Converting Wi-Fi signals to electricity with new 2-D materials
https://www.electronics-lab.com/converting-wi-fi-signals-electricity-new-2-d-materials/
Device made from flexible, inexpensive materials could power large-area electronics, wearables, medical devices, and more. by Rob Matheson | MIT News Office Imagine a world where smartphones, laptops, wearables, and other electronics are powered without batteries. Researchers from MIT and elsewhere have taken a step in that direction, with the first fully flexible device that […]
Calypso Wi-Fi Certified Radio Module for Secure Industrial IoT Solutions
https://www.electronics-lab.com/calypso-wi-fi-certified-radio-module-secure-industrial-iot-solutions/
The Calypso Wi-Fi Module is offered in 19 × 27.5 × 4 mm dimensions and can be operated in -40 to +85°C temperature range. It supports IPv4, IPv6 and common network applications like SNTP, DHCP, MQTT, mDNS, and HTTP(S). The module features AT command interface that enables easy expansion of an embedded system. It comes […]
Wi-Fi Stepper motor Controller
https://www.electronics-lab.com/wi-fi-stepper-motor-controller/
Control over Wifi and enable IoT interface for any stepper motor all the way up to 85V and 10A rms. Wi-Fi Stepper is a feature-packed, easy-to-use, stepper motor controller accessible over Wi-Fi. It can handle small to big stepper motors under high current. You can send crypto-secured commands over Wi-Fi from a computer, phone, or […]
Beetle ESP32 Microcontroller
https://www.electronics-lab.com/beetle-esp32-microcontroller/
Is FireBeetle-ESP32 too big for your projects? Why not try our newly launched Beetle-ESP32. This Beetle-ESP32 Microcontroller of 1.38”×1.34”small size is a simplified version of FireBeetle-ESP32 and specially designed for electronic engineering fans and DIY lovers. It is equipped with 4 analog ports, 4 digital ports, UART and I2C interfaces, which would be a perfect […]
WT8266-S1 WiFi Module Based on ESP8266
https://www.electronics-lab.com/wt8266-s1-wifi-module-based-esp8266/
WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc. The module’s core processor arduino ESP8266 integrates an enhanced version of Tensilica’s L106 Diamond series 32-bit […]
AVR-IoT WG development board
https://www.electronics-lab.com/avr-iot-wg-development-board/
Microchip released a new IoT Development board, the AVR-IoT WG with part number: AC164160 The AVR-IoT WG development board combines a powerful 8-bit ATmega4808 MCU, an ATECC608A CryptoAuthentication™ secure element IC and the fully certified ATWINC1510 Wi-Fi® network controller – which provides the most simple and effective way to connect your embedded application to Google’s […]
ESP32-S Wi-Fi+BT SoC Module (IPEX block output)
https://www.electronics-lab.com/esp32-s-wi-fibt-soc-module-ipex-block-output/
Esp32-S has a highly competitive package size and ultra-low power technology. Esp32-S can be widely used in various of networking, for home automation, industrial wireless control, baby monitors, wearable electronics products, wireless position sensing devices, wireless positioning system signals and other networking applications. Esp32-S is packaged in SMD,through the standard SMT equipment to achieve rapid production […]
The New Air602 WiFi Module, a Cheap Module Designed for IoT Applications
https://www.electronics-lab.com/the-new-air602-wifi-module-a-cheap-module-designed-for-iot-applications/
The ESP8266 had been in the tech scene for over four years now and has seen various competitors like the RTL8710 or, more recently, the RDA5981. But none of them has really been able to knock off the ESP8266 from its throne. The ESP8266 is seen by most as being “good enough.” So the need […]
Getting Started with the NodeMCU (ESP8266 Based Development Board)
https://www.electronics-lab.com/getting-started-with-the-nodemcu-esp8266-based-development-board/
As the popularity of Arduino boards increased, the demand for boards which comes embedded with some of the add-ons used with the Arduino increased. One of the most popular add-ons were the WiFi modules which are used to connect Arduino boards to the internet. Several boards were released by different manufacturers which used the Arduino […]
Silicon Labs’ Wireless Xpress Modules help develop and run IoT applications in one day
https://www.electronics-lab.com/silicon-labs-wireless-xpress-modules-help-develop-and-run-iot-applications-in-one-day/
Silicon Labs (NASDAQ: SLAB) offers a new Wireless Xpress solution to help developers get IoT applications connected and running in a day, with no software development necessary. Silicon Labs’ Wireless Xpress provides a configuration-based development experience with everything developers need including certified Bluetooth® 5 Low Energy (LE) and Wi-Fi® modules, integrated protocol stacks and easy-to-use […]