Latest TySOM Kit Accelerates the Development of AI
https://www.electronics-lab.com/latest-tysom-kit-accelerates-development-ai/
Aldec’s TySOM-3A-ZU19EG embedded system development board, showcased at Embedded World 2019, supports the early co-development and co-verification of hardware and software. Aldec, Inc., a pioneer in mixed HDL language simulation and hardware-assisted verification for FPGA and ASIC designs, has launched the TySOM-3A-ZU19EG, to assist in the development of AI, Deep-learning Neural Network (DNN) and other […]
Catena 4710 – LoRaWAN based Feather-compatible FPGA board with RISC-V Core
https://www.electronics-lab.com/catena-4710-lorawan-based-feather-compatible-fpga-board-risc-v-core/
With the increase of high integration programmable chips, FPGAs are getting more and more popular. FPGAs has been traditionally known to be generally complex, but a new line of FPGAs have been showing some promise and that is believed that will help increase their popularity. Tiny FPGAs are the next promising thing, they are low-cost […]
Fomu Runs MicroPython And Fits Into Your USB Port
https://www.electronics-lab.com/fomu-runs-micropython-fits-usb-port/
When it comes to the world of Microcontrollers, FPGAs, DSPs, or basically anything related to embedded devices, we have traditionally been accustomed to something averagely big (in regards to this domain) and even created some standards like SBCs (Single Board Computers) to categorize devices. What if we could have development boards that goes beyond the […]
New IoT development board features FPGA for prototyping
https://www.electronics-lab.com/new-iot-development-board-features-fpga-prototyping/
The ARGUS BOARD is a newly developed, unique microcomputer board specializing in sensing. It offers high processing capability and a mounted FPGA that will support the development efforts of everyone from researchers to students working on sensing prototypes. At CES, THK will show prototype applications using the company’s ARGUS BOARD microcomputers for IoT and industrial applications. […]
Alchitry – FPGA development boards for hobbyists
https://www.electronics-lab.com/alchitry-fpga-development-boards-hobbyists/
Digital design refers to creating digital circuits. Digital circuits are in basically everything today and range from something as simple as a circuit that turns an LED on when a button is pressed to the complex processor in the device you are reading this on. Traditionally, these circuits are built by making ASICs (Application Specific […]
USB for Intel’s MX10 and SpiderSoM Modules
https://www.electronics-lab.com/usb-intels-mx10-spidersom-modules/
MX10 and SpiderSoM modules are outfitted with a USB device interface, applied with PIC16F1454 microcontroller (MCU). On the SoM side the MCU is connected to three interfaces: serial (if the other side is applied inside the FPGA), an I2C bus (connected to the module PMIC, charge controller, RTC and FPGA), and FPGA JTAG programming interface. […]
LimeNET Micro SDR Board Features Raspberry Pi CM3
https://www.electronics-lab.com/limenet-micro-sdr-board-features-raspberry-pi-cm3/
LimeNET Micro is an open spec, 125 x 65mm fully embedded SDR board, featuring the Raspberry Pi Compute Module 3, MAX10 FPGA, u-blox GNSS, RF transceiver, Ethernet with PoE, and optional enclosures. It is Lime’s first fully embedded SDR board. The LimeNET Micro will be available for order in Dec. 6, starting at $269, including […]
FLIR Boson Camera Frame Grabber using FPGA
https://www.electronics-lab.com/flir-boson-camera-frame-grabber-using-fpga/
Simple FPGA based PCB to capture thermal images from a FLIR Boson camera on to a microSD. The project’s sources are available on Github. by Greg Davill A small PCB designed to attach to the backside of the FLIR Boson Thermal Camera. The PCB facilitates configuration of the camera along with capturing data to an […]
DarkRISC-V Targets low-cost Xilinx Spartan-6 Family of FPGAs
https://www.electronics-lab.com/darkrisc-v-targets-low-cost-xilinx-spartan-6-family-of-fpgas/
Developed in the dark hours of the night, between 2 and 8 o’clock in the morning of August 19th by Marcelo Samsoniuk, the DarkRISC-V stack is an experimental open source implementation of the RISC-V standard targeting the low-cost Xilinx Spartan-6 family of FPGAs. Following a week of debugging, Samsoniuk has released the implementation to GitHub […]
Nuand’s Launches the BladeRF 2.0 Micro With FPGA Support
https://www.electronics-lab.com/nuands-launches-the-bladerf-2-0-micro-with-fpga-support/
Everyone believes the future is going to be bright and a lot are betting that smart devices of the future will have the ability to self-adapt to its environment and that’s why some are backing on Cognitive Radios which are Software Defined Radios with AI. Our world is becoming crowded with several smart devices, and the […]