Sensirion SEK-SCD41 CO2 Sensor Evaluation Kit
https://www.electronics-lab.com/sensirion-sek-scd41-co2-sensor-evaluation-kit/
Sensirion SEK-SCD41 CO2 Sensor Evaluation Kit enables easy plug and play evaluation of the miniaturized SCD4x sensors and facilitates prototyping. Electrical interfacing can be realized either via the through-hole pads or alternatively via the included jumper cable that connects to the integrated JST connector. The compact design measuring 28mm x 24mm x 8mm, the large […]
Maxim Integrated MAX38650 nanoPower Buck Converter
https://www.electronics-lab.com/maxim-integrated-max38650-nanopower-buck-converter/
Maxim Integrated MAX38650 nanoPower Buck Converter provides an ultra-low 390nA quiescent current and operates from a 1.8V to 5.5V input voltage. The MAX38650 supports load currents of up to 100mA with peak efficiencies of 95%. The MAX38650 offers high efficiency throughout the load range with a small total solution size. The device is ideal for […]
Maxim Integrated MAX38911 LDO Linear Regulators
https://www.electronics-lab.com/maxim-integrated-max38911-ldo-linear-regulators/
Maxim Integrated MAX38911 LDO Linear Regulators with low-power mode deliver up to a 500mA load current with only 11µVRMS of output noise from 10Hz to 100kHz. The Maxim MAX38911 Regulators are set to have a single output voltage range of 0.8V to 5.0V. The output voltage on the MAX38912 is adjustable to a value range […]
100V High-Current Photorelay Released in DIP4 Package for Industrial Equipment
https://www.electronics-lab.com/100v-high-current-photorelay-released-in-dip4-package-for-industrial-equipment/
Toshiba Electronics has released a 100 V high-current photorelay, TLP241B for industrial equipment building automation systems and mechanical relay replacements, security systems, heating, ventilation and air conditioning (HVAC), Battery Management System (BMS), etc. Encompassed in a DIP4 package, this new device comprises of a photo MOSFET optically coupled to an infrared light-emitting diode. The ability […]
Bourns MF-MSHT PTC Resettable Fuses
https://www.electronics-lab.com/bourns-mf-msht-ptc-resettable-fuses/
Bourns MF-MSHT PTC Resettable Fuses are AEC-Q200 compliant and feature a 9V to 42V voltage range and up to 1.75A current rating. The MF-MSHT series offers a broader standard high-temperature PPTC for engineers with high working temperature and power rating requirements. These fuses utilize Bourns’ innovative freeXpansion™ design, increasing the performance of the resettable fuse with […]
Panasonic Industrial Devices AQV209Gx PhotoMOS Relays
https://www.electronics-lab.com/panasonic-industrial-devices-aqv209gx-photomos-relays/
Panasonic Industrial Devices AQV209Gx PhotoMOS Relays are DIP 6-pin type with 1200V load voltage and low on-resistance of typical 1Ω. These PhotoMOS relays operate at 0.75A continuous load current. The AQV209Gx PhotoMOS relays are PCB mount relays with HF 1 Form A high capacity. These relays are capable to switch high voltage loads. The AQV209Gx relays […]
4D Imaging RoC Sensor: Interview with Vayyar’s Head of Automotive
https://www.electronics-lab.com/4d-imaging-roc-sensor-interview-with-vayyars-head-of-automotive/
The 4D imaging technology using cameras and LIDAR comes with drawbacks as the cameras are sensitive to external environmental conditions like bad light, fog, etc. Hence, the radar technology for 4D imaging allows a good resolution scan with an accurate field of view. Vayyar’s Radar on Chip (RoC) is one such example for 4D Imaging […]
Snapdragon 888 Mobile HDK runs Android 11 on Qualcomm’s latest 5nm SoC
https://www.electronics-lab.com/snapdragon-888-mobile-hdk-runs-android-11-on-qualcomms-latest-5nm-soc/
Qualcomm and Lantronix have come together to launch Snapdragon 888 Mobile Hardware Development Kit – a feature-rich Android development platform designed to provide Android app developers, hardware vendors, and original equipment manufacturers with the right software and tools needed to accelerate the development and testing of devices. The Snapdragon 888 development board is powered by Qualcomm’s Snapdragon 888 […]
IDS-310AI mini-PC with Apollo Lake SoC and dual Myriad X VPUs
https://www.electronics-lab.com/ids-310ai-mini-pc-with-apollo-lake-soc-and-dual-myriad-x-vpus/
IEI’s IDS-310AI mini-PC for AI-enabled digital signage includes Apollo Lake SoC and supports 128GB SATADOM. It comes with a built-in Mustang-MPCIE-MX2 AI accelerator card, that includes two Intel Myriad X VPUs to provide a dynamic AI inference solution. It also functions to drive three displays through its 3x HDMI. Talking more about the VPUs, the […]
H-Bridge Motor Driver with Integrated Current Sense and Regulation using DRV8874
https://www.electronics-lab.com/project/h-bridge-motor-driver-with-integrated-current-sense-and-regulation-using-drv8874/
In past, we have published many brushed dc motor driver boards for various projects and usually, they have some sort of limitations, as some of them are large in size, require large size heatsink, doesn’t have current feedback, they don’t have overload protection, some require external large size current shunt resistor and after all, recently […]