DC205 – Precision DC voltage source
https://www.electronics-lab.com/dc205-precision-dc-voltage-source/
The DC205 low-noise, high-resolution DC voltage source is the right tool when a precision bias source is needed. Its bipolar, four-quadrant output delivers up to 100 V with 1 µV resolution and up to 50 mA of current. In 4-wire mode (remote sense), the instrument corrects for lead resistance delivering accurate potential to your load. […]
Adjustable Constant Current LASER Diode/LED driver
https://www.electronics-lab.com/project/adjustable-constant-current-laser-diode-led-driver/
I was testing a couple of low-cost laser diodes that come from china and I was wondering why those diodes don’t have any protection/driver circuitry. Those diodes come with a simple series resistor for current control which is not a good idea nor stable. Laser diodes are harmful and should have some sort of constant […]
Microchip MCP2518FD : External CAN FD Controller with SPI Interface
https://www.electronics-lab.com/microchip-mcp2518fd-external-can-fd-controller-with-spi-interface/
The MCP2518FD is a cost-effective and small-footprint External CAN FD Controller that can be easily added to a microcontroller with an available SPI interface. Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking a CAN FD peripheral or that doesn’t have enough CAN FD channels. The MCP2518FD supports […]
Delta T31SN 100W DC/DC family in compact 1/32 brick format
https://www.electronics-lab.com/delta-t31sn-100w-dc-dc-family-in-compact-1-32-brick-format/
T31SN series of 1/32 Brick, 9~53V input, single output, non-isolated DC/DC converters, are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. This product family provides up to 100 watts of power or 8A of output current. With creative design technology and optimisation of component placement, these […]
Meet the Tigard Board; A new FT2232H-Based USB Serial Adapter/Debuggers
https://www.electronics-lab.com/meet-the-tigard-board-a-new-ft2232h-based-usb-serial-adapter-debuggers/
SecurityHardware.com is set to take FT2232H-based USB Serial Adapters and Debuggers to the Next Level. The Portland-based company will soon be launching a Crowdfunding campaign for its latest design, an open-source FTDI FT223H-based multi-protocol, multi-voltage hardware hacking device called Tigard. Tigard is a one-stop board for developers looking for something a little more than the […]
Launchpad Launches as a Cheap Arduino Nano alternative
https://www.electronics-lab.com/launchpad-launches-as-a-cheap-arduino-nano-alternative/
We can’t seem to get enough of Arduino Nano. It has been a “go to” boards for developers since its launch in 2008. We see developers and engineers try to upgrade the Arduino. This has moved Clyde D. Corpuz to launch the Launchpad, which is a small, Arduino compatible microcontroller development board that does away with […]
Developer Board 4 V3 – Embedded Platform based on Qualcomm Snapdragon 410E SoC
https://www.electronics-lab.com/developer-board-4-v3-embedded-platform-based-on-qualcomm-snapdragon-410e-soc/
Developer Board 4 V3 is a single board computer based on Qualcomm Snapdragon 410E SoC with 2GB DDR3, 16GB EMMC, HDMI, MIPI-CSI, 40- and 60-pin expansion connectors. Fully structurally compatible with the 96boards CE standard.It features advanced processing power, WLAN, Gigabit Ethernet, Bluetooth, GPS, all packed into a board the size of a credit card.The […]
nRF9160 Feather Launches For $99 With GPS Support
https://www.electronics-lab.com/nrf9160-feather-launches-for-99-with-gps-support/
The nRF9160 Feather by Jared Wolff (aka Circuit Dojo LLC) is an electronics development board, which is a system-in-package part of nRF91 series that enables NB-IoT and eMTC (LTE-M) IoT connectivity, as well as assisted GPS. The package is available in an Adafruit Feather form factor. nRF9160 Feather board supports both CAT M1 LTE and NB-IoT […]
Free Elektor Article: The RV-3029-C2 “Swiss Clock”
https://www.electronics-lab.com/free-elektor-article-the-rv-3029-c2-swiss-clock/
Off-air awfully accurate drop-in RTC & calendar on I²C This RTC & Calendar board is built around Micro Crystal’s type RV-3029-C2 integrated circuit. The ‘3029 is a real-time-clock/calendar (RTC) cheerfully communicating via the I2C protocol. It offers good precision out of the box, and fine precision when tweaked. Features: Micro Crystal RV-3029-C2 RTC/Calendar chip Battery […]
Avnet’s Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi
https://www.electronics-lab.com/avnets-renesas-zmod4410-indoor-air-quality-hat-for-raspberry-pi/
Sensor HAT based on Renesas ZMOD4410 module accelerates design of products requiring indoor air quality measurement capabilities Avnet’s Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi is an evaluation, development and quick-prototyping tool intended for professionals developing a wide variety of mains-powered and battery-powered products with indoor air quality monitoring capability. The HAT features […]