Open Source OAK AI Kit For Spatial AI system
https://www.electronics-lab.com/open-source-oak-ai-kit-for-spatial-ai-system/
OpenCV has announced their AI Kit called OAK on Kickstarter. It is an MIT-licensed open-source software and Myriad X-based hardware solution for computer vision at any scale. OAK incorporates the OAK API software and two different types of hardware namely OAK-1, a, and OAK-D. The hardware is tiny artificial intelligence (AI) and computer vision (CV) […]
Super Bright Nixie-Like Linear Dot Display
https://www.electronics-lab.com/super-bright-nixie-like-linear-dot-display/
LED Bar graphs are one of the best ways to provide visual feedback to users in projects where using a screen might be an overkill. Especially in projects where you need to indicate level, intensity, and other values that are worth representing on a bar graph. The quality of LED bar graphs has not really […]
Wireless SD Card Reader using ESP8266
https://www.electronics-lab.com/wireless-sd-card-reader/
One of the good things about being a maker is the power it gives you to create your own stuff. Believing USB devices have not lived up to their designation of truly being universal and working irrespective of the kind of ports they are plugged into, Hackaday user, Neutrino, recently embarked on a mission to […]
microUPDI – Pro-Micro Based UPDI Programmer
https://www.electronics-lab.com/microupdi-pro-micro-based-updi-programmer/
Thanks to the increased popularity of the recent ATtiny series of microcontrollers, there has been an increase in the number of open-source UPDI programmers out there. We have covered quite a number of them including the brilliant UPDI programmer compatible with Arduino IDE but we certainly have not seen the end of new designs. One […]
Trenz TE0802: Zynq UltraScale+ MPSoC Development Board
https://www.electronics-lab.com/trenz-te0802-zynq-ultrascale-mpsoc-development-board/
Designed and manufactured by our partner, Trenz Electronic, the TE0802 is a development board integrating a Xilinx Zynq UltraScale+ MPSoC device. The board features multiple connectivity interfaces, including DisplayPort, VGA, USB 3.0, and Gigabit Ethernet RJ45. With a cost-optimized ZU2CG UltraScale+ MPSoC, embedded developers and users familiar with Arm Cortex-R and Arm Cortex-A53 processors can […]
8 Channel Inductive Load Driver Arduino Shield
https://www.electronics-lab.com/project/8-channel-inductive-load-driver-arduino-shield/
The 8 Channel Driver Arduino UNO Shield is designed to enable users to switch inductive loads for up to 800mA each channel and up to 24V DC with no heat-sink needed. It is ideal for such applications as driving 2x unipolar stepper motors, solenoids, relays, and small DC motors. It uses 2x DRV8803 Chip from […]
Introducing SparkFun Services
https://www.electronics-lab.com/introducing-sparkfun-services/
Electronics retailer SparkFun Electronics has announced the launch of nine new value-added services covering board development, logistics, and training to all its customers. By Rich Pell @ eenewsembedded.com Over the last decade, says the company, it has tested and refined ideas for services by partnering with companies such as Digi-Key, RedHat, Sphero and u-blox, resulting […]
Audio VU/Sound Level Meter with LM339
https://www.electronics-lab.com/audio-vu-sound-level-meter-with-lm339/
This is an “Audio VU Meter” or “Sound Level Meter”, it is a general-purpose bar-graph Audio VU meter designed for fun projects. All you need is to hook up one wire to the output of the audio amplifier’s speaker pin along with GND and see the magic. The response of the circuit is very fast […]
Toradex announces availability of Dahlia Carrier Board for Verdin SoMs
https://www.electronics-lab.com/toradex-announces-availability-of-dahlia-carrier-board-for-verdin-soms/
Toradex, a leader in embedded computing, announces the release and availability of Dahlia, the latest addition to its carrier board offerings for the Verdin family of System on Modules (SoMs). Dahlia provides a simple and convenient development platform for the Verdin SoMs. The board provides easy access to the most common interfaces in a compact […]
Push the Edge with UP Xtreme Lite
https://www.electronics-lab.com/push-the-edge-with-up-xtreme-lite/
AAEON, a leading developer of edge computing solutions, introduces the latest from UP Board, the UP Xtreme Lite. UP Xtreme Lite brings the powerful 8th Generation Intel® Core™ processors on a platform that’s even easier for developers on a budget. The UP Xtreme Lite is designed to provide developers with a platform that’s flexible, powerful, […]