Projects Projects
DC Output Solid State Relay
DC Output Solid State Relay 10Amps 60V DC (Optically Isolated Input) This project has been designed around TLP250/352 which is Opto-Coupler IGBT/MOSFET Gate Driver from Toshiba and Mosfet IRFP260 from IR, This relay consists of optically isolated gate driver and low impedance Mosfet.
555 Based DC Motor Speed Controller
555 DC Motor Speed Controller project will control the speed of a DC motor connected to it.
5V @ 2A Step Down Converter using TPS54202
The circuit shown here is a step down converter which can convert an input voltage varying from 8V to 28V to 5V.
Power ON Delay Switch
Power-ON Delay Switch which can be used in all applications requiring a delay during power-on from 1 to 60 seconds.
AC Solid State Relay
This simple circuit designed around Solid State Relay S216S02 from SHARP.
Lux Meter Module
LUX Meter project has been design to measure the illumination.
230 VAC Timer
Classic AC 230 V Timer project can be used in all application requiring a timer of up-to 3 Minutes to operate or control any AC mains load of up-to 200 Watts.
2.5V-4.2V input to 3.3V output – 1A Buck Boost Converter using LTC3441
This circuit can produce an output of 3.3V and 1A current continuously for a voltage input varying from 2.5V to 4.2V.
2 Digit 99 Seconds Timer
2 Digit Count Down Timer is a utility Count Down timer project for upto 99 seconds of countdown time.
Dual Motor L298 H-Bridge Motor Control
Dual Motor L298 H-Bridge Control project can control two DC motors connected to it.
Light To Audio Oscillator
Light Sensitive Audio Oscillator project is a fun loving project which will create different sound effects depending on the light falling on the...
1.2V to 35V DC-DC Converter
1.2V to 35V Adjustable DC-DC Converter project has been design around TI’s LM2576-ADJ IC.