UDOO X86 Microboard Breakdown
https://www.electronics-lab.com/udoo-x86-microboard-breakdown/
The UDOO X86 board is a single board computer based on Intel quad core 64-bit chipset that runs Windows 10 and any flavor of Linux. The board also has a separate chipset with a full implementation of Arduino. But what make it special is the 64-bit operating system, the USB 3.0 support, up to 8GB […]
Continuity Tester using ATtiny85
https://www.electronics-lab.com/continuity-tester-using-attiny85/
This article describes a simple continuity tester based on an ATtiny85. The tester features a buzzer that sounds to help you determinate the trace continuity. It is designed for checking circuit wiring, or tracing out the tracks on a PCB. According to it’s author David Johnson-Davies it has a low threshold resistance of 50Ω to […]
Pi/104 – Pi Compute carrier board
https://www.electronics-lab.com/pi-104-pi-compute-carrier-board/
Pi/104 is a Pi Compute carrier board in PC/104 format with industrial durability. The Pi Compute Module is a powerful tool for custom electronics projects. But if your project requires industrial grade specifications, you’re currently out-of-luck. This is where Pi/104 comes in – with a wide temperature rating and a power supply that encompasses common […]
Hi-Fi Stereo Headphone Amplifier using LME49600
https://www.electronics-lab.com/hi-fi-stereo-headphone-amplifier-using-lme49600/
This project is the ideal solution for high output, high performance high fidelity stereo head phone amplifier. The project consists of Op-Amp LME498720 and LME49600 as output driver. The LME49600 is able to drive 32Ω headphones to a dissipation of greater than 500mW at 0.00003% THD+N while operating on ±12V power supply voltages. The LME49600 […]
Hi-Fi Stereo Headphone Amplifier using LME49600
https://www.electronics-lab.com/project/hi-fi-stereo-headphone-amplifier-using-lme49600/
This project is the ideal solution for high output, high performance high fidelity stereo head phone amplifier. The project consists of Op-Amp LME49720 and LME49600 as output driver. The LME49600 is able to drive 32Ω headphones to a dissipation of greater than 500mW at 0.00003% THD+N while operating on ±12V power supply voltages. The LME49600 […]
RoboBee – A Flying Microbot That Can Perform Search And Rescue Missions
https://www.electronics-lab.com/robobee-flying-microbot-can-perform-search-rescue-missions/
Inspired by the biology of a bee, researchers at the Wyss Institute developed RoboBees, man-made microbots that could perform endless roles in agriculture or disaster relief. A RoboBee is about half the size of a paper clip, weighs less than one-tenth of a gram, and flies using materials that contract when an electric pulse is applied. Now, they […]
Wireless power in AA battery format
https://www.electronics-lab.com/wireless-power-aa-battery-format/
Ossia has created the world’s first wirelessly-powered alternative to disposable AA batteries. The “Forever Battery” puts a long distance wireless power receiver into an AA battery format. The technology can receive up to 4W from a nearby RF transmitter (Cota transmitter), and includes a data link. [via] Forever Battery bridges the gap between the battery-wire […]
Characteristics and applications of fast recovery epitaxial diodes
https://www.electronics-lab.com/characteristics-applications-fast-recovery-epitaxial-diodes/
Read about epitaxial ultrafast diodes in thia app note from IXYS. (PDF) During the last 10 years, power supply topology has undergone a basic change. Power supplies of all kinds are now constructed so that heavy and bulky 50/60 Hz mains transformers are no longer necessary. These transformers represented the major part of volume and […]
SYZYGY Brain-1 – FPGA development platform featuring the SYZYGY standard
https://www.electronics-lab.com/syzygy-brain-1-fpga-development-platform-featuring-syzygy-standard/
SYZYGY Brain-1 is an open source, modular ARM + FPGA development platform featuring the new SYZYGY standard for high-performance peripherals. This new development board bridges the gap between Pmods and FMCs allowing high performance peripherals to be used with ease. The author claims it’s the first realization of a carrier board supporting SYZYGY that can be […]
Universal OpAmp Evaluation Board Using LMV321
https://www.electronics-lab.com/universal-opamp-evaluation-board-using-lmv321/
The Universal Op-Amp Development board is a general purpose blank circuit board that simplify prototyping circuits for a variety of Op-Amp circuits. The evaluation module board design allows many different circuits to be constructed easily and quickly. This board supports single SOT23-5 package. Universal single Operational Amplifier (Op-Amp) board is designed to aid in the […]