CM5-NANO-B: Raspberry Pi CM5 Carrier Board with USB 3.2, HDMI, PCIe, and Gigabit Ethernet
https://www.electronics-lab.com/cm5-nano-b-raspberry-pi-cm5-carrier-board-with-usb-3-2-hdmi-pcie-and-gigabit-ethernet/
The CM5-NANO-B is a CM5 carrier board designed for the Raspberry Pi Compute Module 5 (CM5), integrating essential I/O interfaces in a compact form factor. It features a USB 3.2 Gen1 port, HDMI output, an audio interface, and an Ethernet port, making it suitable for embedded applications that require display and connectivity options. The board […]
EDATEC ED-AIC3100: 12MP Industrial Smart Camera with Raspberry Pi CM5 and Broadcom BCM2712 SoC
https://www.electronics-lab.com/edatec-ed-aic3100-12mp-industrial-smart-camera-with-raspberry-pi-cm5-and-broadcom-bcm2712-soc/
EDATEC has introduced the ED-AIC3100, a 12MP industrial smart camera based on the Raspberry Pi CM5. It features a Broadcom BCM2712 quad-core Cortex-A78 (ARM v8) 64-bit SoC running at 2.4GHz. The device supports up to 8GB LPDDR4 RAM and 64GB eMMC storage, with configurable options including 2GB, 4GB, 8GB, and 16GB RAM, along with 16GB, […]
FlashMyPico: Web-Based Firmware Flashing for Raspberry Pi Pico & RP2350 Microcontrollers
https://www.electronics-lab.com/flashmypico-web-based-firmware-flashing-for-raspberry-pi-pico-rp2350-microcontrollers/
FlashMyPico website works as an application programming interface, an easy-to-use online tool that allows easy integration with your existing build system. This website allows users to write C/C++ codes, build the firmware, and flash it to their Raspberry Pi Pico, Pico W, Pico 2, or Pico 2 W directly from a web browser instead of […]
Seco Pi Vision 10.1 CM5 comes with a 10.1-inch industrial display system
https://www.electronics-lab.com/seco-pi-vision-10-1-cm5-comes-with-a-10-1-inch-industrial-display-system/
Seco has released an industrial human-machine interface solution, the Seco Pi Vision 10.1 CM5, which was showcased at the embedded world 2025 in Nuremberg, Germany. The hardware features a 10.1-inch industrial display system, powered by the Raspberry Pi Compute Module 5, primarily designed for industrial IoT, automation, and edge computing applications. As mentioned earlier, the […]
Adafruit Metro RP2350: RP2350-Based Arduino-Compatible Board with Dual Cortex-M33, TPS563201 Buck Converter, and HSTX Expansion
https://www.electronics-lab.com/adafruit-metro-rp2350-rp2350-based-arduino-compatible-board-with-dual-cortex-m33-tps563201-buck-converter-and-hstx-expansion/
The Adafruit Metro RP2350 is an Arduino-compatible development board based on the Raspberry Pi RP2350 microcontroller. It features a dual-core ARM Cortex-M33 processor running at 150MHz, 528KB of RAM, and 16MB of QSPI flash for program storage. The board operates at 3.3V logic and includes a 5V buck converter (TPS563201) that accepts a 4.5V to […]
Pineboards Raspberry Pi CM4/CM5 carrier boards brings PoE+ and M.2 NVMe support to Raspberry Pi CM5
https://www.electronics-lab.com/pineboards-raspberry-pi-cm4-cm5-carrier-boards-brings-poe-and-m-2-nvme-support-to-raspberry-pi-cm5/
Pineboards has recently launched the Raspberry Pi CM4/CM5 carrier boards (Modulo4, Modulo5 Basic, and Modulo5 IO PoE+) designed to adapt Raspberry Pi Compute Modules (CM4 and CM5) to the Raspberry Pi’s form factor while maintaining compatibility with PCIe HATs, cases, and cooling solutions. The Modulo5 IO PoE+ variant integrates PoE+ for network-powered operation. These boards feature […]
WeAct RP2350B Core Board with USB Type-C, 48 GPIOs, QSPI Flash Support, and Multiple I/O Interfaces
https://www.electronics-lab.com/weact-rp2350b-core-board-with-usb-type-c-48-gpios-qspi-flash-support-and-multiple-i-o-interfaces/
WeAct RP2350B Core USB Type-C Board is a compact development board built around the Raspberry Pi RP2350B microcontroller. It features two 30-pin headers, providing access to all 48 GPIO pins, making it suitable for embedded systems and hardware development. The RP2350B supports Arm and RISC-V architectures, integrating a dual-core Cortex-M33 processor and a dual-core Hazard3 […]
ARK Pi6X Flight Controller Carrier Board with Raspberry Pi CM4 and ARKV6X (STM32H743) for UAV Applications
https://www.electronics-lab.com/ark-pi6x-flight-controller-carrier-board-with-raspberry-pi-cm4-and-arkv6x-stm32h743-for-uav-applications/
ARK Electronics has introduced the ARK Pi6X Flight Controller Carrier Board for UAVs and robotics. It integrates the ARKV6X flight controller, a PAB power module, and a 4-in-1 ESC on a single board, running PX4 Autopilot firmware. Designed for compatibility with the Raspberry Pi CM4, it supports ARK flow optical flow sensors to simplify subsystem […]
Graperain G3568: A Raspberry Pi look-alike single-board computer
https://www.electronics-lab.com/graperain-g3568-a-raspberry-pi-look-alike-single-board-computer/
Shenzhen Graperain Technology has introduced a Raspberry Pi look-alike G3568 single-board computer that features the most cost-effective quad-core system-on-chip, designed for a range of applications including smart homes, aerospace, security, healthcare, and industrial sectors. The device is built on the Rockchip RK3568 system-on-chip, which integrates an Arm Cortex-A55 processor, a Mali-G52 graphics unit, and a 1TOPS […]
Raspberry Pi-based industrial PCs: A Cost-Effective Option
https://www.electronics-lab.com/raspberry-pi-based-industrial-pcs-a-cost-effective-option/
Introduction Industrial PCs (IPCs) are an essential part of industrial applications such as automation of certain processes and HMI. The problem with traditional industrial PCs is that they are expensive and rigid. This limits the accessibility and customizability of traditional industrial PCs. But, today because of Raspberry Pi-based industrial PCs, IPCs are becoming a more […]