Qorvo QPL1812 Single Ended RF Amplifier is suitable for CATV
https://www.electronics-lab.com/qorvo-qpl1812-single-ended-rf-amplifier-is-suitable-for-catv/
Qorvo QPL1812 Single Ended Amplifier is a high-performance pHEMT MMIC amplifier designed to run from a single 8V supply, without the need for an external dropping resistor. The 75Ω CATV amplifier features a high gain of 19dB, high linearity, and low distortion from 50MHz to 1800MHz. QPL1812 offers an integrated active bias circuit to provide […]
ZMOD4410 – Indoor Air Quality Sensor Platform is designed for detecting total volatile organic compounds
https://www.electronics-lab.com/zmod4410-indoor-air-quality-sensor-platform-is-designed-for-detecting-total-volatile-organic-compounds/
Renesas Electronics Corporation has introduced the ZMOD4410, a software configurable Indoor Air Quality (IAQ) sensor platform with IP67 qualified waterproof option. The unique hermetically sealed package protects the device from water and dust with the help of the hydrophobic and oleophobic material that is permeable to humidity and volatile organic compounds (VOCs) at the same […]
Fast graphics with ready-to-use modules based on FT81x
https://www.electronics-lab.com/fast-graphics-with-ready-to-use-modules-based-on-ft81x/
The new gen4-FT81x display modules from 4D Systems represent a ready-made solution based on graphics chips from Bridgetek. The main advantages include easy and intuitive programming, powerful SW IDE, many useful functions and three display sizes. (SOS electronic) FT81x graphics processors were introduced in our recent article. For many years, we have been associating 4D […]
AQV258H5 Series HE 1 Form A Type High-Voltage PhotoMOS® Relays
https://www.electronics-lab.com/aqv258h5-series-he-1-form-a-type-high-voltage-photomos-relays/
Panasonic’s relays come in a DIP6 package for high-voltage control and are ideal for industrial battery monitoring systems (BMS) Panasonic’s AQV258H5 series HE 1 Form A Type PhotoMOS® relays offer 1,500 V high-voltage. These relays provide high voltage switching reliability and application safety in BMS. The AQV258H5 series can be utilized in applications where traditional electromechanical […]
Modules with Wirepas Mesh protocol for Massive IoT
https://www.electronics-lab.com/modules-with-wirepas-mesh-protocol-for-massive-iot/
Würth Elektronik has entered into a partnership with the Finnish software developer Wirepas. The aim of the agreement is to offer a portfolio of radio modules that use the IoT network protocol Wirepas Mesh from 2021. This innovative technology can be used to create large IoT networks, for example of battery-powered sensors, in which each […]
High voltage Half-Bridge with Current Feedback using L6390
https://www.electronics-lab.com/high-voltage-half-bridge-with-current-feedback-using-l6390/
The project presented here is a versatile high voltage Half-Bridge with current feedback. The board is built using L6390 IC from ST Semiconductor. It is suitable for DC-DC converters, EHT drivers, induction heater drivers, battery chargers, LED drivers, DC motor speed controller and field-oriented control (FOC) motor driving application etc. The user can make a […]
TSCR4 LED Driver ICs delivering improved performance at comparable cost
https://www.electronics-lab.com/tscr4-led-driver-ics-delivering-improved-performance-at-comparable-cost/
The Taiwan Semiconductor TSCR4 family of linear CMOS LED driver ICs offers a drop-in replacement for legacy bipolar drivers with much improved performance . These constant current drivers provide stable LED current over a wide range of conditions including source voltage variations and changes in load or temperature variations. Compared to legacy bipolar LED drivers, the […]
ULN2003 – Seven Darlington arrays in new TSSOP16 package
https://www.electronics-lab.com/uln2003-seven-darlington-arrays-in-new-tssop16-package/
The ULN2001, ULN2002, ULN2003 and ULN2004 are high-voltage, high-current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel is rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board […]
Avnet AVT9152 Module offers a high degree of flexibility for IoT product development
https://www.electronics-lab.com/avnet-avt9152-module-offers-a-high-degree-of-flexibility-for-iot-product-development/
The Avnet AVT9152 Module combines BLE, LTE and GPS technologies into a module targeting a broad range of IoT applications where low power and small size matters. Market ready, the module supports both LTE-M and NB-IOT technology and is certified to conform with FCC, CE, RCM and BQB. The nRF52840 Bluetooth 5.2/Bluetooth LE advanced multiprotocol […]
ATmega3208 Powered Development Board for Embedded Applications
https://www.electronics-lab.com/atmega3208-powered-development-board-for-embedded-applications/
Microchip has recently launched a simple yet powerful development board aimed at embedded and IoT applications. As the name suggests, the development board is powered by the ATemga3208 from Microchip. The microcontroller features an 8-bit AVR processor clocked at up to 20MHz and comes with up to 32 KB Flash, 4 KB SRAM and 256 […]