Automotive Projects
Two Channel High-Side Switch with Current Sensing
This automotive-grade two-channel high-side switch provides a robust power management solution by integrating overcurrent, thermal, and open-load protections alongside a dedicated current-sensing function for real-time load monitoring.
High-Current Half-Bridge for Automotive Applications
This compact, high-current half-bridge driver utilizes a 2ED2184S06F gate driver and dual FDB047N10 MOSFETs to support various power applications, offering up to 10A of continuous current and flexible control interfaces for tasks like motor control and solar systems.
Ingition Coil Driver
The project presented here is an Ignition coil driver featuring FAN1100-F085 ignition gate driver chip and IGBT.
3.3V Automotive Step-Down Regulator – Low-Iq, Dual-Mode
This is a Dual Mode regulator intended for Automotive, battery-connected applications that operate with up to a 36V input supply.
Fuel Gauge with OLED Display
This project enables the measurement of fuel levels in a tank using a resistive float sensor.
Fuel Level Monitor with 15 Segments Bar-Graph Display
This Fuel level Monitor allows users to measure the fuel level using a resistive float sensor in the fuel tank.
Lamp Flasher with Timer IC and MOSFET for Automotive Applications
This is a mini flasher board that can drive high-power LED or a lamp, mainly designed for automotive applications.
Two Channel High Side Driver with Analog Sense for Automotive Applications
The project presented here is suitable for all types of resistive, inductive, and capacitive loads, and can also be used to drive LEDs.
Ground Isolation Audio Amplifier for Automotive Applications
This Ground Isolation Amplifier is developed for car and automotive applications.
Motorcycle Universal Gear Indicator
Introduction This is a new design for a universal gear indicator that can be fitted to any motorcycle as an aftermarket accessory.
Synchronized multi-spark module (SMSM) for Electronic Ignition Devices (EID)
Multi-spark ignition is very useful especially in the case of startings at low temperature and at low rpm range.
Nite Rider Lights
Description The circuit is drawn with PCB 123 which you can download for free from http://www.pcb123.com As a keen cyclist I am always looking for ways to be seen at night.