xTendLoRa mesh-capable LoRa data radio Supports AT commands & MODBUS
https://www.electronics-lab.com/xtendlora-mesh-capable-lora-data-radio-supports-at-commands-modbus/
A Crowdfund campaign is set to be launched soon for the XTendLoRa, which is a mesh-capable LoRa data radio with support for AT commands & MODBUS. “Whether you are designing an Internet of Things (IoT) product, constructing a smart home, rolling out a sensor network, developing a building automation solution, or just trying to make […]
CHUWI LarkBox World’s Smallest 4K Mini PC
https://www.electronics-lab.com/chuwi-larkbox-worlds-smallest-4k-mini-pc/
Ultra-small Size/Intel J4115 Processor/6GB RAM/128GB ROM/4K Video Output/Ultra-silence Cooling Fan Due to its super compact size, Larkbox is fantastic for a desk where space is scarce. What’s more, it can be taken anywhere in your bag, enabling you to work anywhere without the need to switch devices. To make this even easier, we made Larkbox […]
Power Meter gives accurate Measurement For energy Consumption of IoT devices
https://www.electronics-lab.com/power-meter-gives-accurate-measurement-energy-consumption-iot-devices/
In the world of today’s technology, the Internet of Things is very popular. We see that most of the devices used to create the IoT (Internet of Things) function on small batteries or energy harvesting. We find it quite hard measuring the amount of energy being consumed by these IoT devices due to the dynamic […]
I²CMini – A tiny USB to I²C bridge that is compatible with I²CDriver
https://www.electronics-lab.com/i%c2%b2cmini-tiny-usb-i%c2%b2c-bridge-compatible-i%c2%b2cdriver/
I²CMini is a USB to I²C bridge. It can drive and monitor I²C traffic and measures just 18 mm square. It has a micro USB connector, a Qwiic connector on the I²C side, and .1″ pins for a breadboard or pin header. I²CMini is 100% compatible with I²CDriver, and like I²CDriver (i2cdriver.com) it’s an easy-to-use, […]
The ultimate low-cost massive MIMO SDR, with up to 32×32 transmit/receive channels
https://www.electronics-lab.com/ultimate-low-cost-massive-mimo-sdr-32x32-transmit-receive-channels/
XYNX (pronounced ikz-sync) is being launched on Crowdsupply by Fairwaves. it is based on the success of the Octopack SDR (software-defined radio) and the feedback the firm received from the original Octopack users. It is designed for situations or use cases that involve large band of spectrum monitoring or massive MIMO system and it comes […]
PiJuice Zero – A Portable Project Platform for Every Raspberry Pi Zero
https://www.electronics-lab.com/pijuice-zero-portable-project-platform-every-raspberry-pi-zero/
PiJuice Zero is an Uninterruptable Power Supply (UPS) and project platform board, that can fit inside the Pi Zero case. When plugged into any source, the PiJuice Zero acts as an Uninterruptible Power Supply (UPS) using intelligent power management to keep your Raspberry Pi Zero going. PiJuice Zero will also stay charged, so you can […]
easySwitchBox – The long-range LoRa® wall switch
https://www.electronics-lab.com/easyswitchbox-long-range-lora-wall-switch/
easySwitchBox by easySensors is a long-range LoRa® wall switch powered by coin cells and the Arduino IDE. easySwitchBox enables you to remote control your appliances from long distance as easy as the push a a button. The easySwitchBox does one simple thing – it sends on\off signals to any relay, actuator, or other project. It […]
ScopeFun – Open Source All-in-One Instrumentation
https://www.electronics-lab.com/scopefun-open-source-one-instrumentation/
Five Benchtop Tools in One Open Source Device. ScopeFun in an open source, all-in-one instrumentation platform. It includes an oscilloscope, arbitrary waveform generator, spectrum analyzer, logic analyzer, and digital pattern generator. Hardware Hardware is built around Xilinx Artix-7 FPGA with an onboard RAM available for buffering samples (512 MB DDR3 SDRAM). All hardware settings are […]
SuperB – An open, Bee-compatible ESP32
https://www.electronics-lab.com/superb-open-bee-compatible-esp32/
SuperB is an open source, Bee–compatible ESP32 module for quickly and easily adding Wi-Fi and Bluetooth to your project. It combines the popularity of ESP32 with the XBee form factor to achieve an easy way of adding wireless connection to your board. It was originally build for use with Macchina M2 ODB2 scanner, check details […]
I²CDriver – An easy-to-use tool for controlling I²C devices
https://www.electronics-lab.com/i%c2%b2cdriver-easy-use-tool-controlling-i%c2%b2c-devices/
I²CDriver is an easy-to-use, open source tool for controlling I²C devices. It works with Windows, Mac, and Linux, and has a built-in color screen that shows a live “dashboard” of all the I²C activity. It uses a standard FTDI USB serial chip to talk to the PC, so no special drivers need to be installed. […]