The WiFi 5 and Bluetooth 5 Board Now Available – Ivy5661 IoT Board
https://www.electronics-lab.com/wifi-5-bluetooth-5-board-now-available-ivy5661-iot-board/
A few months ago, in November 2018, we talked about the possibility of combining both WiFi 5 and Bluetooth 5 into one board. The UNISOC UWP5661 was a chip that could make that possible and the same chip powers the IVY5661 96Boards IoT board. At the time of posting about the IVY5661 board and the relatively unknown WiSoC chip […]
KEMET – Pyroelectric Infrared Sensors
https://www.electronics-lab.com/kemet-pyroelectric-infrared-sensors/
KEMET’s pyroelectric infrared sensors (PL series) are unobtrusive sensors that contribute to set designs. KEMET’s pyroelectric infrared sensors use the pyroelectric effect of ceramic by absorbing the infrared rays emitted from the human body. This detects the infrared signature naturally emitted by humans. It can detect infrared rays without using lenses. Due to the absence […]
AI Enabled RICO-3399: Power and Flexibility that Fits
https://www.electronics-lab.com/ai-enabled-rico-3399-power-flexibility-fits/
Pico-ITX Fanless Board with Rockchip ARM Dual-Core Cortex-A72 and Quad-Core Cortex-A53 AAEON, an award winning developer of AI hardware and a leader in industrial embedded solutions, releases the RICO-3399, a powerful PICO-ITX single-board computer that is built for AI applications and high-resolution displays. It features the Rockchip RK3399 ARM hexa-core processor, 4K Ultra HD video […]
ACEINNA Launches Industry’s First High Accuracy Current Sensors based on AMR Technology
https://www.electronics-lab.com/aceinna-launches-industrys-first-high-accuracy-current-sensors-based-amr-technology/
ACEINNA today announced its new MCx1101 family of ±5A, ±20A, and ±50A Current Sensors for industrial and power supply applications. The first high accuracy wide bandwidth AMR-based current sensors on the market, units and evaluation boards are available now for sampling and volume shipments. Our new integrated, AMR based Current Sensor family provides the best […]
Digital 16bit Serial Output Type Color Sensor IC – BH1749NUC
https://www.electronics-lab.com/digital-16bit-serial-output-type-color-sensor-ic-bh1749nuc/
ROHM’s BH1749NUC is a digital color sensor IC with I²C bus interface. This IC senses Red, Green, Blue (RGB) and Infrared and converts them to digital values. The high sensitivity, wide dynamic range and excellent Ircut characteristics make it possible for this IC to obtain the accurate illuminance and color temperature of ambient light. It […]
Renesas Electronics and Miromico Collaboration Brings to Market Enhanced LoRa® Module
https://www.electronics-lab.com/renesas-electronics-miromico-collaboration-brings-market-enhanced-lora-module/
New LoRa Module Enables Engineers to Access LoRaWAN™ Networking and Add Functionality Using Renesas Synergy Hardware and Software Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, and Miromico AG today announced their collaboration has produced the compact and low-power FMLR-61-x-RSS3 module based on LoRa® devices and wireless radio frequency technology. The new […]
Inforce 6560” Pico-ITX SBC features Snapdragon 660
https://www.electronics-lab.com/inforce-6560-pico-itx-sbc-features-snapdragon-660/
For a while now, the only Snapdragon 660 based SBC known to us is the Intrinsyc’s Mini-ITX form factor Open-Q 660 HDK, focusing on mobile device development. However, Inforce has launched its $220 “Inforce 6560” Pico-ITX SBC. This SBC runs Android 8 and Ubuntu on its octa-core Snapdragon 660 and enables stereoscopic depth sensing through […]
Texas Instruments LMR14010A Step-Down Converters
https://www.electronics-lab.com/texas-instruments-lmr14010a-step-converters/
Texas Instruments LMR14010A Step-Down Converters are the Pulse Width Modulation (PWM) DC-to-DC buck regulators with a wide input voltage ranging from 4V to 40V. These converters operate at a fixed frequency of 0.7MHz, allowing the use of small external components while minimizing output ripple voltage. The device has built-in protection features such as pulse-by-pulse current limit, thermal […]
Converting Wi-Fi signals to electricity with new 2-D materials
https://www.electronics-lab.com/converting-wi-fi-signals-electricity-new-2-d-materials/
Device made from flexible, inexpensive materials could power large-area electronics, wearables, medical devices, and more. by Rob Matheson | MIT News Office Imagine a world where smartphones, laptops, wearables, and other electronics are powered without batteries. Researchers from MIT and elsewhere have taken a step in that direction, with the first fully flexible device that […]
Voice Control Ready Pico-ITX i.MX8M Board for Embedded IoT Solutions
https://www.electronics-lab.com/voice-control-ready-pico-itx-mx8m-board-embedded-iot-solutions/
Estone technology is proud to announce the new addition to our pico-ITX embedded board family – EMB-2238, an NXP i.MX8M based single board computer. Building upon the success of our i.MX6 board series. The EMB-2238 is our first embedded board to integrated with hardware DSP specially designed for voice control applications, This Quad core ARM […]