.electronics-lab.com/joystick-controlled-2-x-rc-servo-motors-arduino-compatible/
This project enables easy control of 2 RC servo motors using a thumb joystick. This is an Arduino compatible project and it consists of a thumb joystick, ATMEGA328 microcontroller, filter capacitor on dc supply, and other components. The thumb joystick has 2 axes, X and Y. The joystick consists of 2 x 10K potentiometers. These […]
iWave Systems introduces Wi-Fi 6 (802.11 ax) enabled i.MX 8 System on Modules and Single Board Computers
https://www.electronics-lab.com/iwave-systems-introduces-wi-fi-6-802-11-ax-enabled-i-mx-8-system-on-modules-and-single-board-computers/
Targeting connected industrial, medical, and automotive applications, iWave adds to its strong portfolio: i.MX 8 System on Modules with Wi-Fi 6. With the continuous advancement of wireless technologies, Wi-Fi 6 (802.11 ax) brings performance improvement with increased spatial and spectral performance in high-density environments. Wi-Fi 6 is designed to improve speed, increase efficiency with increased […]
High Voltage DC Power Supply for Intelligent Power Modules
https://www.electronics-lab.com/project/high-voltage-dc-power-supply-for-intelligent-power-modules/
Although this power supply design is specific to the Intelligent Power Modules (IPM), the concepts and circuit design may be used for any power supply that requires high voltage output up to 400V DC and 6 A. It is an unregulated power supply, DC output is dependent on AC input. The circuitry includes a passive […]
Rock Pi 4 Plus SBC Features Rockchip OP1 Processor and eMMC Storage with Twister OS Armbian
https://www.electronics-lab.com/rock-pi-4-plus-sbc-features-rockchip-op1-processor-and-emmc-storage-with-twister-os-armbian/
Radxa launched the Rock Pi 4 Plus series of single-board computers with the Rockchip OP1 Processor, as an alternative to the Raspberry Pi. The new Rock Pi 4 Plus has been upgraded to a Rockchip OP1 processor, a powerful hexa-core ARM-based RK3399 SoC. Hence, it should be 11% faster than its predecessors. Additionally, the SBC […]
Meet the Photoacoustic Sensing Based SCD41 CO2 Sensor; The Latest Addition to Sparkfun’s QWiiC Ecosystem
https://www.electronics-lab.com/meet-the-photoacoustic-sensing-based-scd41-co2-sensor-the-latest-addition-to-sparkfuns-qwiic-ecosystem/
Sparkfun’s QWiiC ecosystem comprises of I2C based components which through 4-pin JST connectors can be quickly interfaced with development boards. The product line, which already features over 1800 products including, sensors, actuators, and QWiiC enabled development boards, keeps growing daily and the latest addition to the ecosystem is the QWiiC Sparkfun CO₂ Humidity and Temperature […]
Sparkfun’s MicroMod Family Adds the Teensy 4.0 board with an M.2 Connector
https://www.electronics-lab.com/sparkfuns-micromod-family-adds-the-teensy-4-0-board-with-an-m-2-connector/
Sparkfun launched the MicroMod Interface Ecosystem, a modular ecosystem of interchangeable processors and specialized carrier boards, in late 2020, to provide users with a solder-free rapid prototyping platform aimed at making the transition from prototypes to products easier and faster. The ecosystem has experienced tremendous success with new MicroMod Processor Boards, offering plug and play […]
Getting Started with Espressif’s ESP32-C3-DevKITM-1 on Arduino IDE
https://www.electronics-lab.com/getting-started-with-espressifs-esp32-c3-devkitm-1-on-arduino-ide/
Espressif Systems ESP32-C3-DevKit M-1 is an extremely powerful board for your IoT applications. Driven by the ESP32-C3FN4 chip, this low-power, low-cost, Wifi-Bluetooth-enabled board has its own unique place in the ESP32 board line-up. You can program your ESP32-C3-DevKITM-1 module in four ways: ESP-IDF Arduino IDE Eclipse Plugin VS Code Extension Interfacing the ESP32-C3-DevKITM-1 on Arduino […]
SK hynix Starts Mass Production of 1anm DRAM Using EUV Equipment
https://www.electronics-lab.com/sk-hynix-starts-mass-production-of-1anm-dram-using-euv-equipment/
SK hynix Inc. announced that it has started this month mass production of the 8 Gigabit (Gb) *LPDDR4 mobile DRAM based on the 1anm, which is the fourth generation of the 10nm process technology. * LPDDR4 (Low Power Double Data Rate 4): Low power DRAM for mobile devices. DDR refers to DRAM with the specifications […]
Renesas IPS2200 inductive position sensor IC is capable of providing the absolute rotor position
https://www.electronics-lab.com/renesas-ips2200-inductive-position-sensor-ic-is-capable-of-providing-the-absolute-rotor-position/
The IPS2200 is an industrial qualified, inductive position sensor IC capable of providing the absolute rotor position as sine and cosine The IPS2200 is an industrial qualified, inductive position sensor IC capable of providing the absolute rotor position as sine and cosine. This IC uses the physical principle of Eddy currents to detect the position of […]
ON Semiconductor NCP1342 is a highly integrated quasi-resonant flyback controller
https://www.electronics-lab.com/on-semiconductor-ncp1342-is-a-highly-integrated-quasi-resonant-flyback-controller/
The NCP1342 is a highly integrated quasi-resonant flyback controller suitable for designing high-performance off-line power converters The NCP1342 is a highly integrated quasi-resonant flyback controller suitable for designing high-performance off-line power converters. The integrated X2 capacitor-discharge feature enables the NCP1342 to achieve no-load power consumption below 30 mW. The controller features proprietary valley-lockout circuitry, ensuring […]