Arduino-Based SSD uses an ATmega8 & 8 EEPROM chips
https://www.electronics-lab.com/arduino-based-ssd-uses-atmega8-8-eeprom-chips/
“Now, instead of using an SD card to store configuration files, I can simply send commands via the UART interface to the SSD from an external board and store/retrieve data without the extra code overhead.” SD cards are used for storing information when logging data or retrieving files but with microcontrollers that have shorter RAM […]
iWave OBD II Secured Edge Analytics Enabling IoT in Fleet Management
https://www.electronics-lab.com/iwave-obd-ii-secured-edge-analytics-enabling-iot-fleet-management/
Everyone desires to own a vehicle, but the business of leading a fleet of vehicles is never an easy task. From the safety of the fleet, route optimizing, trip analysis to timely maintenance, fleet owners have a lot in their hands to deal with regularly. With the ever-increasing prices of vehicles and fuel, enterprises are […]
20 Non-Contact Infrared Reflective Sensor for Line Follower Robots
https://www.electronics-lab.com/project/20-non-contact-infrared-reflective-sensor-line-follower-robots/
This project consists of 20 non-contact infrared reflective sensors and each sensor provides an analog output. QRD114 sensor is the heart of the project which includes Infrared LED and photosensor. The output of each sensor is high and goes low as objects or lines detected. The analog output voltage is proportional to IR reflected […]
New Arduino-compatible Music Visualizer board based on ATmega328p-au makes music really beautiful
https://www.electronics-lab.com/new-arduino-compatible-music-visualizer-board-based-atmega328p-au-makes-music-really-beautiful/
Music and Electronics end up beautifully when they are perfectly combined: if you are looking for a way to synchronize RGB LEDs to music, then you have a new tool in your hands. After releasing a detailed DIY report on how to create a music visualizer with an Arduino Uno and a Sparkfun Spectrum Shield, […]
AAEON BOXER-8120AI: AI Monitoring for Fever and PPE Compliance
https://www.electronics-lab.com/aaeon-boxer-8120ai-ai-monitoring-fever-ppe-compliance/
In light of the ongoing pandemic, nations around the world are putting into place various practices to help curtail the spread of COVID-19. One common rule among these is the requirement to wear masks or personal protective equipment (PPE) out in public, as well as barring anyone with a fever. However, observing large numbers of […]
Trinamic Introduces the TMCM-1617 Servo Controller Module
https://www.electronics-lab.com/trinamic-introduces-tmcm-1617-servo-controller-module/
TRINAMIC Motion Control GmbH & Co. KG announced the TMCM-1617 single-axis servo controller module designed for servo drives with 18A RMS and 8 to 28V DC supply voltage. Achieving high-current loop frequencies to minimize current ripple, the potted module enables smaller electric drives with high dynamics, according to the company. The TMCM-1617 also supports a […]
Saelig Introduces Aaronia AARTOS Drone/UAV Detection System
https://www.electronics-lab.com/saelig-introduces-aaronia-aartos-drone-uav-detection-system/
Customizable drone detection systems with 360deg coverage, wideband sensing to 20GHz, and AI software to avoid false alarms Saelig Company, Inc. has introduced the Aaronia AARTOS Drone Detection System, which can sense airborne drone activity with a virtually unlimited detection range. The AARTOS DDS monitors the entire frequency spectrum (e.g. 100MHz – 20GHz) hundreds of […]
Combat Covin-19, JLCPCB will be here with you!
https://www.electronics-lab.com/combat-covin-19-jlcpcb-will/
JLCPCB is a leading PCB Prototype company in China are attracting increasing people around the world to be our customer and at the same time, we also get much support from them to be the Better JLCPCB, especially during such a tough period due to COVID-19. 1. JLCPCB is in production JLCPCB tried all we […]
SparkFun launches SparkX Qwiic Compatible Board to Enable Stepper Motor Control
https://www.electronics-lab.com/sparkfun-launches-sparkx-qwiic-compatible-board-enable-stepper-motor-control/
SparkFun has announced another experimental SparkX board design, which enables higher motor control on a Qwiic-compatible I2C bus, with support for a built-in emergency stop button, and the capability to drive motors requiring up to 2A. The Qwiic Step is the latest of SparkFun’s entry in the SparkX board family, which are ranges of experimental […]
Seeed Launches an innovative All-in-one Grove Beginner Kit for Arduino
https://www.electronics-lab.com/seeed-launches-innovative-one-grove-beginner-kit-arduino/
Open-Source Hardware manufacturing super-power, Seeed Studio recently announced the launch of a new All-in-one Arduino Kit for Beginners. Designed for both learners and educators, the Grove beginner kit for Arduino aims to make learning Arduino programming fun and simple. According to Seeed, the new kit was designed to help beginners overcome some of the challenges […]