Dadamachines Doppler is a new FPGA Platform for Open Music Hardware
https://www.electronics-lab.com/dadamachines-doppler-new-fpga-platform-open-music-hardware/
The new doppler board promises to meld the power of FPGA brains with microcontrollers and the accessibility of environments like Arduino. And the founder is so confident that could lead to new stuff, he’s making a “label” to help share your ideas. doppler is a small, 39EUR development board packing both an ARM microcontroller and […]
Minimal ATSAMD21 Computer is Arduino compatible
https://www.electronics-lab.com/minimal-atsamd21-computer-arduino-compatible/
This project describes how to build an ATSAMD21-based computer on a prototyping board using the minimum number of components, and program it from the Arduino IDE. David Johnson-Davies writes: I give two alternative methods of uploading a bootloader to the bare ATSAMD21 chip using the Arduino IDE. You can then program the minimal ATSAMD21 computer […]
8 Channel Optically Isolated I/O Shield for Arduino Nano
https://www.electronics-lab.com/8-channel-optically-isolated-o-shield-arduino-nano/
This shield enables you to interface many different devices to Arduino Nano using optically isolated inputs/outputs. The circuit consists of 4 Input channels and 4 Output channels and all 8 I/O lines are optically isolated. This project can help in various industrial applications where EMI noise and high voltage lines can damage the Arduino Nano […]
Arduino IoT Cloud Public Beta Version brings new opportunities
https://www.electronics-lab.com/how-arduino-iot-cloud-public-beta-version-brings-the-ray-of-hope/
Arduino has never ceased to impress everyone, and recently have launched the Beta version of their IoT cloud that brings in more awesomeness. The beta version brings autonomy to the Arduino and Makers ecosystem. Now, the connection between an Arduino board and cloud is no more dependent upon services like “ThingSpeak”, “Thinger.io” and several others. […]
uChip: Arduino Zero compatible in a narrow DIP-16 package!
https://www.electronics-lab.com/uchip-arduino-zero-compatible-narrow-dip-16-package/
A very small narrow-DIP-sized, Arduino Zero compatible USB dev board (OTG enabled), with integrated buck and boost power supplies! The Arduino ecosystem provides an invaluable resource of hardware and software, which allows quick development of a myriad of projects thanks to its fruitful community. Several Arduino-compatible boards came out in the past years, to increase […]
NERO-SP1 – Arduino UNO Compatible Board
https://www.electronics-lab.com/nero-sp1-arduino-uno-compatible-board/
ATmega328, FT231X NerO – MCU 8-Bit AVR Embedded Evaluation Board. This is the NERO-SP1, an Arduino compatible module with short shield pin. This Nero module is a reference design for an energy efficient Arduino UNO compatible board based on the ATMEGA328 with the FTDI FT231X USB- UART delivers 5V at a full 1A without overheating. […]
TEA5767 – FM Receiver Module
https://www.electronics-lab.com/tea5767-fm-receiver-module/
Based on the chip of the Philips TEA5767, this tiny module allows to realize, with the addition of very few external components, a stereo FM radio with reception frequency from 87.6 MHz to 108 MHz .. Used in MP3 players, MP4, mobile phones, etc. The single-chip TEA5767/68 is a miniature, digitally tuned radio IC that […]
Zero BZ1 Arduino Board comes with SD and LiPo charger
https://www.electronics-lab.com/zero-bz1-arduino-board-comes-sd-lipo-charger/
One of the most beautiful things about using the Arduino ecosystem is its stackable ideology, where you can easily add new functionality to almost any Arduino board and make the bare metal Arduino board look so powerful. Hackers can decide to add an IoT add-on, SD storage add-on, or even a display add-on to a plain […]
3.6A Bidirectional DC Motor Driver Shield for Arduino Nano
https://www.electronics-lab.com/3-6a-bidirectional-dc-motor-driver-shield-arduino-nano/
This is another Arduino Nano shield which can drive a Brushed DC Motor in both directions with PWM signal for speed control and it also includes current trip feature. Project is based on DRV8870 IC which can handle current up to 3.6Amps, The shield also includes an IR sensor and trimmer potentiometer. Trimmer Pot helps […]
Arduino MKR Motor Carrier
https://www.electronics-lab.com/arduino-mkr-motor-carrier/
Want to connect several motors and sensors to your mechatronic project? The Arduino MKR Motor Carrier is the perfect companion for Arduino MKR boards as it will allow you to rapidly prototyping and build your projects. The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier […]