EA W128064-XALG Compact Low-Power OLED Display
https://www.electronics-lab.com/ea-w128064-xalg-compact-low-power-oled-display/
Display Visions’ 0.84″ 96 x 16 OLED display is ideal for small, compact low-power applications Display Visions’ yellow OLEDs come packaged as a complete module that includes all required logic at only a 1.34 mm thickness. With a built-in controller, 2000:1 contrast ratio, 10 µs response time, viewing angles greater than 160°, and the ability to withstand […]
Aledia – Pioneering nanowire microLED’s on 300 mm Wafers
https://www.electronics-lab.com/aledia-pioneering-nanowire-microleds-on-300-mm-wafers/
We talk a lot about downsizing. It is, and always will be on the top priority list of the world of electronics. Without smaller sizes, we would never have gotten to this state, where our projects can be housed in a small PCB and ran on an ATTiny mcu. It is one of the most […]
UOLED-128-G2 – 1.5″ Smart micro OLED Display
https://www.electronics-lab.com/uoled-128-g2-1-5-smart-micro-oled-display/
The uOLED-128G2 is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embedded GOLDELOX graphics processor that delivers ‘stand-alone’ functionality to any project. Powerful graphics, text, image, animation and countless more features are built inside the GOLDELOX chip. The module is designed to […]
Digital Pressure Gauge 0 to 10kPa (0 to 1.75 psi) with OLED display
https://www.electronics-lab.com/digital-pressure-gauge-0-to-10kpa-0-to-1-75-psi-with-oled-display/
The project presented here is a Digital Pressure Gauge using an OLED display. The measuring range of this unit is 0 to 10kPa (0 to 1.75 psi). Additional this compact open-source hardware is Arduino compatible. This board can be used for measuring low pressure up to 1.75psi with great accuracy. The board contains an MPXV5010DP […]
Current Meter Using 0.96″ OLED Display
https://www.electronics-lab.com/current-meter-using-0-96%e2%80%b3-oled-display/
This project provides an economical and precise solution for DC current sensing and display on an OLED display. This board uses the ACS715T-20A hall effect-based linear current sensor chip, 0.96 Inch I2C OLED Display and Atmega328 microcontroller chip. It is an Arduino compatible open-source hardware that can be modified to your requirements. It is easily […]
New OLED architecture has 10,000 PPI resolution
https://www.electronics-lab.com/new-oled-architecture-has-10000-ppi-resolution/
Researchers at Samsung in Korea and Stanford University in the US have developed and patented a new architecture for OLED displays with resolution up to 10,000 pixels per inch (PPI). by Nick Flaherty @ eenewsembedded.com The design uses adapted an electrode ultra-thin solar panels with a base layer of reflective metal with nanoscale corrugations, called […]
DIY: Build a controller with a knob that can easily change the volume of any app on your PC
https://www.electronics-lab.com/diy-build-controller-knob-can-easily-change-volume-app-pc/
Ruben Henares has designed a Maxmix controller with a stylist knob that could save us the stress of having to always go through the menus and on-screen sliders to change the volume of individual apps on our PCs. The knob on the controller takes an input from the encoder/button to display the desired app where […]
Use an ATtiny85 to Build Your Own Electronic Compass
https://www.electronics-lab.com/use-attiny85-build-electronic-compass/
At the very heart of any embedded electronics system is a microcontroller. While the ATtiny series of microcontrollers have been around for a while now, they recently started getting noticed on a very high scale as DIYers and professional designers now use them in various projects which ordinarily would have featured a much bigger MCU […]
A new ATMega328p board with onboard OLED Display
https://www.electronics-lab.com/new-atmega328p-board-onboard-oled-display/
Made popular by the Arduino based on it, the Atmega328p has become one of the most popular microcontrollers around, thanks to the ease with which it can be programmed using the Arduino IDE. Either as a direct clone of Arduino boards like Uno and Nano or as a new board with an entirely different form […]
MI/O- ATmega328 Based Smart Watch By Markus Bindhammer
https://www.electronics-lab.com/mi-o-atmega328-based-smart-watch-markus-bindhammer/
Wristwatches are an integral part of our dressing, and also help us plan our day to day activities, making sure we don’t miss meetings, gym, exams, parties etc. These days, a good looking watch speaks volumes about the wearer, because it’s one of the most noticeable accessories a person wears. We have seen smartwatches taking […]