Meet the STM32 “Black Pill” Development Board
https://www.electronics-lab.com/meet-stm32-black-pill-development-board/
After playing second (maybe third?) fiddle for a while to a range of maker-friendly boards from Arduino and others, STMicro finally got it right with the STM32F103C8T6 Arm Cortex-M3 microcontroller-based “BluePill” development board which can be programmed using the Arduino IDE. As all good hardware requires, a new version of the board which is being […]
FAN6390 highly integrated secondary-side adaptive USB Type-C charging controller with USB-PD
https://www.electronics-lab.com/fan6390-highly-integrated-secondary-side-adaptive-usb-type-c-charging-controller-usb-pd/
ON Semiconductors design reference of their FAN6390 USB Type-C charger. FAN6390MPX has line−up according to output nominal currents. The first step of system design needs to select a device. FAN6390MPX incorporates many valuable functions and some functions are only compatible withFAN604 series of ON Semiconductor. Therefore, it is strongly recommended to select one of FAN604 […]
STMicroelectronics TCPP01-M12 USB Type-C Port Protection
https://www.electronics-lab.com/stmicroelectronics-tcpp01-m12-usb-type-c-port-protection/
STMicroelectronics TCPP01-M12 USB Type-C Port Protection is a single-chip solution that facilitates the migration from USB legacy connectors type-A or type-B to USB Type-C connectors. This Type-C port protection features overvoltage protection on VBUS, adjustable up to 22 V, with external N-channel MOSFET. The TCPP01-M12 USB port protection includes an integrated charge pump to control the gate […]
RedBoard Artemis – Sparkfun’s New Bluetooth Enabled Artemis Module
https://www.electronics-lab.com/redboard-artemis-sparkfuns-new-bluetooth-enabled-artemis-module/
SparkFun‘s new DEV-15444 RedBoard Artemis has an Arduino Uno R3 footprint, 1M Flash/384 KB RAM, and a processor that uses less than 1mA of current at peak. This Artemis board includes a modern USB-C connector and a Qwiic connector that makes programming and I2C easy. This RedBoard is fully compatible with SparkFun’s Arduino core and […]
Power DUO Sink 200W USB-C PD Reference Design
https://www.electronics-lab.com/power-duo-sink-200w-usb-c-pd-reference-design/
The Power DUO Sink 200W USB-C PD Reference Design is a complete USB PD Sink reference design that allows users to select their USB PD sink voltage. This USB Powe rDelivery (PD) reference design will allow users to implement a system that requires more than 100W to operate at, while also highlighting the industries lowest […]
WarpDrive: High-Speed Portable SSD 1TB or 2TB
https://www.electronics-lab.com/warpdrive-high-speed-portable-ssd-1tb-2tb/
Even with the advent of several file-sharing platforms and the proliferation of internet access to enable their use, the “old” regular way of moving a file from one place to the other via USB drives is still in vogue. Especially for large files like the video and picture contents which creatives need to move around […]
OtterPill Is a Nano-Compatible STM32 Board with USB-PD
https://www.electronics-lab.com/otterpill-nano-compatible-stm32-board-usb-pd/
STM32 was one of the names that were almost driven into oblivion, no thanks to the Arduino Revolution, but the name was brought back into the limelight when the STM32 Blue Pill was released. With its compatibility with the Arduino IDE via the STM32duino support package and its breadboard friendly form factor, it was a […]
USB-PD Stand-alone Adapter Board from Oxplot
https://www.electronics-lab.com/usb-pd-stand-alone-adapter-board-oxplot/
Modern devices are quickly switching to USB-C power adapters, gradually fading out USB-A, and USB-B adapters. USB’s Power Delivery (USB-PD) protocol enables the supplies to be flexible enough to handle charging (or powering) devices ranging from mobile phones to laptops. There are many high quality 90-100 Watt USB-C power adapters available. But unfortunately, there are many […]
Display Adapter For HDMI To Type-C With DP And PD Function
https://www.electronics-lab.com/display-adapter-hdmi-type-c-dp-pd-function/
Main features Operating Voltage: 5V Output Voltage: 3.3V Power Supply: USB Type-A to DC 5.5mm Main Chip: lontium LT6711A This adapter is designed for: DM-DevKit-AR0701 This adapter can be used with HDMI interface computers, ipads, game consoles and other devices. The adapter is on sale for $79.99 on www.displaymodule.com
World’s smallest and most affordable 65W GaN Adapter for Laptops and Mobile Devices
https://www.electronics-lab.com/worlds-smallest-affordable-65w-gan-adapter-laptops-mobile-devices/
Though the sizes of laptops and mobile phones have become smaller and lighter over the years, that of power adapters have pretty much remained the same. They are still the same device we have always known them to be; bulky, messy and hard-to-carry-around. But the new GaNtechnology seeks to bring a revolution in the world […]