BOMIST – Parts Inventory and BOM Management Software
https://www.electronics-lab.com/bomist-management-software-for-parts-inventory-monitoring/
We saw BOMIST first in late 2017. With a new version re-written from scratch being released by the end of 2020, we are revisiting it now. Although at first sight, we can spot quite a few similarities in regards to the UI, there is now more features (and very useful ones), better user experience and […]
Raspberry Pi CM4-based computer Makes Digital Signage simpler and more flexible
https://www.electronics-lab.com/raspberry-pi-cm4-based-computer-makes-digital-signage-simpler-and-more-flexible/
Sharp NEC Display Solutions has launched an embedded Linux signage computer, which has a large-format retrofit display system with digital signage capability called the MPi4 NEC. The MPi4 NEC MediaPlayer is based on the Raspberry Pi Compute Module 4. Application of the system includes; retail environments, passenger information, and quick service menu boards, etc. The Raspberry […]
Its Time To Upgrade To Arduboy FX RetroTech Gaming Console
https://www.electronics-lab.com/its-time-to-upgrade-to-arduboy-fx-retrotech-gaming-console/
After successful crowdfunding by the manufacturer of Arduboy that was subscribed more than 15x times, now we are looking at an upgraded version of the basic Arduboy gaming console. This product, Arduboy FX is built around the ATmega32u4 MCU same as the predecessor coming with 32KB flash memory, 2.5KB RAM, and 1KB EEPROM. When we […]
CLT03-1SC3 Digital Input Current Limiter
https://www.electronics-lab.com/clt03-1sc3-digital-input-current-limiter/
STMicroelectronics’ industrial digital input current limiter converts a 24 V digital industrial input to a 3 mA current STMicroelectronics’ CLT03-1SC3 is an industrial digital input current limiter that converts a 24 V digital industrial input to a 3 mA (typ) current for driving optical isolators or non-isolated LVTTL digital input termination. Features Type 1 and […]
Thin-Film Battery can attach to wearables and medical biosensors
https://www.electronics-lab.com/thin-film-battery-can-attach-to-wearables-and-medical-biosensors/
Molex’s battery can attach to wearables and medical biosensors and conform to a patient’s body for maximum comfort Molex’s thin-film battery is made of zinc and manganese dioxide, making disposal much easier for the end-user. Most developed countries have disposal regulations; this makes it costly and inconvenient for end-users to dispose of products with lithium […]
Littelfuse Introduces 1 Amp Fault Protected Solid State Relay with Integrated Current Limiting and Thermal Shutdown
https://www.electronics-lab.com/littelfuse-introduces-1-amp-fault-protected-solid-state-relay-with-integrated-current-limiting-and-thermal-shutdown/
Littelfuse, Inc. a global manufacturer of leading technologies in circuit protection, power control, and sensing, announced the CPC1561B Solid State Relay (SSR). The CPC1561B is the highest current (1 A, 60 V) normally-open SSR currently available on the market to integrate both current limiting and thermal shutdown circuits. The small, surface-mount CPC1561B SSR’s dual fault […]
ABLIC S-5701 B Series Magnetic Sensor ICs
https://www.electronics-lab.com/ablic-s-5701-b-series-magnetic-sensor-ics/
ABLIC S-5701 B Series Magnetic Sensor ICs offer a 1.7V to 5.5V power supply voltage, 160nA current consumption, and TSOT-23-3S package. These sensors operate with low current consumption and low voltage and are developed by tunnel magnetoresistance effect (TMR) technology and CMOS technology. The output voltage level changes when the IC detects the intensity level of […]
DFRobot Gravity: Speech Synthesis Module
https://www.electronics-lab.com/dfrobot-gravity-speech-synthesis-module/
DFRobot Gravity: Speech Synthesis Module converts lines of code into speech and supports both English and Chinese languages. This module operates from 3.3V to 5V power supply range, -40°C to 85°C operating temperature range, <50mA operating current, and 5%RH to 85%RH operating humidity range. The speech synthesis module features I2C and UART communication modes, gravity interface, […]
LUNA: Lets Your Capture And Analyze Traffic Between Hosts and USB devices
https://www.electronics-lab.com/luna-lets-your-capture-and-analyze-traffic-between-hosts-and-usb-devices/
Lately, we have seen several interesting projects up for crowdfunding that you can support and get rewards for as well. One such project coming soon is the LUNA hacking device that is nothing but a PCB with some integrated circuits and complex circuitry. With this new device, you can build, test, monitor, and experiment with […]
Arduino IDE Offers Support for the Raspberry Pi Pico
https://www.electronics-lab.com/arduino-ide-offers-support-for-the-raspberry-pi-pico/
Arduino recently announced their Arduino Nano RP2040 Connect board, which is a port of the latest Raspberry Pi Pico. Along with it, they’ve also decided to port the Arduino core, bringing the Arduino IDE, libraries, and more to the Raspberry Pi Pico. Even though the official port is yet to be available, Earle F. Philhower […]