Broadcom AUV3-Sxxx – UV-A LEDs surface mount UV LEDs
https://www.electronics-lab.com/broadcom-auv3-sxxx-uv-a-leds-surface-mount-uv-leds/
The 3W 3535 Surface Mount UV LEDs are energy-efficient LEDs that can be driven using high currents and can dissipate heat efficiently The 3W 3535 Surface Mount UV LEDs are energy-efficient LEDs that can be driven using high currents and can dissipate heat efficiently, resulting in higher reliability. Their low-profile package design addresses a wide variety […]
MP2174C Switch Mode Converter
https://www.electronics-lab.com/mp2174c-switch-mode-converter/
MPS’ MP2174C is a 2.7 V to 5.5 V, 4 A, high-efficiency, synchronous step-down converter Monolithic Power Systems’ MP2174C is a monolithic, step-down, switch-mode converter with built-in, internal power MOSFETs. It achieves 4 A of continuous output current from a 2.7 V to 5.5 V input voltage with excellent load and line regulation. The output […]
UOLED-128-G2 – 1.5″ Smart micro OLED Display
https://www.electronics-lab.com/uoled-128-g2-1-5-smart-micro-oled-display/
The uOLED-128G2 is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embedded GOLDELOX graphics processor that delivers ‘stand-alone’ functionality to any project. Powerful graphics, text, image, animation and countless more features are built inside the GOLDELOX chip. The module is designed to […]
ezPyro SMD Dual pyroelectric sensor delivers efficiency
https://www.electronics-lab.com/ezpyro-smd-dual-pyroelectric-sensor-delivers-efficiency/
Pyreos has confirmed that its ezPyro SMD Dual is shipping in prototype form for a new wider range of substances, and benefits from all software and hardware components of the established Pyreos development ecosystem. Part of the world’s smallest and fastest family of pyroelectric sensors, the ezPyro SMD Dual collocates two thin-film PZT pyroelectric elements […]
Raspberry Pi CM3+ Based DevTerm Kit Features keyboard computer
https://www.electronics-lab.com/raspberry-pi-cm3-based-devterm-kit-features-keyboard-computer/
Clockwork has launched an open-source device, which runs Linux on a Raspberry Pi Compute Module 3+ Lite (CM3+ Lite) housed inside a keyboard chassis. ClockworkPi v3.14 integrates up to 12 interfaces in the ultra-small size of 95x77mm, ensuring sufficient connectivity for your work and entertainment. Following an easy-to-upgrade modular design of CPU and memory, CockworkPi […]
ThermoDuino – OLED Display Thermometer and Tiny Arduino Board
https://www.electronics-lab.com/thermoduino-oled-display-thermometer-and-tiny-arduino-board/
ThermoDuino is a mini Arduino compatible board that consists of LM35 temperature sensor, ATMEGA328 chip, and 0.96″ OLED display. The board has been designed to measure temperature. We have used the LM35 SO8 SMD sensor which is connected to A0 analog pin of the chip, and the OLED display is connected to A4 and A5 […]
TTGO T5: ESP32-Based Development Kit with 4.7-inch e-Paper Display
https://www.electronics-lab.com/ttgo-t5-esp32-based-development-kit-with-4-7-inch-e-paper-display/
We have been seeing some interesting packages when it comes to e-ink displays. As they establish themselves further on the market, by claiming some space that was once material for the LCD displays, the industry keeps on delivering more and more options for us, makers, to tinker with. An example of this was the M5Paper […]
Armachat NANO, an Alternative Communications Device for Catastrophes
https://www.electronics-lab.com/armachat-nano-an-alternative-communications-device-for-catastrophes/
We have seen some alternatives in the past to provide an alternative to the complex communication stack, provided via the internet through social networks or the cellular communication that our cellphones have been allowing us to do for a long time. These devices are especially useful when the internet is down or in case of […]
Power Profiler Kit II (PPK2) is a Second-Generation Current Measurement Tool for Embedded Development
https://www.electronics-lab.com/power-profiler-kit-ii-ppk2-is-a-second-generation-current-measurement-tool-for-embedded-development/
Nordic Semiconductor has announced an enhanced Power Profiler Kit II (PPK2) for profiling power consumption in embedded solutions with support for their nRF51, nRF52, nRF53 short-range wireless SoCs, and nRF91 low power cellular SiP. Since it is important to optimize applications to consume as little power as possible while developing battery-powered products, PPK2 is one […]
M5Paper – Touch Enabled e-ink Device to Bring Your IoT Projects to Life
https://www.electronics-lab.com/m5paper-touch-enabled-e-ink-device-to-bring-your-iot-projects-to-life/
We have seen e-ink displays taking over in some areas where the regular ones struggle, especially on battery-powered devices, due to their power-conservative nature in comparison to their LCD counterparts. Of course, they are different, but in many projects e-ink displays just fit! Now, today we will take a look at a very unique and […]