MP720105 – Digital Oscilloscope, 2+1 Channel, 200 MHz, 1 GSPS, 40 Mpts for £388.00
https://www.electronics-lab.com/mp720105-digital-oscilloscope-21-channel-200-mhz-1-gsps-40-mpts-388-00/
The MP720105 from Multicomp Pro is a newly launched 200MHz, 2-channel digital storage oscilloscope, featuring 1GS/s sampling rates, 8-bits vertical resolution, an 8″ colour LCD screen, and decoding kit (RS232, SPI, I2C, CAN trigger/decode). Ultra-thin design, less space accommodation Multi-interface integration – USB host, USB device, USB port for PictBridge, LAN, AUX 8″ 800×600 high […]
IoTouch an ESP32 wireless development board with 24-Bit RGB TFTs
https://www.electronics-lab.com/iotouch-esp32-wireless-development-board-24-bit-rgb-tfts/
IoTouch is an ESP-32 based board with touchscreen capabilities. Its got an external embedded GPU interfaced with a 24 RGB TFT glass capacitive display. It is specially built for IoT applications due to its Bluetooth and WiFi features. If you need a wireless device that has a good and intuitive HMI, IoTouch was made for […]
Otter-Iron: Power Your Soldering Iron over USB-C PD
https://www.electronics-lab.com/otter-iron-power-soldering-iron-usb-c-pd/
Okay, you’ve probably seen 20 different TS-100 hacks, for example, this, this and this but this improvement by Jan Henrik is on another level. For a soldering iron, the TS-100 seems to work quite well and its popularity, having only debuted 3 years ago, speaks volumes of this. It is relatively inexpensive, comes with temperature […]
W600-PICO – A New $2 WiFi IoT Board that runs MicroPython
https://www.electronics-lab.com/w600-pico-new-2-wifi-iot-board-runs-micropython/
The beauty of capable computing is that aside from being cheap enough, it should also be good enough. While we have seen some great WiFi IoT boards like Wemos D1 mini and Lolin32, there has not been anything like the newly launched W600-PICO board from Wemos. The new W600-PICO board, based on Winner MicroW600 Arm […]
Proximity Distance Sensor using DRV5053 Hall effect Sensor
https://www.electronics-lab.com/proximity-distance-sensor-using-drv5053-hall-effect-sensor/
This is a hall sensor proximity sensor that can detect magnetic targets approaching the sensor, without physical contact with the target. This sensor also can be used to detect the distance range 0-4cm (0-40mm). The target distance can be adjusted using the onboard trimmer potentiometer. The project is built around DRV5053 magnetic field sensor and […]
Introduction to LoRa – Send data between two Arduino using LoRa
https://www.electronics-lab.com/introduction-lora-send-data-two-arduino-using-lora/
Selecting the right communication protocol is an important part of any IoT project as not being able to communicate with the server/device cloud quickly takes away the “I” in IoT and could lead to the ultimate failure of the project. Several communication protocols exist, from WiFi and Zigbee to 2G, LTE, and even satellite communications, […]
Proximity Distance Sensor using DRV5053 Hall effect Sensor
https://www.electronics-lab.com/project/proximity-distance-sensor-using-drv5053-hall-effect-sensor/
This is a hall sensor proximity sensor that can detect magnetic targets approaching the sensor, without physical contact with the target. This sensor also can be used to detect the distance range 0-4cm (0-40mm). The target distance can be adjusted using the onboard trimmer potentiometer. The project is built around DRV5053 magnetic field sensor and […]
Introduction to LoRa – Send data between two Arduino using LoRa
https://www.electronics-lab.com/project/introduction-lora-send-data-two-arduino-using-lora/
Selecting the right communication protocol is an important part of any IoT project as not being able to communicate with the server/device cloud quickly takes away the “I” in IoT and could lead to the ultimate failure of the project. Several communication protocols exist, from WiFi and Zigbee to 2G, LTE, and even satellite communications, […]
LT8228 – 100 V Bidirectional Buck or Boost DC/DC Controllers with Protection
https://www.electronics-lab.com/lt8228-100-v-bidirectional-buck-boost-dc-dc-controllers-protection/
Analog Devices’ controllers enable full functional safety if one of the batteries fail by forcing the other battery to take over Analog Devices’ LT8228 100 V bidirectional buck or boost DC/DC controllers provide sustainable power in hybrid and electric vehicle (EV) critical non-drive train subsystems by controlling 48 V and 12 V batteries with bidirectional […]
890nm 6-Element Photodiode Array features low leakage current
https://www.electronics-lab.com/890nm-6-element-photodiode-array-features-low-leakage-current/
TT Electronics/Optek’s photodiode array features a high-temperature SMD chip carrier and low leakage current. TT Electronics/Optek Technology’s OPR2100 device is a six-element photodiode that is designed to meet the needs of motor encoder applications. Designed specifically for industrial encoder applications, the OPR2100 features a high-temperature SMD chip carrier, a wide operating temperature range, and a low […]