Heltec T096 Combines nRF52840, LoRa, and GNSS for Mesh Networks
https://www.electronics-lab.com/heltec-t096-combines-nrf52840-lora-and-gnss-for-mesh-networks/
Compact LoRa mesh node supports Meshtastic, GNSS tracking, Bluetooth Mesh, and low-power wireless communication with Arduino and MicroPython support.
Romu is a Tiny RP2354A USB Development Board for Embedded Projects
https://www.electronics-lab.com/romu-is-a-tiny-rp2354a-usb-development-board-for-embedded-projects/
A keychain-sized USB Type-A board built around the RP2354A MCU with MicroPython support, RGB LED, capacitive touch input, and debugging features.
Waveshare RP2350-One USB Development Board Powered by Raspberry Pi RP2350A MCU
https://www.electronics-lab.com/waveshare-rp2350-one-usb-development-board-powered-by-raspberry-pi-rp2350a-mcu/
A compact development board featuring the RP2350A microcontroller with ARM Cortex-M33 and RISC-V cores, onboard flash, USB Type-A plug, GPIO, and multiple communication interfaces.
ManT1S Module Enables T1S Single-Pair Ethernet for ESP32 Automation
https://www.electronics-lab.com/mant1s-module-enables-t1s-single-pair-ethernet-for-esp32-automation/
Silicognition’s ManT1S board delivers 10BASE-T1S networking and ESP32 processing for streamlined wiring in robotics, automation, and distributed IoT systems.
Waveshare RP2350B-Plus-W – A RP2350B development board wiht Wi-Fi and Bluetooth
https://www.electronics-lab.com/waveshare-rp2350b-plus-w-a-rp2350b-development-board-wiht-wi-fi-and-bluetooth/
Compact RP2350B development board features dual-core ARM/RISC-V, Wi-Fi 4, Bluetooth 5.2, 16MB Flash, and all GPIO access.
Waveshare RP2350-Relay-6CH: Industrial 6-Channel Relay Module with RS485 & Pico HAT Support
https://www.electronics-lab.com/waveshare-rp2350-relay-6ch-industrial-6-channel-relay-module-with-rs485-pico-hat-support/
The Waveshare RP2350-Relay-6CH is a 6-channel relay module with RP2350B MCU, RS485, isolation features, USB-C, and DIN-rail case, supporting up to 250VAC/30VDC 10A per relay.
Shrike – A Low-cost FPGA board with RP2040 MCU, Renesas ForgeFPGA and open-source tools
https://www.electronics-lab.com/shrike-a-low-cost-fpga-board-with-rp2040-mcu-renesas-forgefpga-and-open-source-tools/
The Shrike is a compact, low-cost, open-source FPGA development board designed by an Indian company, Vicharak, for educational, experimental, and embedded development. It combines a Renesas ForgeFPGA SLG47910V with a Raspberry Pi RP2040 microcontroller, thanks to a six-bit high-speed bridge. The development board is breadboard-friendly and gets powered/programmed via USB Type-C. The board also offers […]
Adafruit Sparkle Motion – ESP32-S3-Based LED Controller with I2S Mic, 4 Outputs, USB-C PD, and WLED/xLights Support
https://www.electronics-lab.com/adafruit-sparkle-motion-esp32-s3-based-led-controller-with-i2s-mic-4-outputs-usb-c-pd-and-wled-xlights-support/
The Adafruit Sparkle Motion with wFL Antenna is an ESP32-based board designed for WLED and xLights smart LED projects. It uses the classic dual-core 240MHz Tensilica ESP32 module with 4MB flash, supporting Wi-Fi, Bluetooth LE, and Bluetooth Classic. The board is optimized for compatibility with WLED and supports various LED configurations from small wearable setups […]
ESP32 Display Module Comes with 7-Inch IPS Screen, Capacitive Touch, and Arduino Support
https://www.electronics-lab.com/esp32-display-module-comes-with-7-inch-ips-screen-capacitive-touch-and-arduino-support/
The JC1060P470 is a powerful ESP32 7-inch TFT display module designed by GUITION for embedded applications, featuring a high-resolution 1024×600 IPS screen with 16.7M colour support and a capacitive touch panel for intuitive interaction. It is powered by a dual-controller setup: the main controller ESP32-P4NRW32 (a dual-core MCU) and the secondary ESP32-C6-MINI-1U-N4, which provides integrated […]
Pimoroni Presto is 4-inch Desktop Touch Display Development Board with RP2350 MCU and WiFi, RGB LEDs, Qwiic Expansion and More
https://www.electronics-lab.com/pimoroni-presto-is-4-inch-desktop-touch-display-development-board-with-rp2350-mcu-and-wifi-rgb-leds-qwiic-expansion-and-more/
The Pimoroni Presto is a compact 4-inch wireless desktop touch display development board built around the Raspberry Pi RP2350 MCU, which uses the Raspberry Pi RM2 wireless module, for both WiFi 4 and Bluetooth connectivity. Designed for desktop use, it features a square 480×480 capacitive touchscreen, 8MB PSRAM, 16MB QSPI flash, a microSD card slot, […]