Microcontroller Projects
EEPROM Module
EEPROM Add-On Board offers an easy way to interface a standard 24Cxx type I2C EEPROM to your project.
40 & 28 PIN PIC Development Board with ICSP interface
This is a PIC 40/28 PIN (DIP) PIC Development / Evaluation board that demonstrates the capabilities of Microchips 8-bit microcontrollers, specifically, 28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices.
Frequency counter with PIC16F628A
This is a frequency counter based on PIC16F628A.
Simple timer with PIC16F628A
This is a quick project for a timer.
USB to Serial Converter using AVR microcontroller
This project is a USB to Serial converter using an ATMEL AVR microcontroller.
Original PICKIT-2 microcontroller programmer
These days I was thinking about a better PIC programmer that can work with Microchip MPLAB IDE software so that I can write my own programs or edit someone else’s programs.
8 Opto-isolated Relay board
This is a 8 channel relay interface board using ULN2803.
CAN to USB Interface
This project started out from a need to build a simple device for monitoring the CAN bus.
Serial AVR and PIC programmer
This is a dual MCU programmer which supports both AVR and PIC mcu and there is a switch to select between them.
miniLOG – Precision Standalone Voltage Logger
miniLOG is a precise standalone voltage logger that save the data on a SD card.
Serial 4-digit seven segment LED display
This project is a 7 segment LED display module that can be driven using SPI protocol, so it needs only 3 pins of your mcu to drive 4 x LED displays.
DigiPot – Rotary Encoder Digital Potentiometer
DigiPot is a digital potentiometer using a rotary encoder as input along with a 7 segment display that show the current pot value.