TDK announces world’s first MIPI standard SoundWire microphone
https://www.electronics-lab.com/tdk-announces-worlds-first-mipi-standard-soundwire-microphone/
TDK Corporation introduces the world’s first MIPI Standard SoundWire® microphone for mobile, IoT and other consumer devices. This multimode microphone pushes the boundaries of digital microphone acoustic performance while providing advanced feature sets with very low power. Highlights T5808 is a 66 dB SNR/135 dB AOP digital microphone in a 3.5 × 2.65 × 0.98 mm package Supports […]
Meet the NanoPi R2S from FriendlyElec
https://www.electronics-lab.com/meet-nanopi-r2s-friendlyelec/
In a bid to achieve full rate dual Gigabit, the FriendlyElec’s team is currently working on its latest open-source IoT application artifact which is an upgraded version of the NanoPi R1S SBC & Gateway, called the NanoPi R2S. In contrast to the NanoPi R1S which came with 512MB RAM, an Allwinner H3 / H5 processor […]
Serpentine – Tiny CircuitPython-Based Development Board
https://www.electronics-lab.com/serpentine-tiny-circuitpython-based-development-board/
CircuitPython’s user base is growing even though a lot of people believe Micropython is a better route. It enjoys the rigorous backing 0f one of the major drivers of the Maker community (Aka Adafruit) and recently has been the “embedded Python” stack of choice for several open-source development boards. One such board is the Serpentine […]
Acromag Combines A/D, D/A, Digital I/O and Counter/Timer Channels on AcroPack
https://www.electronics-lab.com/acromag-combines-d-d-digital-o-counter-timer-channels-acropack/
Acromag adds another military-grade measurement and control module to its AcroPack series of ruggedized mini PCIe I/O modules. The new AP730 multi-function I/O module performs analog input, analog output, discrete I/O and counter/timer functions. A variety of carrier cards can host up to four modules and are available in PCIe, VPX, XMC, CompactPCI-Serial, and mini-ITX […]
Designing in MOSFETs for safe and reliable gate-drive operation
https://www.electronics-lab.com/designing-mosfets-safe-reliable-gate-drive-operation/
The MOSFET gate-source threshold voltage (VGS-th) and maximum gate-source voltage(VGS-max) are key parameters that are critical to the reliable operation of MOSFETs. The threshold voltage represents the voltage at which the MOSFET starts to turn on, whilst the maximum gate-source voltage is the maximum gate-source voltage that the MOSFET can withstand safely. VGS-max ratings vary […]
Inside the digital clock from a Soyuz spacecraft
https://www.electronics-lab.com/inside-digital-clock-soyuz-spacecraft/
Ken Shirriff published an interesting article on his blog. He writes: We recently obtained a clock that flew on a Soyuz space mission.1 The clock, manufactured in 1984, contains over 100 integrated circuits on ten circuit boards. Why is the clock so complicated? In this blog post, I examine the clock’s circuitry and explain why […]
Network Clock using ESP8266 and OLED display
https://www.electronics-lab.com/network-clock-using-esp8266-oled-display/
There are several situations where using an RTC could adversely affect your project by increasing cost, size, time accuracy or IO requirements. To prevent this, especially in ESP/WiFi-based or other clock-reliant projects, makers usually turn to obtain time information from NTP servers. I recently came across a project by BitsandBlobs which used standalone NTP Servers […]
Network Clock using ESP8266 and OLED display
https://www.electronics-lab.com/project/network-clock-using-esp8266-oled-display/
There are several situations where using an RTC could adversely affect your project by increasing cost, size, time accuracy or IO requirements. To prevent this, especially in ESP/WiFi-based or other clock-reliant projects, makers usually turn to obtain time information from NTP servers. I recently came across a project by BitsandBlobs which used standalone NTP Servers […]
Arduino RFID Reader using the ArduiTouch MKR Enclosure
https://www.electronics-lab.com/arduino-rfid-reader-using-arduitouch-mkr-enclosure/
RFID based projects are one of the most popular Arduino projects out there and we have also built a couple of them here too, but I recently came across an RFID access control project by hwhardsoft that was built using the ArduiTouch MKR enclosures. The ready-made nature of the enclosures and their existence for different […]
Realtek8720DN 2.4G/5G Dual Bands Wireless and BLE5.0 Combo Module
https://www.electronics-lab.com/realtek8720dn-2-4g-5g-dual-bands-wireless-ble5-0-combo-module/
Realtek8720DN is a WiFi and Bluetooth module that has dual bands for WiFi communication. It is worth saying that this little module can support WiFi 5G and Bluetooth Low Energy 5.0 as well. This WiFi and Bluetooth module is a highly integrated WiFi and Bluetooth module with the main chip RTL8720DM, it can be regarded […]