Low-cost LTE router for M2M/IoT applications
https://www.electronics-lab.com/low-cost-lte-router-for-m2m-iot-applications/
With the UR32L, ICP Germany expands its portfolio with a low-cost industrial cellular router variant. With its embedded intelligent functions, the UR32L has been designed for diverse M2M/IoT applications. Support for global WCDMA and 4G LTE operators facilitates installation around the globe. The UR32L is equipped with an NXP single core ARM Cortex-A7 with 528MHz […]
DR8072A embedded router board offers dual 2.5 GbE, WiFi 6 connectivity
https://www.electronics-lab.com/meet-dr8072a-wallys-latest-router-board-based-on-qualcomm-atheros-ipq8072a-ar-quad-core-cpu/
Known best for router boards like the DR6018-V3, Suzhou-based embedded wireless solutions manufacturer, Wallys Communication, recently added a new router board; the DR8072A, to their impressive list of wireless solutions. Wallys has in recent times been developing a growing number of router boards based on several Qualcomm SOCs and this latest board is no different. […]
Reboot-o-matic is an Automatic power-cycling microcontroller and a DC power interrupting watchdog
https://www.electronics-lab.com/reboot-o-matic-is-an-automatic-power-cycling-microcontroller-and-a-dc-power-interrupting-watchdog/
Nick Sayer has posted on Hackaday his recent project, the Reboot-o-matic, which is a Automatic power-cycling microcontroller. The inspiration for the project came when he saw the need to monitor remotely some home automation devices in their vacation home over the internet remotely, but the router was not 100% reliable, so there were occasions where the Internet […]
Convert a $20 Router To Home Automation Gateway For IoT Devices
https://www.electronics-lab.com/convert-20-router-home-automation-gateway-iot-devices/
WiFi based home automation products are cheaper compared to ZigBee or Z-Wave products, but the downside is that WiFi devices need an internet connection to perform their function. A lot of those IoT devices don’t just communicate on your local network, they also talk to the outside world via the internet. IoT devices like simple […]
Make Smart WiFi Router Using Raspberry Pi 3
https://www.electronics-lab.com/make-smart-wifi-router-using-raspberry-pi-3/
Here’s how to make a smart WiFi router using the Raspberry Pi 3. by Mehedi Shakeel: In this video, I will show you how to make a smart WiFi router using the Raspberry Pi 3. This tutorial provides a step by step guide on how to set up the Raspberry Pi as a hotspot and […]
Banana Pi BPI-W2 SBC – A Multimedia Router And NAS Board That Runs Android Or Linux
https://www.electronics-lab.com/banana-pi-bpi-w2-sbc-multimedia-router-nas-board-runs-android-linux/
SinoVoip has released Banana Pi BPI-W2 multimedia network and smart NAS router SBC. The BPI-W2 has a faster processor and more advanced features than last year’s Banana Pi BPI-R2. However, the new model has only two Gigabit Ethernet ports instead of four. This SBC is designed for applications such as high wireless performance, home entertainment, home automation, and […]
$4 Coin-sized Linux Computer with WiFi
https://www.electronics-lab.com/4-coin-sized-linux-computer-wifi/
VoCore is a small Linux computer with Wifi that can work as a full functional router. It runs OpenWrt on top of Linux. It contains 32MB SDRAM, 8MB SPI Flash and uses RT5350 (360 MHz MIPS) as its heart. It provides many interfaces such as 10/100M Ethernet, USB, UART, I2C, I2S, PCM, JTAG and over […]
Parallel Port Breakout board with Buffer for CNC & Routers
https://www.electronics-lab.com/parallel-port-breakout-board-buffer-cnc-routers/
Parallel port I/O break out board designed for Hobby CNC, Routers and Motion controller , This Board is an easy solution to driver stepper Motor driver, AC Servo (with Step-DIR Driver) and DC servo (with Step-DIR Driver), The Board is compatible with various CNC software specially made for LPT port data out. The board has […]
AutoResetRRR – Automatically reset routers/cameras/servers
https://www.electronics-lab.com/autoresetrrr-automatically-reset-routerscamerasservers/
“bogdan” published a new project, a device able to automatically reset your router, camera or server. AutoResetRRR is a kind electronic frustration reducing device: it cuts the power periodically to devices that can go nuts (routers, net cams, servers), but it does give a heads up. If all is well, they can shut down safely […]
Optically Isolated LPT Breakout Board for CNC & Routers
https://www.electronics-lab.com/optically-isolated-lpt-breakout-board-cnc-routers/
Optically isolated parallel port break out board designed for Hobby CNC, Routers and Motion controller, This Board is an easy solution to drive stepper Motor driver through PC parallel port, The Board is compatible with various CNC software specially made for LPT port data output. The board has been tested with MACH3 CNC software. […]