Qorvo QPL1818 75Ω CATV Amplifier featuring 15dB of gain
https://www.electronics-lab.com/qorvo-qpl1818-75%cf%89-catv-amplifier-featuring-15db-of-gain/
Qorvo QPL1818 75Ω CATV Amplifier is a GaAs (Gallium Arsenide) pHEMT (Pseudomorphic High-Electron-Mobility Transistor) single-ended MMIC RF amplifier featuring 15dB of gain. The QPL1818 offers a 50MHz to 1800MHz frequency range providing an ideal solution for a wide range of DOCSIS 4.0 amplifiers and nodes as well as home gateways and cable modems. The Qorvo QPL1818 […]
DFRobot DFR0756 DC-DC Fast Charge Module
https://www.electronics-lab.com/dfrobot-dfr0756-dc-dc-fast-charge-module/
DFRobot DFR0756 DC-DC Fast Charge Module integrates the most common 5V charging-recognition function and provides compatibility for more than 99% of mobile phones on the market. The charging current at the peak of this module can be triggered by the charging protocol, which greatly saves charging time. This fast-charging module is capable of providing steady […]
u-blox’s SARA-R5 LTE-M/NB-IoT Modules are secure cloud LTE solutions
https://www.electronics-lab.com/u-bloxs-sara-r5-lte-m-nb-iot-modules-are-secure-cloud-lte-solutions/
u-blox’s modules offer security-based features and services like zero-touch provisioning and secure chip-to-chip communication u-blox’s SARA-R5 series modules are secure cloud LTE Cat M1/LTE Cat NB2 solutions based on the UBX-R5 cellular chipset and the M8 GNSS receiver chip. With this combination, u-blox can offer long-term device availability and provide lifetime support of the entire […]
ICP-10111 Barometric Pressure Sensor consumes only 1.3 µA @ 1Hz
https://www.electronics-lab.com/icp-10111-barometric-pressure-sensor/
TDK Invensense’s ICP-10111 is ideal for mobile phones, wearable fitness monitoring, drones, and battery-powered IoT TDK Invensense’s ICP-10111 barometric pressure sensor is based on MEMS capacitive technology, which provides ultra-low noise at the lowest power, enabling excellent relative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressure differences with an accuracy of […]
IRR1-SOL Solar Irradiance Meter helps troubleshooting of photovoltaic installations
https://www.electronics-lab.com/irr1-sol-solar-irradiance-meter/
Fluke’s IRR1-SOL solar irradiance meter is designed to simplify the installation and troubleshooting of photovoltaic arrays in a single handheld tool Solar energy converts the sun’s energy into electricity; solar technology is improving with costs of going solar decreasing rapidly. Fluke’s IRR1-SOL solar irradiance meter provides industrial, residential and commercial installation and maintenance professionals with a single […]
LE-37O – 3.5 inch Miniboard Intel® Tiger Lake UP3 Processor
https://www.electronics-lab.com/le-37o-3-5-inch-miniboard-intel-tiger-lake-up3-processor/
Taiwan Commate Computer Inc.(COMMELL), the worldwide leader of Industrial Single Board Computers, unveiled LE-37O 3.5 inch Miniboard embedded system board based on Intel® Tiger Lake UP3 processors. The LE-37O 3.5 inch Miniboard platform is designed for Intel® Tiger Lake UP3-series processors in the FCBGA1449 sockets. support DDR4 memory (One DDR4 SO-DIMM 3200 MHz up to 32GB). The platform is based on Intel® […]
Joystick Controlled 2 x RC Servo motors – Arduino Compatible
https://www.electronics-lab.com/project/joystick-controlled-2-x-rc-servo-motors-arduino-compatible/
This project enables easy control of 2 RC servo motors using a thumb joystick. This is an Arduino compatible project and it consists of a thumb joystick, ATMEGA328 microcontroller, filter capacitor on dc supply, and other components. The thumb joystick has 2 axes, X and Y. The joystick consists of 2 x 10K potentiometers. These […]
Humidity Meter Using OLED Display – Arduino Compatible
https://www.electronics-lab.com/humidity-meter-using-oled-display-arduino-compatible/
This is an easy to build, very compact, and low profile Arduino compatible platform to build a humidity meter/Gauge using a 0.96Inch OLED display. The project consists of Atmega328 microcontroller, 0.96Inch OLED display, 3.3V regulator, and HIH5030 analog humidity sensor from Honeywell. The HIH5030 sensor provides an analog voltage output, the analog voltage is near […]
Meet AIfES, a C-based AI/ML Framework for Microcontrollers
https://www.electronics-lab.com/meet-aifes-a-c-based-ai-ml-framework-for-microcontrollers/
Increased interest in Edge computing in recent times has led to the development of several frameworks to facilitate the deployment of AI/ML models on microcontrollers. There are, however, issues of performance with most of the frameworks as they are mostly scaled-down version of server codes and as such, are only suitable for fairly powerful microcontrollers. […]
Rodriguez – The World’s Slowest IV Tracer
https://www.electronics-lab.com/rodriguez-the-worlds-slowest-iv-tracer/
Joseph Eoff has posted on Hackaday details about Rodriguez, which is an IV tracer. About the origin of the project, he says: “Rodriguez started as a nameless project I used to make a point in an online discussion about the shape of the current/voltage plot of the base/emitter junction of an NPN transistor. It’s as […]