Projects Projects
Frequency counter with PIC16F628A
This is a frequency counter based on PIC16F628A.
Simple timer with PIC16F628A
This is a quick project for a timer.
USB to Serial Converter using AVR microcontroller
This project is a USB to Serial converter using an ATMEL AVR microcontroller.
Original PICKIT-2 microcontroller programmer
These days I was thinking about a better PIC programmer that can work with Microchip MPLAB IDE software so that I can write my own programs or edit someone else’s programs.
8 Opto-isolated Relay board
This is a 8 channel relay interface board using ULN2803.
CAN to USB Interface
This project started out from a need to build a simple device for monitoring the CAN bus.
Serial AVR and PIC programmer
This is a dual MCU programmer which supports both AVR and PIC mcu and there is a switch to select between them.
EGYDuino – Arduino compatible board
EGYDuino is a DIY Arduino clone made on a single sided PCB board.
ATmega64 Development Board
This project is a development board for Atmel ATmega64 microcontroller and can be used to easily develop custom AVR firmware or as an introduction board to microprocessors and programming.
miniLOG – Precision Standalone Voltage Logger
miniLOG is a precise standalone voltage logger that save the data on a SD card.
Serial 4-digit seven segment LED display
This project is a 7 segment LED display module that can be driven using SPI protocol, so it needs only 3 pins of your mcu to drive 4 x LED displays.
DigiPot – Rotary Encoder Digital Potentiometer
DigiPot is a digital potentiometer using a rotary encoder as input along with a 7 segment display that show the current pot value.