pixxiLCD-20P2 is a 2.0″, 176×220 pixel, slim Intelligent Display Module with embedded PIXXI-28 processor
https://www.electronics-lab.com/pixxilcd-20p2-is-a-2-0-176x220-pixel-slim-intelligent-display-module-with-embedded-pixxi-28-processor/
2.0” pixxiLCD Series Intelligent Display Module with PIXXI-28 Graphics Controller The pixxiLCD-20 is part of the new and revolutionary pixxiLCD series of embedded graphics displays designed and manufactured by 4D Systems. Developed with low total cost of ownership in mind, this 2.0” colour TFT-LCD compact Intelligent Display module offers an array of functionality and options […]
Vishay’s New Proximity Sensor Offers Power Consumption Down to 6.63 µA
https://www.electronics-lab.com/vishays-new-proximity-sensor-offers-power-consumption-down-to-6-63-%c2%b5a/
Featuring a VCSEL and Small 1.6 mm Light Hole, Device is Ideal for Consumer and Industrial Applications, Including TWS Earphones and VR / AR Headsets The Optoelectronics Group of Vishay Intertechnology, Inc. today introduced a new fully integrated proximity sensor designed to increase efficiency and performance in consumer and industrial applications. Featuring a vertical-cavity surface-emitting […]
How to multiplex a 1-Wire master into numerous channels
https://www.electronics-lab.com/how-to-multiplex-a-1-wire-master-into-numerous-channels/
This is an app note from Maxim Integrated on using only one 1-wire master on multiple 1-wire channels. 1-Wire® networks are originally designed for communication with a single 1-Wire master and numerous 1-Wire slaves on a single 1-Wire bus. Preferably, a linear topology, which contains insignificant stubs, is best for a 1-Wire network. However, a […]
Würth Elektronik presents its Bluetooth module Proteus-III-SPI
https://www.electronics-lab.com/wurth-elektronik-presents-its-bluetooth-module-proteus-iii-spi/
Würth Elektronik introduces the Proteus-III-SPI Bluetooth Low Energy 5.1 module. This variant of the tried and tested Proteus-III uses an SPI instead of a UART interface. The new module, based on the Nordic Semiconductor nRF52840 chipset, exploits the possibilities of the Bluetooth Low Energy 5.1 standard—with significantly higher performance. With a payload of up to […]
Fibocom’s MA510 Module to Support 450 MHz LTE-M and NB-IoT Application
https://www.electronics-lab.com/fibocoms-ma510-module-to-support-450-mhz-lte-m-and-nb-iot-application/
Fibocom, a global leading provider of IoT (Internet of Things) wireless solution and wireless communication modules, announced that its LTE Cat M module MA510-GL supports 450 MHz spectrum to further satisfy the need for the global IoT market, promoting the allocation of the 450 MHz band. The 450MHz spectrum has risen in importance in recent […]
Axiomtek Releases the 10.4” and 12.1” Touch Panel PCs – GOT710S-837 and GOT712S-837
https://www.electronics-lab.com/axiomtek-releases-the-10-4-and-12-1-touch-panel-pcs-got710s-837-and-got712s-837/
Axiomtek – a world-renowned leader relentlessly devoted in the research, development, and manufacture of series of innovative and reliable industrial computer products of high efficiency – is pleased to introduce the GOT710S-837 and GOT712S-837, the EN 50155 and EN 45545-2 certified 10.4-inch and 12.1-inch fanless touch panel PCs for train control and rail signaling. Featuring sunlight-readable technology […]
SAPPHIRE Launches Two Ryzen V2000 based SBCs
https://www.electronics-lab.com/sapphire-launches-two-ryzen-v2000-based-sbcs/
SAPPHIRE Technology announced a new series of embedded motherboards, which are powered by the latest high-performance AMD Ryzen™ Embedded V2000 processor family built on 7nm process technology, ‘Zen 2’ cores, and high-performance AMD Radeon™ graphics. Called the SAPPHIRE V2000 BP-FP6 and FS-FP6, these embedded motherboards support multiple independent displays in 4K resolution with a stable […]
LIR1220 Battery Charger plugs in USB
https://www.electronics-lab.com/lir1220-battery-charger-plugs-in-usb/
The LIR1220 is a 12.5 mm. lithium-ion rechargeable coin cell. It is a relatively new technology. Traditionally, li-ion coin cells are non-rechargeable but for some situations, rechargeable compact cells are desired. Coin cells like CR2032 are ultra-compact and are used in a variety of compact systems like wearables and if something with this form factor […]
Easily Scale Across Multiple Processors with Aeon’s GENE-CML5 Subcompact Board
https://www.electronics-lab.com/easily-scale-across-multiple-processors-with-aeons-gene-cml5-subcompact-board/
Embedded Boards manufacturer, AAEON, some days ago announced the launch of a new embedded development board, the GENE-CML5 3.5, a subcompact board designed for next-generation industrial, and general Edge AI applications where robustness, ruggedness, and increased processing capacity are required. Designed with an understanding of flexibility and need for scale, unlike the usual fixed, soldered […]
Meet the ATMegaZero ESP32-S2 Based Development Board With RPI Zero Form Factor
https://www.electronics-lab.com/meet-the-atmegazero-esp32-s2-based-development-board-with-rpi-zero-form-factor/
Despite the recent release of the C3 and S3 versions, the ESP32-s2 has remained a fan favorite with more development boards and projects based on it, being released every now and then. One of the latest boards based on it is the ATMegaZero ESP32-S2 board developed by Espinal Lab. Modeled after their Raspberry Pi Zero […]