Grapple Probe – An Isolated USB CMSIS-DAP Debug Probe with UART and I2C
https://www.electronics-lab.com/grapple-probe-an-isolated-usb-cmsis-dap-debug-probe-with-uart-and-i2c/
Built for embedded development, the probe combines CMSIS-DAP debugging with UART and I2C interfaces while electrically isolating the target from the host computer.
CHC5 is an Open Modular Camera System with Interchangeable Sensors and Lens Mounts
https://www.electronics-lab.com/chc5-is-an-open-modular-camera-system-with-interchangeable-sensors-and-lens-mounts/
CircuitValley’s CHC5 is a modular machine-vision camera with interchangeable sensors and lens mounts, FPGA-based ISP processing, USB 3.0, GigE Vision, and HDMI outputs.
ESP32-E22 Gets Wi-Fi 6E Certification and Linux Drivers
https://www.electronics-lab.com/esp32-e22-gets-wi-fi-6e-certification-and-linux-drivers/
Espressif's new M.2 Radio Co-Processor has officially received certification from the Wi-Fi Alliance, accompanied by an initial release of open-source software support.
RP2350B BellsNWhistles Board Adds Onboard Debugger and HDMI
https://www.electronics-lab.com/rp2350b-bellsnwhistles-board-adds-onboard-debugger-and-hdmi/
Designed for rapid prototyping, this open-source platform features dual USB-C ports, MicroSD storage, optional PSRAM, and a built-in RP2040 to eliminate external probes.
Modos Flow is a 13.3-inch Open-Source 13.3-inch 60Hz E-Paper Monitor
https://www.electronics-lab.com/modos-flow-is-a-13-3-inch-open-source-13-3-inch-60hz-e-paper-monitor/
Designed for reading, writing, and development, this USB-C e-paper monitor is suitable for daily productivity.
Modos Flow – A 60Hz E-Ink Monitor Powered by AMD Zynq 7000 SoC
https://www.electronics-lab.com/modos-flow-a-60hz-e-ink-monitor-powered-by-amd-zynq-7000-soc/
This open-hardware screen leverages advanced FPGA capabilities to deliver fast refresh rates over USB Type-C, providing a responsive environment for deep focus tasks
bUniProbe – Open Source Wireless Multi-Protocol Hardware Debugger Tool
https://www.electronics-lab.com/buniprobe-open-source-wireless-multi-protocol-hardware-debugger-tool/
A compact Wi-Fi-enabled debugger whcih combining SPI, I²C, UART, CAN, GPIO, ADC, and DAC into one browser-accessible platform — no drivers or software installation required.
CERN Releases Open-Source KiCad Component Library with 17,000 Parts
https://www.electronics-lab.com/cern-releases-open-source-kicad-component-library-with-17000-parts/
Hardware developers can now access CERN’s free KiCad component library with 17,000 verified PCB symbols and footprints for KiCad 9.x.
bPiShift – An Open-Source 28-PIN Bidirectional Logic Level Shifter For Raspberry Pi
https://www.electronics-lab.com/bpishift-an-open-source-28-pin-bidirectional-logic-level-shifter-for-raspberry-pi/
bPiShift is a snap-on, open-source 28-pin bidirectional logic level shifter for Raspberry Pi, enabling 3.3V to 5V interfacing without extra wiring.
Cadence and Skywater Detail Next Open Multi-Project Wafer Shuttle Program
https://www.electronics-lab.com/cadence-and-skywater-detail-next-open-multi-project-wafer-shuttle-program/
The program offers cost-effective access to the 130 nm CMOS process, enabling students, researchers, and start-ups to tapeout complex mixed-signal designs using commercial-grade and open-source tools.