Light - Power Control Projects

Arduino Bluetooth Relay Switch

Arduino Bluetooth Relay Switch

This Bluetooth Relay Switch enables users to control lights, fans, or other devices using a Bluetooth app on an Android device.


0 comments Tested
High Current/High Voltage OPAMP with Boost Output Current Greater Than 1A

High Current/High Voltage OPAMP with Boost Output Current Greater Than 1A

This project provides High Voltage and High Current output swing.


0 comments Tested
PI Temperature Control Amplifier for Thermoelectric Cooler (TEC) Driver

PI Temperature Control Amplifier for Thermoelectric Cooler (TEC) Driver

This is a simple Proportional, Integral (PI) temperature control amplifier.


0 comments Tested
Single-Channel Smart High-Side Power Switch with Programmable Current Limit

Single-Channel Smart High-Side Power Switch with Programmable Current Limit

This is a single-channel, fully-protected, high-side power switch with programmable current-limit.


0 comments Tested
I2C DAC Controlled Electronic Load – Battery Performance Tester

I2C DAC Controlled Electronic Load – Battery Performance Tester

The project presented here is an I2C electronic load, intended for testing power supplies, solar panels, batteries, and supercapacitors.


0 comments Tested
Half-Bridge with Ultra-Precise Current Sense Feedback for Solenoid

Half-Bridge with Ultra-Precise Current Sense Feedback for Solenoid

A Half-bridge converter is widely used in applications such as DC-DC converters, switch mode power supplies, inverters, motor drivers, resistive loads, and solenoid drivers.


0 comments Tested
Xenon Flash Tube Driver

Xenon Flash Tube Driver

This is a Xenon Flash tube driver board and consists of a high voltage AC to DC converter circuit, a DC storage capacitor, a trigger circuit that will fire the xenon lamp, an Optocoupler to control the flashes etc.


0 comments Tested
Solenoid, Relay, Valve Driver with Current Regulation

Solenoid, Relay, Valve Driver with Current Regulation

The project presented here is a PWM current driver for solenoids, Relays, and valves.


0 comments Tested
Self-Oscillating Full-Bridge Using IRS2453

Self-Oscillating Full-Bridge Using IRS2453

This is a Self-oscillating full-bridge project built using the IRS2453 chip.


1 comment Tested
DC Electronic Load – 1A

DC Electronic Load – 1A

This is a very precise Electronic Load project built using the ultra-Precision, Low-Noise OPAMP MAX44251 from Analog Devices.


0 comments Tested
Linear Current Source LED Driver with Dimmer Input

Linear Current Source LED Driver with Dimmer Input

The compact module shown here is a linear current source for LED driver and it’s ideal for automotive LED lighting applications.


0 comments Tested
55V – 3A Half-Bridge Power Driver Module

55V – 3A Half-Bridge Power Driver Module

This Half-bridge module provides current measurement and regulation features for various loads.


0 comments Tested