Using Waveshare 4.3″ E-paper Display with Arduino
https://www.electronics-lab.com/project/using-waveshare-4-3-e-paper-display-arduino/
Screen technologies have evolved over the years since the cathode ray tube was first demonstrated in 1897, we have moved from plasma to LCDs, followed by LEDs, OLEDs, and more recently e-paper which is what we will look into today. Electronic paper/e-paper displays are display devices which were created to mimic the appearance of ink on […]
Infrared Thermometer with Arduino and MLX90614 Temperature Sensor
https://www.electronics-lab.com/infrared-thermometer-arduino-mlx90614-temperature-sensor/
Most of the temperature measurement techniques around the world require some sort of physical contact between the temperature sensor and the object or environment whose temperature is to be measured, but as technology advanced, this changed too. The need to be able to measure the temperature of an object without physical contact arose. This need […]
Infrared Thermometer with Arduino and MLX90614 Temperature Sensor
https://www.electronics-lab.com/project/infrared-thermometer-arduino-mlx90614-temperature-sensor/
Most of the temperature measurement techniques around the world require some sort of physical contact between the temperature sensor and the object or environment whose temperature is to be measured, but as technology advanced, this changed too. The need to be able to measure the temperature of an object without physical contact arose. This need […]
LoraDunchy – Arduino Compatibile LoRa module
https://www.electronics-lab.com/loradunchy-arduino-compatibile-lora-module/
Lora board with Arduino nano compatibile pinout and simple battery management. Small board with arduino nano compatibile pinout with power management and Murata ABZ LoRa module with STM32L0 microcontroller Features: LoRa module: Murata ABZ Single cell LiPo cell charger on-board with charging signal internally connected to PA11 (via jumper) Buck/Boost switching power supply for delivering […]
Get Paid By Sharing Your Technical Expertise With The Maker’s Community
https://www.electronics-lab.com/get-paid-sharing-technical-expertise-makers-community/
PCBWay, is a leader in the manufacture of PCB and PCBA services and a friend of the community who always have interest of the maker’s community. We have seen PCBWay has put a lot of effort providing sponsorship for PCB based projects already, but they are not stopping there. PCBWay is continuing this community grooming with […]
OPEN MOTOR CONTROL – An open source motor controller for everyone
https://www.electronics-lab.com/open-motor-control-open-source-motor-controller-everyone/
It is open source and based upon the ATmega32U4 microcontroller, and provided with drivers for two DC brush motors and a stepper motor. It receives commands via USB or serial ports, or via the I²C bus. For those dealing with robotics, one of the problems to solve is the management of the motors used for […]
Tracksoar V2 – the smallest, lightest, open source APRS tracker
https://www.electronics-lab.com/tracksoar-v2-smallest-lightest-open-source-aprs-tracker/
What is Tracksoar Tracksoar is one of the smallest, lightest, open source APRS trackers available. It makes tracking weather balloons, model rockets, RC aircraft, and anything else that flies simple and easy. It is able to report location, altitude, temperature pressure and humidity to the internet or direct to an amateur radio once a minute […]
I2C Encoder V2 – Connect multiple rotary encoders on the I2C bus
https://www.electronics-lab.com/i2c-encoder-v2-connect-multiple-rotary-encoders-i2c-bus/
I2C Encoder V2 is a tiny smart board for connecting multiple rotary encoders on the I2C bus and it’s live on kickstarter. The I2C Encoder V2 supports various type of rotary encoder with one footprint: Standard mechanical encoder Illuminated RGB encoder Clickable rotary encoder With and without dent There are also 3 configurable GPIOs that […]
Ethernet Relay board
https://www.electronics-lab.com/ethernet-relay-board/
LAN interface with 4 relays, 8 programmable I/Os and 4 analog inputs, IoT-ready. How many times have you read or heard about the Internet of things (Iot)? The Internet of things is an expression that is becoming more and more popular lately; it represents the expansion of the Internet into the world of objects and […]
A Wearable Tiny Video Pendant
https://www.electronics-lab.com/wearable-tiny-video-pendant/
The adoption of Wearables has been on the rise especially with the advent of smartwatches and smart glasses, and a growing interest in augmented and the virtual reality space. Most watches are beginning to have some level of smartness and the everyday smartwatch is becoming cheaper. For example, in the last five months, I have […]