4 Channel Analog Video Distribution Amplifier
https://www.electronics-lab.com/4-channel-analog-video-distribution-amplifier/
The project presented here is a low-cost video distribution amplifier capable of driving up to four video lines. The amplifier is configured with a non-inverting gain of 2. The input video source is terminated in 75 Ohms and is applied to the high impedance non-inverting input. Each output line is connected to the op-amp’s output […]
3 Channel Analog Video Splitter with Video Amplifier
https://www.electronics-lab.com/3-channel-analog-video-splitter-with-video-amplifier/
If you need to drive multiple video gadgets or monitors from a single video signal source then this board is the right choice for you. This is a 3-channel video splitter with an amplifier and the circuit is built using discrete components. Q2 and Q1 act as a signal amplifier, Q3 act as output driver, […]
16 High Power LEDs Knight Rider Light – Arduino Compatible
https://www.electronics-lab.com/project/16-high-power-leds-knight-rider-light-arduino-compatible/
This is a Knight Rider LED Light and it is one of the best Arduino projects for beginners. This board drives 16 high-power LEDs to turn them ON one by one sequentially. This is an open-source Arduino compatible project that contains 16 high current MOSFETs, Atmega328 microcontroller, 5V regulator etc. The gate of IRLR7843 MOSFETs […]
High Accuracy Adjustable Overvoltage and Overcurrent Protectors using MAX17561
https://www.electronics-lab.com/project/high-accuracy-adjustable-overvoltage-and-overcurrent-protectors-using-max17561/
If you need safe power to run your project, then this circuit is a possible solution for you. This project provides protection to your system device against over-current, over-voltage, under-voltage, thermal overload, and reverse current flow control to the system device. Basically, this project can play a key role between the power supply and the […]
“EnerCera” Battery Series helps develop Maintenance-Free IoT Devices
https://www.electronics-lab.com/enercera-battery-series-helps-develop-maintenance-free-iot-devices/
NGK INSULATORS, LTD., announced that it has commenced collaboration with Renesas Electronics Corporation, on promoting the widespread adoption of maintenance-free IoT devices. As the first phase of collaboration, NGK and Renesas jointly-developed a reference design for a wireless air quality sensing system that will contribute to the realization of a decarbonized society. The system was […]
ST’s STEVAL-USBPD27S To Speed Up The Built Time of Fast-Charging USB Power Adapters
https://www.electronics-lab.com/sts-steval-usbpd27s-to-speed-up-the-built-time-of-fast-charging-usb-power-adapters/
USB has evolved over the last few years with the latest launch of the ST’s standalone VBUS-based controller. To help build a compact and efficient power adapter that provides up to 27W with zero-power operation when no cable is connected, STMicroelectronics has unveiled a new reference design with Programmable Power Supply (PPS). All new ST’s […]
STMicroelectronics Evaluation Boards to Boost the G3-PLC Hybrid Connectivity into Smart Devices
https://www.electronics-lab.com/stmicroelectronics-evaluation-boards-to-boost-the-g3-plc-hybrid-connectivity-into-smart-devices/
A couple of weeks back STMicroelectronics announced its new addition to the development ecosystem for its ST8500 programmable power-line communication (PLC) modem chipset – STMicroelectronics Evaluation Boards. For those new to the connectivity of smart-grid and IoT devices, G3-PLC Hybrid is a: “standard that offers extended capabilities for smart grid and IoT applications in one […]
Shenzhen LC Technology’s Cherry Pi PC V7 is a Replica of Orange Pi PC
https://www.electronics-lab.com/shenzhen-lc-technologys-cherry-pi-pc-v7-is-a-replica-of-orange-pi-pc/
We saw Orange Pi board, a clone of a Raspberry Pi featuring almost all functionalities similar to Raspberry Pi 2. At present, Shenzhen LC Technology has launched a clone of Orange Pi PC known as Cherry Pi PC V7 featuring the same quad-core processor. That is Allwinner’s quad-core H3 SoC supporting the Linux environment. The […]
Axiomtek’s Outdoor AI Inference System with NVIDIA® Jetson™ Xavier™ NX for AIoT Applications – AIE800-904-FL
https://www.electronics-lab.com/axiomteks-outdoor-ai-inference-system-with-nvidia-jetson-xavier-nx-for-aiot-applications-aie800-904-fl/
Axiomtek – a world-renowned leader relentlessly devoted in the research, development, and manufacture of series of innovative and reliable industrial computer products of high efficiency – is pleased to introduce the AIE800-904-FL, its latest robust Artificial Intelligence (AI) embedded system. This AI inference system adopts the NVIDIA® Jetson Xavier™ NX platform which has a powerful 6-core […]
Epishine, Ynvisible and Evonik showcase a self-powered smart signage solution
https://www.electronics-lab.com/epishine-ynvisible-and-evonik-showcase-a-self-powered-smart-signage-solution/
Joint technology demonstrator showcases new solutions for retail, supply-chain and in-home devices. Epishine AB, Ynvisible Interactive (a leading company in printed and flexible displays) and Creavis (the strategic innovation unit of Evonik Industries AG – an Essen, Germany headquartered global specialty chemicals group) announce the creation of a new joint demonstrator featuring Evonik’s TAeTTOOz® printed […]