DongshanPI-PicoW, A Tiny Arm Linux Board- A Review
https://www.electronics-lab.com/dongshanpi-picow-a-tiny-arm-linux-board-a-review/
The DongshanPI-PicoW is a tiny Arm Linux board that features four 12-pin headers in addition to the SSW101B USB WiFi chip. According to its name, the DongshanPI-PicoW board or module is intended to be an Arm Linux alternative to the Raspberry Pi Pico W. It features a SigmaStar SSD210 dual-core Cortex-A7 processor with 64MB RAM, […]
Oak Dev Tech’s Low-Power IcyBlue FPGA Feather Development Board
https://www.electronics-lab.com/oak-dev-techs-low-power-icyblue-fpga-feather-development-board/
With the help of this exclusive IcyBlue FPGA feather developed by OAK DEV TECH, it is simple to launch an FPGA development project using powerful and dependable ICE5LP4K FPGA from Lattice Semiconductor. The ICE5LP4K includes two hardware I2C and SPI blocks, a bright RGB LED, two user LEDS, and 22 user-accessible GPIO that can be […]
Magnet Based Rotary/Linear Encoder Module with Quadrature Output
https://www.electronics-lab.com/project/magnet-based-rotary-linear-encoder-module-with-quadrature-output/
This sensor module is a simple solution to build a magnet-based rotary encoder. The project is based on the AS5304 chip with integrated Hall elements for measuring linear or rotary motion using multi-pole magnetic strips or rings. This allows the usage of the module in applications where the Sensor IC cannot be mounted at the […]
Stepper Motor Based Rotary Encoder with Clock and Up/Down Direction Signal Output
https://www.electronics-lab.com/project/stepper-motor-based-rotary-encoder-with-clock-and-up-down-direction-signal-output/
This project enables the users to use a stepper motor as a rotary encoder for position control and Up/Down direction control. A bipolar stepper motor can be used as a rotary sensor as it generates two channel strings of pulses by turning the shaft. The circuit provides Step pulse and Up/Down Direction signals by rotating […]
Low-Cost Boost Converter 3.3V Input – 5V Output at 250mA
https://www.electronics-lab.com/project/low-cost-boost-converter-3-3v-input-5v-output-at-250ma/
This is a low-cost boost converter that converts a 3.3V input to 5V at 250mA load current. The LM2578A chip is used to build this project. The LM2578A is a switching regulator which can easily be set up for such DC-to-DC voltage conversion circuits as the buck, boost and inverting configurations. In this board, the […]
50V – 5A DC Brush Motor Driver – High Performance, High Reliability
https://www.electronics-lab.com/project/50v-5a-dc-brush-motor-driver-high-performance-high-reliability/
This is a powerful yet small-size and low-profile brushed DC motor drive system, with key features like adjustable constant current control, direction control, brake controls, Alert output, PWM for speed control, etc. The BD63150AFM chip is the heart of the project which is one H-bridge motor driver for DC brush motors. This board enables low […]
Variable Over-Current Detection Load Switch
https://www.electronics-lab.com/project/variable-over-current-detection-load-switch/
This over-current latch load switch provides over-current protection, thermal shutdown protection, soft-start function, and low power OFF function. The Overcurrent protection function is activated when the load is shorted. This protection function is effective in preventing damage due to sudden and unexpected incidents. It is also equipped with an error flag notification pin which indicates […]
55V – 3A Half-Bridge Power Driver Module
https://www.electronics-lab.com/project/55v-3a-half-bridge-power-driver-module/
This Half-bridge module provides current measurement and regulation features for various loads. The module can be used to drive solenoids, Relays, Valves, DC-DC converters, Brushed DC motors, or other loads. It can operate from a 5V to 55V supply voltage and can deliver up to 3A of output current (depending on ambient temperature). Cycle-by-cycle current […]
Texas Instruments bq25176M 800mA Linear Battery Charger
https://www.electronics-lab.com/texas-instruments-bq25176m-800ma-linear-battery-charger/
Texas Instruments bq25176M 800mA Linear Battery Charger is an integrated linear solar charger for 1-cell Li-Ion, LiFePO4, and Li-Polymer batteries with continual charge mode and battery tracking VINDPM. The device has a single power output that charges the battery. When the system load is placed in parallel with the battery, the charge current is shared […]
The EPIC-ADS7-PUC Offers Real-Time Computing in a Compact Chassis for Robotics, Automation, and Healthcare Imaging Solutions
https://www.electronics-lab.com/the-epic-ads7-puc-offers-real-time-computing-in-a-compact-chassis-for-robotics-automation-and-healthcare-imaging-solutions/
AAEON’s new EPIC-ADS7-PUC is the ultimate high-speed, high-powered solution compact system. Typically associated with powerful, feature-dense 4” single-board computers, AAEON has announced the reintroduction of system-level solutions to its EPIC product line with the new EPIC-ADS7-PUC. Powered by the 12th Generation Intel® Core™ processor platform with the capacity to support up to 65W CPUs, the […]