Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible
https://www.electronics-lab.com/project/radio-remote-control-led-dimmer-using-nrf24l01-arduino-compatible/
This is an easy-to-make LED dimmer using RF remote control. The project is capable of driving a load up to 24W (2A X 12V LED). Any 12V single or 12V LED strip can be used. This is an open-source Arduino compatible hardware that has Atmega328 microcontroller, Potentiometer, MOSFET, 5V Regulator, 3.3V Regulator, NRF24L01 Radio modules, […]
315Mhz RF Remote Transmitter – Arduino Compatible
https://www.electronics-lab.com/project/315mhz-rf-remote-transmitter-arduino-compatible/
This is a two-channel RF Transmitter unit that consists of, Atmega328 microcontroller, 2 Tactile switches with pull-down resistors, a programming port, and a 315Mhz RF transmitter module. It is an Arduino compatible open-source project that can be used for many RF transmitter applications. It is advisable to use 1 Foot hook-up wire as Antenna to […]
315Mhz RF Remote Receiver with On Board Relay – Arduino Compatible
https://www.electronics-lab.com/project/315mhz-rf-remote-receiver-with-on-board-relay-arduino-compatible/
This is one channel RF Receiver with an onboard Relay. The project can be used for ON/OFF control of AC or DC loads using an RF remote. It’s an Arduino compatible Receiver project that consists of, Atmega328 microcontroller, 315MHz RF Receiver, 12v Relay, 5V Regulator, etc. Arduino Pins Receiver: D3 Relay, D11 Data in from […]
4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible
https://www.electronics-lab.com/project/4-channel-315mhz-rf-remote-transmitter-arduino-compatible/
This is a 4 channel RF Transmitter unit that consists of an Atmega328 microcontroller, 4 x tactile switches with pull-down resistors, programming port, and 315Mhz RF transmitter module. It is Arduino compatible open-source project that can be used for many RF transmitter applications. It is advisable to use a 30cm hook-up wire as an antenna […]
Analog Style VU Meter on OLED Display – Arduino Compatible
https://www.electronics-lab.com/project/analog-style-vu-meter-on-oled-display-arduino-compatible/
This is an analog-style VU meter on a 0.96″ OLED Display. The project has a 0.96″ OLED display, Atmega328 Microcontroller, 3.5 mm audio EP socket for audio signal input. This Arduino compatible hardware can be program using Arduino IDE. Operating Supply 5V DC. Specifications Operating Supply: 5V DC 0.96″ OLED display Arduino Compatible PCB dimensions: […]
IR Remote Controlled Motorized Potentiometer – Arduino Compatible
https://www.electronics-lab.com/project/ir-remote-controlled-motorized-potentiometer-arduino-compatible/
This is an Infrared Remote controlled motorized potentiometer controller. It’s an open-source project built on the Arduino platform and compatible with Arduino IDE for custom programming. The project consists ATMEGA328 microcontroller, IR sensor, L293D motor driver, ALPS Motorized potentiometer, a connector for Arduino programming, etc. The L293D H-bridge drives the potentiometer motor, 2 Parallel direction […]
DC Motor Speed, Direction and Brake Control with NRF24L01 RF Module – Arduino Compatible
https://www.electronics-lab.com/project/dc-motor-speed-direction-and-brake-control-with-nrf24l01-rf-module-arduino-compatible/
This is Arduino compatible hardware that can control a single DC motor speed, direction, and brake using an RF remote control. The project is based on an ATMEGA328 microcontroller, H-Bridge DC motor driver chip LM18201, NRF24L01 RF module, 5V Regulator, 3.3V regulator and other components. This board can drive a DC Motor up to 24V […]
Single Joystick Remote Control Transmitter using NRF24L01 – Arduino Compatible
https://www.electronics-lab.com/project/single-joystick-remote-control-transmitter-using-nrf24l01-arduino-compatible/
This is an Arduino compatible open-source hardware that includes 1 x joystick, NRF24L01 RF module, Atmega328D microcontroller, 3.3V regulator, power LED, function LED, and other required components. This board can be used for the development of various applications such as Gaming, Remote RC servo driver, RC Motor controller, Robotics, and many more. Arduino Code is […]
Dual Joystick RF Remote Transmitter with NRF24L01 RF module – 2 Joystick Control
https://www.electronics-lab.com/project/dual-joystick-rf-remote-transmitter-with-nrf24l01-rf-module-2-joystick-control/
This is an Arduino compatible open-source hardware that includes 2 x Joysticks, NRF24L01 RF module, Atmega328 microcontroller, 3.3V regulator, power LED, function LED, Arduino programming connector, and other required components. This board can be used for the development of various applications such as Gaming, Remote RC servo driver, Robotics, and many more. Connector CN3 was […]
8 Channel RC Servo Driver Over RF Link using NRF24L01 RF Module – Arduino Compatible
https://www.electronics-lab.com/project/8-channel-rc-servo-driver-over-rf-link-using-nrf24l01-rf-module-arduino-compatible/
This is an easy-to-build open-source Arduino compatible board that enables driving 8 RC servos over NRF24L01 RF Link. The project can be used as a standalone RC servo driver or 8 channel RF remote-controlled RC servo Receiver. An optional OLED display option can be used to develop RC signal monitor. The tiny module contains an […]