Arduino Nano to PIC40/28 Pin Shield
https://www.electronics-lab.com/arduino-nano-pic40-28-pin-shield/
Arduino Nano to PIC40/28 PIN development shield is an extension for Arduino Nano. This project is useful to create many projects using PIC40/28PIN shield published on electronics-lab.com, refer to schematic and connection diagram to use this shield. Two on board regulators are provided which outputs 5V DC and 3.3V DC, this dual supply helps many […]
Arduino Nano to PIC40/28 Pin Shield
https://www.electronics-lab.com/project/arduino-nano-pic40-28-pin-shield/
Arduino Nano to PIC40/28 PIN development shield is an extension for Arduino Nano. This project is useful to create many projects using PIC40/28PIN shield published on electronics-lab.com, refer to schematic and connection diagram to use this shield. Two on board regulators are provided which outputs 5V DC and 3.3V DC, this dual supply helps many […]
Universal OpAmp Evaluation Board Using LMV321
https://www.electronics-lab.com/project/universal-opamp-evaluation-board-using-lmv321/
The Universal Op-Amp Development board is a general purpose blank circuit board that simplify prototyping circuits for a variety of Op-Amp circuits. The evaluation module board design allows many different circuits to be constructed easily and quickly. This board supports single SOT23-5 package. Universal single Operational Amplifier (Op-Amp) board is designed to aid in the […]
Distance Measuring Sensor Shield for Arduino Nano Using GP2Y0D810Z0F
https://www.electronics-lab.com/distance-measuring-sensor-shield-arduino-nano-using-gp2y0d810z0f/
The project published here is a distance measuring sensor shield for Arduino Nano including power driver BJT transistor to drive a load like solenoid, motor or LED. This project can be used as Arduino shield or as stand-alone sensor. GP2Y0D810Z0F from Sharp is heart of the project, The sensor is a composed of an integrated […]
Distance Measuring Sensor Shield for Arduino Nano Using GP2Y0D810Z0F
https://www.electronics-lab.com/project/distance-measuring-sensor-shield-arduino-nano-using-gp2y0d810z0f/
The project published here is a distance measuring sensor shield for Arduino Nano including power driver BJT transistor to drive a load like solenoid, motor or LED. This project can be used as Arduino shield or as stand-alone sensor. GP2Y0D810Z0F from Sharp is heart of the project, The sensor is a composed of an integrated […]
Rotary Encoder with Arduino and Nokia 5110 LCD Tutorial
https://www.electronics-lab.com/rotary-encoder-arduino-nokia-5110-lcd-tutorial/
Today we will take a look at using a rotary encoder with Arduino and displaying rotation data on the Nokia 5110 LCD display. A rotary encoder is an Electro-mechanical device that converts angular position or the rotation of a shaft into analog or digital values. By turning the shaft to the right or left, we […]
Rotary Encoder with Arduino and Nokia 5110 LCD Tutorial
https://www.electronics-lab.com/project/rotary-encoder-arduino-mega-nokia-5110-display-tutorial/
Introduction Today we will take a look at using a rotary encoder with Arduino and displaying rotation data on the Nokia 5110 LCD display. A rotary encoder is an electro-mechanical device that converts angular position or the rotation of a shaft into analog or digital values. They are mainly of two types, absolute and incremental […]
xaVNA – A low cost two port Vector Network Analyzer
https://www.electronics-lab.com/xavna-low-cost-two-port-vector-network-analyzer/
xaVNA is a simple and cheap vector network analyzer that allows you to easily tune up antennas, filters, and amplifiers by plugin it to USB. It is able to display smith charts/graphs on the including PC software. The main board connects to a PC through usb and communicates via a virtual serial port device; the […]
COLIBRÌ: the driver for RGBW LEDs
https://www.electronics-lab.com/colibri-driver-rgbw-leds/
Boris Landoni @ open-electronics.org designed COLIBRI, a board able to drive 4 color LEDs. He writes: Recently some multicoloured power LEDs have appeared on the market and, differently from the more common RGB LEDs, they incorporate a white LED, as an addition: they are named RGBW (Red, Green, Blue, White) just because of this. They […]
Arduino controlled Dual Mono AK4490 DAC (Part 1)
https://www.electronics-lab.com/arduino-controlled-dual-mono-ak4490-dac-part-1/
This article is the first of a series detailing the design and build process of an Arduino controlled Dual Mono AK4490 DAC by DimDim: The design goal was to do a dual mono design so as to maximize SNR and channel separation. A 4-layer PCB design was chosen so as to have a very solid, low […]