RPGA Feather is an RP2040 and iCE40 FPGA Powered Dev Board in A Adafruit Feather From Factor
FPGA

RPGA Feather is an RP2040 and iCE40 FPGA Powered Dev Board in A Adafruit Feather From Factor

RPGA Feather by Oak Development Technologies is an RP2040 and iCE40FPGA-powered development board in an Adafruit Feather form factor. The board is tiny and features an MCP73831 1S LiPo charger, a USB 2.0 Type-C connector for power and programming, and an RGB LED driven by the...

Continue Reading
1.094
Views
0 Comments
Adafruit Feather RP2040: Another feather board but with a Raspberry Pi microcontroller
Raspberry Pi

Adafruit Feather RP2040: Another feather board but with a Raspberry Pi microcontroller

The Adafruit Feather RP2040 is an embedded device with the popular Feather form factor, designed to cater to the needs of long-range IoT wireless communication. At the heart of the Adafruit Feather RP2040 is the Raspberry Pi RP2040 microcontroller, which ensures high performance and low...

Continue Reading
1.121
Views
0 Comments
Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython
ArduinoIoTTop Stories

Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython

The Cytron Maker Feather AIoT S3 is an ESP32-S3 board that fits the Adafruit Feather form factor. It is good for makers and STEM education because it has LEDs for GPIOs, a buzzer, expansion headers and connectors, and support for CircuitPython and Arduino. The WiFi and Bluetooth LE IoT...

Continue Reading
1.204
Views
0 Comments
SparkFun launches a new Thing Plus Development Board – expected to work like a Wi-Fi module
IoT

SparkFun launches a new Thing Plus Development Board – expected to work like a Wi-Fi module

Colorado-based embedded electronics manufacturer, SparkFun, is back with another exciting development board in the same form factor as the Adafruit Feather boards. The SparkFun Thing Plus DA16200 development board has an integrated ultra-low power Wi-Fi system-on-chip. The Wi-Fi SoC...

Continue Reading
1.112
Views
1 Comments
Actinius Icarus is a cellular IoT board with Nordic Semi nRF9160 SiP
IoTTop Stories

Actinius Icarus is a cellular IoT board with Nordic Semi nRF9160 SiP

Amsterdam-based embedded device manufacturer Actinius has launched a cost-effective cellular IoT board in a feather wing form factor, Icarus, built around the Nordic Semi nRF9160 modem and combines LTE-M and NB-IoT connectivity. Adafruit Feather boards have been very popular due to...

Continue Reading
1.220
Views
0 Comments
Adafruit Unveils the Upgraded ESP32 Feather V2 with ESP32 Pico Mini module
IoT

Adafruit Unveils the Upgraded ESP32 Feather V2 with ESP32 Pico Mini module

For over four years, we have seen the success of the Adafruit HUZZAH32 Feather board, which is still available for purchase on the Adafruit e-store. With its success comes the need to refresh and redesign to provide more functionalities to the board. Similarly, but not, in particular,...

Continue Reading
1.260
Views
1 Comments
Adafruit Releases ESP32-S2 TFT Feather Board with Wi-Fi And Built-in Native USB
Mcu

Adafruit Releases ESP32-S2 TFT Feather Board with Wi-Fi And Built-in Native USB

Adafruit feather boards have been successful in fulfilling the demands of the maker community. Yet another Adafruit ESP32-based TFT panel-mounted feather board with the support for CircuitPython or Arduino. Onboard IPS TFT color display gives you the flexibility to work on a 240 x 135...

Continue Reading
1.259
Views
0 Comments
BastWAN RAK4260 Module Based Dev-Board in Feather Form Factor
IoT

BastWAN RAK4260 Module Based Dev-Board in Feather Form Factor

With the increasing popularity of the Adafruit Feather form factor in recent years, many third-party manufacturers have developed Feather-compatible boards, such as the Penguino Feather 4260, Giant board, OrangeCrab, and Feather-S2. Mexico-based Electronic Cats has come up with their...

Continue Reading
2.407
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives