Round LCD Board based on Raspberry Pi’s RP2040 Microcontroller
https://www.electronics-lab.com/round-lcd-board-based-on-raspberry-pis-rp2040-microcontroller/
UK-based hardware developer Om Singh has launched a crowdfunding project built on two popular microcontrollers, RP2040 and ESP32. The RoundyPi, as the name suggests, is a Raspberry Pi’s in-house silicon tape-out RP2040 powered, compact and stylish LCD display of size 1.28-inches. RP2040 brings its distinctive characteristics of high performance, low cost, and ease of use […]
GoWired Multiprotocol Gateway With More Power and Versatility
https://www.electronics-lab.com/gowired-multiprotocol-gateway-with-more-power-and-versatility/
GoWired Multi-Protocol GateWay is an amplified version of GetWired Ethernet Gateway. It is furnished with enhanced power features and versatility geared towards providing improved solutions for wired automation applications. The board is designed to allow automation engineers and hobbyists to implement AI and ML protocols looking at the skyrocketing the duo has brought to the […]
Quantum Engineering’s Hackboard is a Windows 10 Pro SBC with Optional 4G or 5G connectivity
https://www.electronics-lab.com/quantum-engineerings-hackboard-is-a-windows-10-pro-sbc-with-optional-4g-or-5g-connectivity/
Single-board computers (SBCs) have gained a tremendous boost over the years. More and more powerful processors have made their way into the embedded computing market and this has caused the single board computers of today to become so powerful that they have almost the capability of modern-day PCs and tablets. Companies on the other hand […]
TIG Announces Bluetera II Open Source IoT Motion-Based Development Board
https://www.electronics-lab.com/tig-announces-bluetera-ii-open-source-iot-motion-based-development-board/
Tensor Iotera Group (TIG) has announced its new Bluetera II open source full-stack development board, which according to the company uses Google’s Protocol Buffer technology for motion-based IoT applications. TIG says that the Bluetera II is the second generation module. Bluetera II is built to fill the gap for an open source platform that meets the following […]
CortexProg is a Cortex-M Programmer and Debugger
https://www.electronics-lab.com/cortexprog-is-a-cortex-m-programmer-and-debugger/
The ARM Cortex family of 32-bit RISC-based processors has emerged as the leading processor core in embedded designs due to its efficient architecture, robust and scalable instruction set, and extensive base of development tools and software. Cortex-M MCUs has been one of the most used microcontrollers for embedded systems and they have seen applications in various […]
Top Funding Platforms For Hardware Based Projects
https://www.electronics-lab.com/top-funding-platforms-hardware-based-projects/
In the last few years, we have seen that the Makers’ Movement is growing quite strong, more makers, innovators, and hardware startups are beginning to come up. We saw back in 2015, the most famous hardware prototyping board “The Arduino” is now assembled in the USA as compared to it being manufactured only in Italy, this not only […]
XMotion All In One Controller for Robotics
https://www.electronics-lab.com/xmotion-one-controller-robotics/
If there is a motion, it must have XMotion. Recreating Arduino & interface circuits user focused. XMotion is Arduino Compatible all in one robot controller. Which designed specially for robotics, IOT and maker projects. It includes powerful Motor drivers, switching mode regulator, interface circuits and more. With protected features, it is all in one board […]
Tomu – An ARM board which fits inside your USB connector
https://www.electronics-lab.com/tomu-arm-board-fits-inside-usb-connector/
Tomu is a programmable computer that is so small that can fit entirely inside a computer’s USB port. It sticks out just a little bit, enough to allow you to press one of the two buttons on it’sy side. It also have two LED lights, to let you know what I’m up to. The project […]
iBlinds – Make Your Existing Blinds Intelligent
https://www.electronics-lab.com/iblinds-make-your-existing-blinds-intelligent/
Z-wave Alliance contest winner and Texas-based HAB Home Intelligence has launched a crowdfunding campaign on Kickstarter.com to bring iBlinds, a DIY home automation kit, to the market. The product will allow customers to make their existing window blinds “smart” and to control multiple devices with a touch of one button on a phone, tablet, PC […]